This is the preview version of the Wisconsin State Legislature site.
Please see http://docs.legis.wisconsin.gov for the production version.
NR 273.036NR 273.036Pretreatment standards for new sources. Except as provided in s. NR 211.13, any new source subject to this subchapter which introduces pollutants into a POTW shall comply with ch. NR 211 and achieve the limitations set forth in s. NR 273.033.
NR 273.036 HistoryHistory: Cr. Register, September, 1990, No. 417, eff. 10-1-90.
subch. IV of ch. NR 273Subchapter IV — Precious Metals
NR 273.04NR 273.04Applicability; description of the precious metals subcategory. This subchapter applies to the discharge of pollutants to waters of the state and the introduction of pollutants into POTWs from precious metals forming.
NR 273.04 HistoryHistory: Cr. Register, September, 1990, No. 417, eff. 10-1-90.
NR 273.041NR 273.041Discharge prohibitions. Any facility subject to this subchapter may not discharge process wastewater pollutants from the following sources:
NR 273.041(1)(1)Rolling spent neat oils;
NR 273.041(2)(2)Drawing spent neat oils;
NR 273.041(3)(3)Stationary casting contact cooling water;
NR 273.041(4)(4)Wet air pollution control scrubber blowdown;
NR 273.041(5)(5)Sawing or grinding spent neat oils; and
NR 273.041(6)(6)Degreasing spent solvents.
NR 273.041 HistoryHistory: Cr. Register, September, 1990, No. 417, eff. 10-1-90.
NR 273.042NR 273.042Effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available. Except as provided in 40 CFR 125.30 to 125.32, any existing point source subject to this subchapter shall achieve the following effluent limitations representing the degree of effluent reduction attainable by application of BPT:
NR 273.042 HistoryHistory: Cr. Register, September, 1990, No. 417, eff. 10-1-90.
NR 273.043NR 273.043Effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable. Except as provided in 40 CFR 125.30 to 125.32, any existing point source subject to this subchapter shall achieve the following effluent limitations representing the degree of effluent reduction attainable by application of BAT:
NR 273.043 HistoryHistory: Cr. Register, September, 1990, No. 417, eff. 10-1-90.
NR 273.044NR 273.044New source performance standards. Any new source subject to this subchapter shall achieve the following standards:
NR 273.044 HistoryHistory: Cr. Register, September, 1990, No. 417, eff. 10-1-90.
NR 273.045NR 273.045Pretreatment standards for existing sources. Except as provided in ss. NR 211.13 and 211.14, any existing source subject to this subchapter which introduces pollutants into a POTW shall comply with ch. NR 211 and achieve the limitations set forth in s. NR 273.043.
NR 273.045 HistoryHistory: Cr. Register, September, 1990, No. 417, eff. 10-1-90.
NR 273.046NR 273.046Pretreatment standards for new sources. Except as provided in s. NR 211.13, any new source subject to this subchapter which introduces pollutants into a POTW shall comply with ch. NR 211 and achieve the limitations set forth in s. NR 273.043.
subch. V of ch. NR 273Subchapter V — Refractory Metals
NR 273.05NR 273.05Applicability; description of the refractory metals subcategory. This subchapter applies to the discharge of pollutants to waters of the state and the introduction of pollutants into POTWs from refractory metals forming.
NR 273.05 HistoryHistory: Cr. Register, September, 1990, No. 417, eff. 10-1-90.
NR 273.051NR 273.051Discharge prohibitions. Any facility subject to this subchapter may not discharge process wastewater pollutants from the following sources:
NR 273.051(1)(1)Rolling spent neat oils and graphite based lubricants;
NR 273.051(2)(2)Drawing spent lubricants;
NR 273.051(3)(3)Extrusion spent lubricants;
NR 273.051(4)(4)Forging spent lubricants;
NR 273.051(5)(5)Metal powder production floor wash wastewater;
NR 273.051(6)(6)Metal powder pressing spent lubricants;
NR 273.051(7)(7)Sawing and grinding spent neat oils; and
NR 273.051(8)(8)Degreasing spent solvents.
NR 273.051 HistoryHistory: Cr. Register, September, 1990, No. 417, eff. 10-1-90.
NR 273.052NR 273.052Effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available. Except as provided in 40 CFR 125.30 to 125.32, any existing point source subject to this subchapter shall achieve the following effluent limitations representing the degree of effluent reduction attainable by application of BPT:
NR 273.052 HistoryHistory: Cr. Register, September, 1990, No. 417, eff. 10-1-90.
NR 273.053NR 273.053Effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable. Except as provided in 40 CFR 125.30 to 125.32, any existing point source subject to this subchapter shall achieve the following effluent limitations representing the degree of effluent reduction attainable by application of BAT:
NR 273.053 HistoryHistory: Cr. Register, September, 1990, No. 417, eff. 10-1-90.
NR 273.054NR 273.054New source performance standards. Any new source subject to this subchapter shall achieve the following standards:
NR 273.054 HistoryHistory: Cr. Register, September, 1990, No. 417, eff. 10-1-90.
NR 273.055NR 273.055Pretreatment standards for existing sources. Except as provided in ss. NR 211.13 and 211.14, any existing source subject to this subchapter which introduces pollutants into a POTW shall comply with ch. NR 211 and achieve the limitations set forth in s. NR 273.053.
NR 273.055 HistoryHistory: Cr. Register, September, 1990, No. 417, eff. 10-1-90.
NR 273.056NR 273.056Pretreatment standards for new sources. Except as provided in s. NR 211.13, any new source subject to this subchapter which introduces pollutants into a POTW shall comply with ch. NR 211 and achieve the limitations set forth in s. NR 273.053.
NR 273.056 HistoryHistory: Cr. Register, September, 1990, No. 417, eff. 10-1-90.
subch. VI of ch. NR 273Subchapter VI — Titanium
NR 273.06NR 273.06Applicability; description of the titanium subcategory. This subchapter applies to the discharge of pollutants to waters of the state and the introduction of pollutants into POTWs from titanium forming.
NR 273.06 HistoryHistory: Cr. Register, September, 1990, No. 417, eff. 10-1-90.
NR 273.061NR 273.061Discharge prohibitions. Any facility subject to this subchapter may not discharge process wastewater pollutants from the following sources:
NR 273.061(1)(1)Rolling spent neat oils;
NR 273.061(2)(2)Drawing spent neat oils;
NR 273.061(3)(3)Extrusion spent neat oils;
NR 273.061(4)(4)Forging spent lubricants;
NR 273.061(5)(5)Tube reducing spent lubricants;
NR 273.061(6)(6)Heat treatment contact cooling water;
NR 273.061(7)(7)Sawing or grinding spent neat oils; and
NR 273.061(8)(8)Degreasing spent solvents.
NR 273.061 HistoryHistory: Cr. Register, September, 1990, No. 417, eff. 10-1-90.
NR 273.062NR 273.062Effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available. Except as provided in 40 CFR 125.30 to 125.32, any existing point source subject to this subchapter shall achieve the following effluent limitations representing the degree of effluent reduction attainable by application of BPT:
NR 273.062 HistoryHistory: Cr. Register, September, 1990, No. 417, eff. 10-1-90.
NR 273.063NR 273.063Effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable. Except as provided in 40 CFR 125.30 to 125.32, any existing point source subject to this subchapter shall achieve the following effluent limitations representing the degree of effluent reduction attainable by application of BAT:
NR 273.063 HistoryHistory: Cr. Register, September, 1990, No. 417, eff. 10-1-90.
NR 273.064NR 273.064New source performance standards. Any new source subject to this subchapter shall achieve the following standards:
NR 273.064 HistoryHistory: Cr. Register, September, 1990, No. 417, eff. 10-1-90.
NR 273.065NR 273.065Pretreatment standards for existing sources. Except as provided in ss. NR 211.13 and 211.14, any existing source subject to this subchapter which introduces pollutants into a POTW shall comply with ch. NR 211 and achieve the limitations set forth in s. NR 273.063.
NR 273.065 HistoryHistory: Cr. Register, September, 1990, No. 417, eff. 10-1-90.
NR 273.066NR 273.066Pretreatment standards for new sources. Except as provided in s. NR 211.13, any new source subject to this subchapter which introduces pollutants into a POTW shall comply with ch. NR 211 and achieve the limitations set forth in s. NR 273.063.
NR 273.066 HistoryHistory: Cr. Register, September, 1990, No. 417, eff. 10-1-90.
subch. VII of ch. NR 273Subchapter VII — Uranium
NR 273.07NR 273.07Applicability; description of the uranium subcategory. This subchapter applies to the discharge of pollutants to waters of the state and the introduction of pollutants into POTWs from uranium forming.
NR 273.07 HistoryHistory: Cr. Register, September, 1990, No. 417, eff. 10-1-90.
NR 273.071NR 273.071Discharge prohibitions. Any facility subject to this subchapter may not discharge process wastewater pollutants from the following sources:
NR 273.071(1)(1)Extrusion spent lubricants;
NR 273.071(2)(2)Forging spent lubricants; and
NR 273.071(3)(3)Degreasing spent solvents.
NR 273.071 HistoryHistory: Cr. Register, September, 1990, No. 417, eff. 10-1-90.
NR 273.072NR 273.072Effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available. Except as provided in 40 CFR 125.30 to 125.32, any existing point source subject to this subchapter shall achieve the following effluent limitations representing the degree of effluent reduction attainable by application of BPT:
NR 273.072 HistoryHistory: Cr. Register, September, 1990, No. 417, eff. 10-1-90.
NR 273.073NR 273.073Effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable. Except as provided in 40 CFR 125.30 to 125.32, any existing point source subject to this subchapter shall achieve the following effluent limitations representing the degree of effluent reduction attainable by application of BAT:
NR 273.073 HistoryHistory: Cr. Register, September, 1990, No. 417, eff. 10-1-90.
NR 273.074NR 273.074New source performance standards. Any new source subject to this subchapter shall achieve the following standards:
NR 273.074 HistoryHistory: Cr. Register, September, 1990, No. 417, eff. 10-1-90.
NR 273.076NR 273.076Pretreatment standards for new sources. Except as provided in s. NR 211.13, any new source subject to this subchapter which introduces pollutants into a POTW shall comply with ch. NR 211 and achieve the limitations set forth in s. NR 273.073.
NR 273.076 HistoryHistory: Cr. Register, September, 1990, No. 417, eff. 10-1-90.
subch. VIII of ch. NR 273Subchapter VIII — Zinc
NR 273.08NR 273.08Applicability; description of the zinc subcategory. This subchapter applies to the discharge of pollutants to waters of the state and the introduction of pollutants into POTWs from zinc forming.
NR 273.08 HistoryHistory: Cr. Register, September, 1990, No. 417, eff. 10-1-90.
NR 273.081NR 273.081Discharge prohibitions. Any facility subject to this subchapter may not discharge process wastewater pollutants from the following sources:
NR 273.081(1)(1)Rolling spent neat oils;
Loading...
Loading...
Published under s. 35.93, Stats. Updated on the first day of each month. Entire code is always current. The Register date on each page is the date the chapter was last published.