ATCP 76.19(1)(1)
Water supply protection. A minimum air gap of 2 pipe diameters or 6 inches, whichever is less, shall exist between the potable water supply inlet and the overflow point of any pool, makeup tank, surge tank, solution tank, or slurry tank unless another approved backflow and backsiphonage prevention device is
provided.
P
ATCP 76.19(2)
(2)
Water source. The water supplied to a pool shall be from a source approved by the Wisconsin department of natural resources pursuant to ch.
NR 108,
811, or
812.
P
ATCP 76.19(3)
(3)
Water level. Proper water level shall be maintained at all times when
the
pool
is
open.
Pf
ATCP 76.19(3)(a)
(a)
Skimmers. Water levels
in
pools
with
skimmers shall be maintained at a level such that the weir is half submerged or in the case of a floating weir, used according to manufacturer's directions.
Pf
ATCP 76.19(3)(b)
(b)
Gutters. Pools
designed
with
gutters
shall
have
a
continuous
water
supply over the gutter to provide effective
skimming.
Pf
ATCP 76.19(4)(a)1.1. An accurate thermometer shall be located in
the
pool
water
return
line.
Pf
ATCP 76.19(4)(a)2.
2. The thermometer shall be accessible for observation by the operator.
Pf
ATCP 76.19(4)(b)1.1. Except
as
provided
in
par.
(d),
the
water
temperature
of
an indoor pool shall be between 70
°F or 21
°C and 90
°F or 32
°C.
P
ATCP 76.19(4)(b)2.
2. The minimum water temperature for an outdoor pool shall be 65
°F
or 18
°C.
P
ATCP 76.19(4)(c)
(c)
Whirlpool water temperature. The water temperature in a whirlpool shall be greater than 90
°F or 32
°C, and may not exceed 104
°F or 40
°C.
P
ATCP 76.19(4)(d)1.1. Cold soak pools may be operated at a lower temperature than specified under
par. (b).
ATCP 76.19 History
History: CR 22-021: cr.
Register June 2023 No. 810, eff. 9-24-23.
ATCP 76.20(1)(a)(a)
General requirement. Each pool shall be under the supervision of at least one operator, except that if multiple pools are located on the same premise, and licensed by the same person, they may be supervised by one operator.
Pf
ATCP 76.20(1)(b)
(b)
Operator responsibilities. Each operator shall be responsible
for
pool
operation
and
maintenance
including
equipment
shut-down, backwashing, daily maintenance and vacuuming, and maintenance of water quality pursuant to ch.
ATCP 76.
Pf
ATCP 76.20(2)(a)1.1. Each water attraction or multiple water attractions on the same premise shall
have
at
least
one
certified operator.
Pf
ATCP 76.20(2)(a)2.
2. An owner of a pool who demonstrates a lack of active managerial control over the pool operation by having 2 or more reinspections in a 3-year period is required to have a certified operator.
Pf
ATCP 76.20(2)(a)3.
3. Pool operator certification for a water attraction shall be obtained within 90 days of receiving a new license or a pool meeting the conditions under subd.
2. Pf
ATCP 76.20(2)(a)3.a.
a. A pool that is required to have a certified operator under subd. 2, may contract with a certified operator.
ATCP 76.20(2)(a)4.
4. The owner of a pool shall replace a certified operator within 90 days after a certified operator's departure.
Pf
ATCP 76.20(2)(b)
(b)
Certified operator duties. A certified operator is responsible for all of the following:
ATCP 76.20(2)(c)
(c)
Documentation of certification. A current copy of the certified operator's certification
shall
be
maintained
at
the pool.
Pf
ATCP 76.20 History
History: CR 22-021: cr.
Register June 2023 No. 810, eff. 9-24-23.
ATCP 76.21(1)(a)(a)
Supervision. Each pool shall
be
under
the
supervision
of
at
least
one
responsible
supervisor at
all
times
when
the
pool
is
in
use
or
is
open
to
the
public.
P
ATCP 76.21(1)(b)
(b)
Availability. The responsible supervisor
shall
be
on
the
premises
or
immediately available
via
a phone number posted by the emergency phone and shall respond to an unsafe or
unsanitary
condition
within 15 minutes, at
any
time
the
pool
is
open
for
use.
P
ATCP 76.21(1)(c)
(c)
Duties. The
responsible
supervisor
shall ensure all of the following:
ATCP 76.21(1)(c)6.
6. Monthly secondary anti-entrapment device testing is performed, if applicable.
P
ATCP 76.21(1)(c)9.
9. The
rope separating the shallow and deep portions of the pool
is
in
place during required
times.
P
ATCP 76.21(1)(c)11.
11. A pool cover or blanket, if provided, does not pose a safety hazard to patrons.
P
ATCP 76.21 History
History: CR 22-021: cr.
Register June 2023 No. 810, eff. 9-24-23.
ATCP 76.22(1)(1)
Lifeguard and attendant staffing plans. A pool that is not required to have an attendant or lifeguard is not required to have a lifeguard or attendant staffing plan.
ATCP 76.22(1)(a)
(a)
Staffing plan requirements. The owner or operator of
a
pool,
including
a
whirlpool
over
4
feet
deep
and
a
pool
with a visual obstruction, shall
have
a
written
lifeguard and attendant staffing plan.
Pf
ATCP 76.22(1)(b)
(b)
Plan criteria. The written lifeguard and attendant staffing plan shall include all of the following:
ATCP 76.22(1)(b)4.
4. The location of each lifeguard station, lifeguard roaming or walking patrol ensuring that glare conditions are assessed from each location to determine if the bottom and objects in the pool are clearly visible.
Pf
ATCP 76.22(1)(b)7.
7. Diagrams shall be provided with the following information for each use of the pool, for both average and maximum capacity:
ATCP 76.22(1)(b)8.
8. A
method
of
communication
when
2
or
more
attendants
or lifeguards are required.
Pf
ATCP 76.22(1)(b)9.
9. If applicable, the method that will be used for periodic supervision within a pool enclosure that contains a combination of lifeguarded and non-lifeguarded pools.
Pf
ATCP 76.22(1)(c)
(c)
Availability. The owner or operator shall keep a copy of the written lifeguard and attendant staffing plan at the pool and make it available to the department or its agent upon request, for review and approval.
ATCP 76.22(2)
(2)
Qualifications. A lifeguard shall be required to have current certifications in all of the following:
ATCP 76.22(2)(a)
(a)
Certification requirements. A copy of each certification held by lifeguard staff
shall
be
maintained
at
the
pool
and
shall
be
made
available for inspection by the
department or its agent.
P Certifications required include all of the following:
ATCP 76.22(2)(b)
(b)
Attendants. Attendants
may
staff
water
attractions,
waterslides,
or
pool slides to assist patrons, pursuant to
s. ATCP 76.23. Attendants may not be used in place of lifeguards.
ATCP 76.22(3)(a)
(a)
Identification and equipment. At all times
when
on
duty
a
lifeguard
shall have all the following:
ATCP 76.22(3)(a)1.
1. Clothing or equipment
that
is
conspicuously marked
“Lifeguard”
or
“Guard”
.
ATCP 76.22(3)(a)2.
2. A
rescue
tube
with
a
harness
as
instructed
in
national
certification
courses.
P
ATCP 76.22(3)(b)
(b)
Assigned duties. A lifeguard who is assigned to supervise a pool may not be assigned duties that may distract the lifeguard's attention from observing a patron in the pool or
that
may
hinder
the
lifeguard's
ability
to
provide immediate assistance to a
patron.
P
ATCP 76.22 History
History: CR 22-021: cr.
Register June 2023 No. 810, eff. 9-24-23;
correction in (2) (a) 1. made under s. 13.92 (4) (b) 7., Stats., Register November 2023 No. 815. ATCP 76.23
ATCP 76.23
Lifeguard and attendant placement and staffing requirements. ATCP 76.23(1)(a)1.1. Each pool having a
surface
area
of
2,000
square
feet
or
more
shall
be
staffed pursuant to ss.
ATCP 76.23 Table A, and
ATCP 76.23 Table B, when the pool
is
in
use
or
is
open
to
the
public.
If
the
requirements
in
s. ATCP 76.23 Table A or B, conflict, the pool shall comply with
the
strictest
requirements
of
s. ATCP 76.23
Table A or B.
P
ATCP 76.23(1)(a)2.
2. An
operator
may
close
a
portion
of
a
pool
to
patrons
in
order to meet
the
lifeguard staffing requirements for square footage pursuant to s.
ATCP 76.23 Table A, except that at least one lifeguard shall be provided.
P
