Chapter NR 273

NR 273.051(4) (4) Forging spent lubricants;

NR 273.051(5) (5) Metal powder production floor wash wastewater;

NR 273.051(6) (6) Metal powder pressing spent lubricants;

NR 273.051(7) (7) Sawing and grinding spent neat oils; and

NR 273.051(8) (8) Degreasing spent solvents.

NR 273.051 History History: Cr. Register, September, 1990, No. 417, eff. 10-1-90.

NR 273.052 NR 273.052 Effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available. Except as provided in 40 CFR 125.30 to 125.32, any existing point source subject to this subchapter shall achieve the following effluent limitations representing the degree of effluent reduction attainable by application of BPT:

NR 273.052 History History: Cr. Register, September, 1990, No. 417, eff. 10-1-90.

NR 273.053 NR 273.053 Effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable. Except as provided in 40 CFR 125.30 to 125.32, any existing point source subject to this subchapter shall achieve the following effluent limitations representing the degree of effluent reduction attainable by application of BAT:

NR 273.053 History History: Cr. Register, September, 1990, No. 417, eff. 10-1-90.

NR 273.054 NR 273.054 New source performance standards. Any new source subject to this subchapter shall achieve the following standards:

NR 273.054 History History: Cr. Register, September, 1990, No. 417, eff. 10-1-90.

NR 273.055 NR 273.055 Pretreatment standards for existing sources. Except as provided in ss. NR 211.13 and 211.14, any existing source subject to this subchapter which introduces pollutants into a POTW shall comply with ch. NR 211 and achieve the limitations set forth in s. NR 273.053.

NR 273.055 History History: Cr. Register, September, 1990, No. 417, eff. 10-1-90.

NR 273.056 NR 273.056 Pretreatment standards for new sources. Except as provided in s. NR 211.13, any new source subject to this subchapter which introduces pollutants into a POTW shall comply with ch. NR 211 and achieve the limitations set forth in s. NR 273.053.

NR 273.056 History History: Cr. Register, September, 1990, No. 417, eff. 10-1-90.

subch. VI of ch. NR 273 Subchapter VI — Titanium

NR 273.06 NR 273.06 Applicability; description of the titanium subcategory. This subchapter applies to the discharge of pollutants to waters of the state and the introduction of pollutants into POTWs from titanium forming.

NR 273.06 History History: Cr. Register, September, 1990, No. 417, eff. 10-1-90.

NR 273.061 NR 273.061 Discharge prohibitions. Any facility subject to this subchapter may not discharge process wastewater pollutants from the following sources:

NR 273.061(1) (1) Rolling spent neat oils;

NR 273.061(2) (2) Drawing spent neat oils;

NR 273.061(3) (3) Extrusion spent neat oils;

NR 273.061(4) (4) Forging spent lubricants;

NR 273.061(5) (5) Tube reducing spent lubricants;

NR 273.061(6) (6) Heat treatment contact cooling water;

NR 273.061(7) (7) Sawing or grinding spent neat oils; and

NR 273.061(8) (8) Degreasing spent solvents.

NR 273.061 History History: Cr. Register, September, 1990, No. 417, eff. 10-1-90.

NR 273.062 NR 273.062 Effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available. Except as provided in 40 CFR 125.30 to 125.32, any existing point source subject to this subchapter shall achieve the following effluent limitations representing the degree of effluent reduction attainable by application of BPT:

NR 273.062 History History: Cr. Register, September, 1990, No. 417, eff. 10-1-90.

NR 273.063 NR 273.063 Effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable. Except as provided in 40 CFR 125.30 to 125.32, any existing point source subject to this subchapter shall achieve the following effluent limitations representing the degree of effluent reduction attainable by application of BAT:

NR 273.063 History History: Cr. Register, September, 1990, No. 417, eff. 10-1-90.

NR 273.064 NR 273.064 New source performance standards. Any new source subject to this subchapter shall achieve the following standards:

NR 273.064 History History: Cr. Register, September, 1990, No. 417, eff. 10-1-90.

NR 273.065 NR 273.065 Pretreatment standards for existing sources. Except as provided in ss. NR 211.13 and 211.14, any existing source subject to this subchapter which introduces pollutants into a POTW shall comply with ch. NR 211 and achieve the limitations set forth in s. NR 273.063.

NR 273.065 History History: Cr. Register, September, 1990, No. 417, eff. 10-1-90.

NR 273.066 NR 273.066 Pretreatment standards for new sources. Except as provided in s. NR 211.13, any new source subject to this subchapter which introduces pollutants into a POTW shall comply with ch. NR 211 and achieve the limitations set forth in s. NR 273.063.

NR 273.066 History History: Cr. Register, September, 1990, No. 417, eff. 10-1-90.

subch. VII of ch. NR 273 Subchapter VII — Uranium

NR 273.07 NR 273.07 Applicability; description of the uranium subcategory. This subchapter applies to the discharge of pollutants to waters of the state and the introduction of pollutants into POTWs from uranium forming.

NR 273.07 History History: Cr. Register, September, 1990, No. 417, eff. 10-1-90.

NR 273.071 NR 273.071 Discharge prohibitions. Any facility subject to this subchapter may not discharge process wastewater pollutants from the following sources:

NR 273.071(1) (1) Extrusion spent lubricants;

NR 273.071(2) (2) Forging spent lubricants; and

NR 273.071(3) (3) Degreasing spent solvents.

NR 273.071 History History: Cr. Register, September, 1990, No. 417, eff. 10-1-90.

NR 273.072 NR 273.072 Effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available. Except as provided in 40 CFR 125.30 to 125.32, any existing point source subject to this subchapter shall achieve the following effluent limitations representing the degree of effluent reduction attainable by application of BPT:

NR 273.072 History History: Cr. Register, September, 1990, No. 417, eff. 10-1-90.

NR 273.073 NR 273.073 Effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable. Except as provided in 40 CFR 125.30 to 125.32, any existing point source subject to this subchapter shall achieve the following effluent limitations representing the degree of effluent reduction attainable by application of BAT:

NR 273.073 History History: Cr. Register, September, 1990, No. 417, eff. 10-1-90.

NR 273.074 NR 273.074 New source performance standards. Any new source subject to this subchapter shall achieve the following standards:

NR 273.074 History History: Cr. Register, September, 1990, No. 417, eff. 10-1-90.

NR 273.076 NR 273.076 Pretreatment standards for new sources. Except as provided in s. NR 211.13, any new source subject to this subchapter which introduces pollutants into a POTW shall comply with ch. NR 211 and achieve the limitations set forth in s. NR 273.073.

NR 273.076 History History: Cr. Register, September, 1990, No. 417, eff. 10-1-90.

subch. VIII of ch. NR 273 Subchapter VIII — Zinc

NR 273.08 NR 273.08 Applicability; description of the zinc subcategory. This subchapter applies to the discharge of pollutants to waters of the state and the introduction of pollutants into POTWs from zinc forming.

NR 273.08 History History: Cr. Register, September, 1990, No. 417, eff. 10-1-90.

NR 273.081 NR 273.081 Discharge prohibitions. Any facility subject to this subchapter may not discharge process wastewater pollutants from the following sources:

NR 273.081(1) (1) Rolling spent neat oils;

NR 273.081(2) (2) Stationary casting contact cooling water; and

NR 273.081(3) (3) Degreasing spent solvents.

NR 273.081 History History: Cr. Register, September, 1990, No. 417, eff. 10-1-90.

NR 273.082 NR 273.082 Effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available. Except as provided in 40 CFR 125.30 to 125.32, any existing point source subject to this subchapter shall achieve the following effluent limitations representing the degree of effluent reduction attainable by application of BPT:

NR 273.082 History History: Cr. Register, September, 1990, No. 417, eff. 10-1-90.

NR 273.083 NR 273.083 Effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable. Except as provided in 40 CFR 125.30 to 125.32, any existing point source subject to this subchapter shall achieve the following effluent limitations representing the degree of effluent reduction attainable by application of BAT:

NR 273.083 History History: Cr. Register, September, 1990, No. 417, eff. 10-1-90.

NR 273.084 NR 273.084 New source performance standards. Any new source subject to this subchapter shall achieve the following standards:

NR 273.084 History History: Cr. Register, September, 1990, No. 417, eff. 10-1-90.

NR 273.086 NR 273.086 Pretreatment standards for new sources. Except as provided in s. NR 211.13, any new source subject to this subchapter which introduces pollutants into a POTW shall comply with ch. NR 211 and achieve the limitations set forth in s. NR 273.083.

NR 273.086 History History: Cr. Register, September, 1990, No. 417, eff. 10-1-90.

subch. IX of ch. NR 273 Subchapter IX — Zirconium-Hafnium

NR 273.09 NR 273.09 Applicability; description of the zirconium-hafnium subcategory. This subchapter applies to the discharge of pollutants to waters of the state and the introduction of pollutants into POTWs from zirconium-hafnium forming.

NR 273.09 History History: Cr. Register, September, 1990, No. 417, eff. 10-1-90.

NR 273.091 NR 273.091 Discharge prohibitions.

NR 273.091(1) (1) Any facility subject to this subchapter may not discharge process wastewater pollutants from the following sources:

NR 273.091(1)(a) (a) Rolling spent neat oils;

NR 273.091(1)(b) (b) Drawing spent lubricants;

NR 273.091(1)(c) (c) Extrusion spent emulsions;

NR 273.091(1)(d) (d) Swaging spent neat oils;

NR 273.091(1)(e) (e) Wet air pollution control scrubber blowdown;

NR 273.091(1)(f) (f) Degreasing spent solvents;

NR 273.091(1)(g) (g) Degreasing rinse; and

NR 273.091(1)(h) (h) Swaging or grinding spent neat oils.

NR 273.091(2) (2) Tube reducing spent lubricants.

NR 273.091(2)(a) (a) Tube reducing spent lubricant process wastewater pollutants may not be discharged, except as provided in par. (b).

NR 273.091(2)(b) (b) Tube reducing spent lubricant process wastewater pollutants may be discharged, with no allowance for any pollutants discharged, if the facility owner or operator demonstrates according to pars. (c), (d), (e), and (f) that the concentrations of nitrosamine compounds in the discharged wastewater do not exceed the following levels:

NR 273.091(2)(c) (c) For the demonstration required by par. (b), the facility owner or operator shall use the analytical methods approved by ch. NR 219, Table C.

NR 273.091(2)(d) (d) The demonstration required by par. (b) shall be made once per month until the demonstration has been made for all 3 nitrosamine compounds for 6 consecutive months. After this time, the demonstration may be made once per quarter. If a sample is found to contain any of the 3 nitrosamine compounds at concentrations greater than those specified in par. (b), the actions set forth in par. (e) shall be taken and the demonstration required by par. (b) shall be made once per month until it has been made for all 3 nitrosamine compounds for 6 consecutive months.