A-382.31 (4)-1. WHERE A VENT STACK AND STACK VENT ARE REQUIRED.
A-382.31 (4)-2. INSTALLATION OF VENT STACK AND STACK VENT.
A-382.31 (5) (a) VENTING OFFSETS OF 30 TO 45 DEGREES.
A-382.31 (5) (b) VENTS FOR OFFSETS OF MORE THAN 45 DEGREES.
A-382.31 (7) RELIEF VENTS FOR BUILDING DRAINS.
A-382.31 (9) FIXTURE VENTS.
A-382.31 (10)-1. CIRCUIT VENTING.
A-382.31 (10)-2. CIRCUIT VENTING.
A-382.31 (10)-3. CIRCUIT VENTING.
A-382.31 (10)-4. CIRCUIT VENTING.
A-382.31 (11) (a) COMMON VENTS, VERTICAL, SERVING ANY TWO FIXTURES.
A-382.31 (11) (b) COMMON VENTS, HORIZONTAL DRAINS.
A-382.31 (12) RETURN VENTS.
A-382.31 (13) (a) VERTICAL WET VENTS.
A-382.31 (13)-1. HORIZONTAL WET VENTS.
A-382.31 (14) (a) and (b) SIZING VENT STACKS AND STACK VENTS
A-382.31 (14) (c) SIZING BRANCH VENTS SERVING A WET VENT.
A-382.31 (14) (d) SIZING INDIVIDUAL VENTS.
A-382.31 (15) (a) VENT GRADES AND CONNECTIONS.
A-382.31 (15) (b) VENT GRADES AND CONNECTIONS.
A-382.31 (16) VENT TERMINALS.
VENTS TERMINATING THROUGH WALLS
A-382.31 (17) (a) COMBINATION DRAIN AND VENT STACKS.
A-382.31 (17) (c) COMBINATION DRAIN AND VENT LABORATORY SINK VENTING.
A-382.32 (4) (b) INSTALLATION OF TRAPS.
A-382.33 (6)-2. LOCAL WASTE PIPING.
A-382.33 (7) AIR-GAPS AND AIR-BREAKS.
A-382.33 (8) (a) WASTE SINKS AND STANDPIPES.
A-382.33 (8) (b) FLOOR SINKS.
A-382.33 (8) (b) Floor sink with grate opening.
A-382.33 (8) (c)–1. Local waste piping.
A-382.33 (8) (c)-2. LOCAL WASTE PIPING
A-382.33 (8) (d)-1. LOCAL WASTE PIPING SERVING WATER HEATER TEMPERATURE AND PRESSURE RELIEF VALVES.
A-382.33 (8) (d)-2. LOCAL WASTE PIPING SERVING WATER HEATER TEMPERATURE AND PRESSURE RELIEF VALVES
A-382.33 (9) (c) COMMERCIAL GRAVITY DISCHARGE-TYPE CLOTHES WASHERS.
