(B) Locating the POISONOUS OR TOXIC MATERIALS in an area that is not above FOOD, EQUIPMENT, UTENSILS, LINENS, and SINGLE-SERVICE or SINGLE-USE ARTICLES.
This paragraph does not apply to EQUIPMENT and UTENSIL cleaners and SANITIZERS that are stored in WAREWASHING areas for availability and convenience if the materials are stored to prevent contamination of FOOD, EQUIPMENT, UTENSILS, LINENS, and SINGLE-SERVICE and SINGLE-USE ARTICLES. P
-
See PDF for table 
-
See PDF for table -
See PDF for table -
See PDF for table (A) Meet the requirements specified in
40 CFR 180.940 Tolerance exemptions for active and inert ingredients for use in antimicrobial formulations (FOODCONTACT SURFACE SANITIZING solutions)
P, or
(1) Generally recognized as safe for use in FOOD as specified in
21 CFR 182 - Substances Generally Recognized as Safe, or
21 CFR 184 - Direct Food Substances Affirmed as Generally Recognized as Safe,
P
(2) Generally recognized as safe for the intended use as specified in
21 CFR 186 - Indirect Food Substances Affirmed as Generally Recognized as Safe,
P
(3) Generally recognized as safe for the intended use as determined by experts qualified in scientific training and experience to evaluate the safety of substances added, directly or indirectly, to FOOD as described in
21 CFR 170.30 Eligibility for classification as generally recognized as safe (GRAS),
P
(4) Subject of an effective Food Contact Notification as described in the Federal Food Drug and Cosmetic Act (FFDCA) Section 409(h), P
(5) APPROVED for use as a drying agent under a prior sanction as described in the Federal Food Drug and Cosmetic Act (FFDCA) § 201(s) (4);
P
(6) Specifically regulated as an indirect FOOD ADDITIVE for use as a drying agent as specified in
21 CFR Parts 174-
178,
P or
(7) APPROVED for use as a drying agent under the threshold of regulation process established by
21 CFR 170.39 Threshold of regulation for substances used in food-contact articles;
P and
(B) Stored in a kit or a container that is located to prevent the contamination of FOOD
, EQUIPMENT
, UTENSILS, and LINENS, and SINGLE-SERVICE and SINGLE-USE ARTICLES.
P
-
See PDF for table
(D) If APPROVED by the DEPARTMENT, an enclosed building as specified in ¶ (A) of this section, may not be required as a SERVICE BASE if it can be demonstrated that the lack of such a building will not interfere with the sanitary operation or servicing, cleaning, inspection and maintenance of the MOBILE FOOD ESTABLISHMENT.
-
See PDF for table -
See PDF for table -
See PDF for table -
See PDF for table
(B) The water storage tank shall be sized as specified in § 5-103.11, but no smaller than the following:
(1) A MOBILE FOOD ESTABLISHMENT that only serves BEVERAGES or prepared FOOD or reheats prepared FOODS shall have a water storage tank with a capacity of at least 38 liters (10 gallons) for FOOD EMPLOYEE handwashing;
(2) A FOOD PUSHCART shall have a water storage tank with a minimum capacity of 19 liters (5 gallons) for handwashing; or
(3) A MOBILE FOOD ESTABLISHMENT that prepares FOOD or BEVERAGES on the unit shall have a water storage tank with a capacity of at least 151 liters (40 gallons) for handwashing, UTENSIL washing and SANITIZING purposes.
(B) The PUSHCART shall provide adequate shielding to protect FOOD from contamination.
(B) When a TEMPORARY FOOD ESTABLISHMENT cannot connect to an APPROVED SEWAGE disposal system, a container for liquid waste storage shall be provided and shall be emptied when necessary to a public sewer or other location APPROVED by the DEPARTMENT or its agent.
-
See PDF for table -
See PDF for table
(A) The DEPARTMENT, on the basis of construction criteria developed by the national sanitation foundation (NSF) or the national automatic merchandising association (NAMA); or
(B) A testing laboratory APPROVED by the DEPARTMENT. Testing laboratories APPROVED by the DEPARTMENT are the national sanitation foundation (NSF) and laboratories participating in the national automatic merchandising association (NAMA) VENDING MACHINE evaluation program.
Note: DEPARTMENT approval is based upon the NSF or NAMA construction criteria. Copies of the criteria can be obtained by writing the National Sanitation Foundation, P.O. Box 130140, 789 N Dixboro Rd., Ann Arbor, Michigan 48105 or the National Automatic Merchandising Association, 20 N. Wacker Drive, suite 3500, Chicago, Illinois 60606.
-
See PDF for table -
See PDF for table -
See PDF for table -
See PDF for table -
See PDF for table
(B) Dispensing. All SINGLE-SERVICE ARTICLES with which FOOD normally comes in contact, including straws, spoons, forks, and containers, shall be furnished to the customer in the original individual wrapper, unopened, or in a sanitary SINGLESERVICE dispenser APPROVED by the DEPARTMENT.
-
See PDF for table -
See PDF for table -
See PDF for table
(B) Thermometers.
(1) A thermometer accurate to ±2°F. or 1°C. shall be provided in the VENDING MACHINE to indicate the air temperature of the warmest part of the cold FOOD storage area of the machine or the coldest part of the hot FOOD storage area of the machine, as applicable.
(2) This thermometer shall be visible to the EMPLOYEE during normal filling and servicing operations.
(C) Dispensing EQUIPMENT. VENDING MACHINE dispensing EQUIPMENT shall meet the requirements specified under 4-204.13 and 4-204.14, as applicable.
(D) Can openers. Can openers on VENDING MACHINES shall meet the requirements specified under 4-204.19.
(E) Equipment maintenance.
(1) Maintenance. VENDING MACHINES and related EQUIPMENT shall be maintained in a clean and sanitary condition and in good repair.
(2) Replacement parts. All replacement parts and tubing shall be equal to or exceed original EQUIPMENT specifications. Where clear tubing is used, it shall be replaced with clear tubing. No part built in as a function of the VENDING MACHINE may be removed or bypassed.
(3) VENDING MACHINE doors and access openings shall meet the requirements under section 4-204.123.
(B) A course shall consist of at least 3 hours of instruction time and include an examination on the information presented.
(C) A course shall cover the following subjects:
(1) Temperature control of TIME/TEMPERATURE CONTROL FOR SAFETY FOOD during preparation, storage, transportation, and service;
(2) Effective cleaning and SANITIZING of UTENSILS and EQUIPMENT;
(3) FOOD protection, including the shelf life for FOODS;
(4) FOOD worker personal hygiene;
(5) Effective handwashing techniques;
(6) Identification of TIME/TEMPERATURE CONTROL FOR SAFETY FOOD;
(7) Storage and use of toxic products;
(8) HACCP concepts and practices; and
(9) Special problems in FOOD service sanitation.
(D) The department may authorize modification of course content to address code changes and emerging FOOD safety issues.
(E) A request for APPROVAL of a recertification training course shall be submitted to the DEPARTMENT in writing along with the proposed curriculum.
(D) The DEPARTMENT may cancel its APPROVAL of a training course at any time if its investigation reveals that the criteria in this subsection are not being met.
Note: To request APPROVAL of a recertification training course, write the Department of Agriculture, Trade and Consumer Protection, Division of Food and Recreational Safety, P.O. Box 8911, Madison, WI 53708-8911, telephone 608-224-4700
