This is the preview version of the Wisconsin State Legislature site.
Please see http://docs.legis.wisconsin.gov for the production version.
CHAPTER 168
petroleum products and dangerous substances
SUBCHAPTER I
PETROLEUM PRODUCT INSPECTIONS
168.01   Definitions.
168.04   Standards.
168.05   Inspection of petroleum products.
168.06   Powers.
168.07   Inspections; requirements.
168.08   Records.
168.09   Authority to enter.
168.10   Access to records.
168.105   Dispensing gasoline-ethanol fuel blends.
168.11   Identifications.
168.12   Fees for oil inspection.
168.125   Reports; payment.
168.128   Deposit of fees.
168.13   Required records.
168.14   Misbranding.
168.15   Penalty.
168.16   Duties of department.
168.17   Attorney general and district attorney to prosecute.
SUBCHAPTER II
STORAGE OF DANGEROUS SUBSTANCES
168.21   Definitions.
168.22   Storage tanks.
168.23   Rules.
168.24   Secondary containment requirements.
168.25   Enforcement.
168.26   Penalties.
168.28   Inventory of petroleum product storage tanks.
subch. I of ch. 168 SUBCHAPTER I
PETROLEUM PRODUCT INSPECTIONS
168.01 168.01 Definitions. In this subchapter:
168.01(1) (1)“Department" means the department of agriculture, trade and consumer protection.
168.01(2) (2)“Inspector" means a duly authorized petroleum products inspector of the department.
168.01(2s) (2s)“Person" includes any individual, sole proprietorship, partnership, limited liability company, corporation, or association. A single-owner entity that is disregarded as a separate entity under ch. 71 is disregarded as a separate entity for purposes of this subchapter.
168.01(3) (3)“Petroleum products" means gasoline, gasoline-alcohol fuel blends, kerosene, fuel oil, burner oil and diesel fuel.
168.01(4) (4)“Supplier" includes a person who imports, or acquires immediately upon import, petroleum products by pipeline or marine vessel from a state, territory or possession of the United States or from a foreign country into a terminal and who is registered under 26 USC 4101 for tax-free transactions in gasoline. “Supplier" also includes a person who produces in this state; or imports into a terminal or bulk plant; or acquires immediately upon import by truck, railcar or barge into a terminal; alcohol or alcohol derivative products. “Supplier" also includes a person who produces, manufactures or refines petroleum products in this state. “Supplier" also includes a person who acquires petroleum products pursuant to an industry terminal exchange agreement or by a 2-party exchange under section 4105 of the Internal Revenue Code. “Supplier" does not include a retail dealer or wholesaler who merely blends alcohol with gasoline before the sale or distribution of the product and does not include a terminal operator who merely handles in a terminal petroleum products consigned to the terminal operator.
168.01 History History: 1971 c. 215; 1995 a. 27ss. 4473 and 9116 (5); 1997 a. 27; 2005 a. 25; 2011 a. 32; 2013 a. 20 ss. 1951 to 1953, 1955, 1957; 2015 a. 216.
168.04 168.04 Standards.
168.04(1)(1)The department by rule shall prescribe minimum product grade specifications for gasoline, automotive gasoline, gasoline-alcohol fuel blends, reformulated gasoline, as defined in s. 285.37 (1), and kerosene and may prescribe product grade specifications for aviation gasoline, fuel oils, and diesel fuels.
168.04(2) (2)
168.04(2)(a)(a) Except as provided in par. (b), the rules required under sub. (1) shall prohibit gasoline, automotive gasoline, gasoline-alcohol fuel blends, and reformulated gasoline, as defined in s. 285.37 (1), beginning on August 1, 2004, from containing more than 0.5 percent, by volume, of methyl tertiary-butyl ether.
168.04(2)(b) (b) The rules required under sub. (1) shall not prohibit racing fuel used at racing events or in preparation for racing events from containing any amount of methyl tertiary-butyl ether.
168.04(3) (3)Except as otherwise provided in this section, rules promulgated under this section shall be in conformity with nationally recognized standards, specifications, and classifications, such as those published by ASTM International, the Society of Automotive Engineers, and the U.S. Environmental Protection Agency. The department may not promulgate or enforce a rule prohibiting the placement of additional information on the dispensing device.
168.04(4) (4)
168.04(4)(a)(a) In this subsection, “gasoline-ethanol fuel blend” includes such a fuel blend for both automotive and nonautomotive uses.
168.04(4)(b) (b) Except as provided under par. (c), compliance with the requirements, established by the department by rule under sub. (1), of ASTM D4814-17 or the most current version of testing methods adopted by the department may be demonstrated by testing a gasoline-ethanol fuel blend or testing the gasoline base stock from which the gasoline-ethanol fuel blend is produced.
168.04(4)(c) (c) The department may promulgate rules that require that a gasoline-ethanol fuel blend and the gasoline base stock from which the gasoline-ethanol fuel blend is produced meet the requirements of ASTM D4814-17, or the most current version of testing methods adopted by the department. A rule promulgated under this paragraph may not take effect sooner than July 1, 2019.
168.04 Cross-reference Cross-reference: See also ch. ATCP 94, Wis. adm. code.
168.04 Annotation Legislative Council Note, 1979: Clarifies that the department of industry, labor and human relations has authority to promulgate standards for gasoline-alcohol fuel blends. The existing requirement that rules be in conformity with nationally recognized standards, including those published by the U.S. environmental protection agency, should ensure that any rules establishing standards for gasoline-alcohol fuel blends are consistent with federal rulings on those additives permitted to be mixed with unleaded gasoline. [Bill 456-A]
168.05 168.05 Inspection of petroleum products.
168.05(1)(1)No petroleum product imported into and received in this state or received from a manufacturer or refiner or from a marine or pipeline terminal within this state may be unloaded from its original container except as provided under sub. (5), sold, offered for sale or used until a true sample of not less than 8 ounces is taken as provided in this subchapter. This subsection does not apply if the department has previously inspected the petroleum product at the refinery, marine or pipeline terminal. Each person importing or receiving a petroleum product which has not been previously inspected shall notify the inspector in the person's district of the receipt thereof, and the inspector shall take a sample of the petroleum product.
168.05(2) (2)If such petroleum product is received on a regular business day between the hours of 7:45 a.m. and 4:30 p.m., such notice shall be given forthwith upon receipt of such petroleum product. If received at any other time, such notice shall be given between the next succeeding hours of 7:45 a.m. and 10 a.m. of a regular business day. Provided, that if any petroleum product is received on Saturday, Sunday, or any legal holiday, designated in s. 995.20, such notice shall be given on the next following regular business day between the hours of 7:45 a.m. and 10 a.m.
168.05(3) (3)If the inspector does not, upon proper notice, after a reasonable length of time, take such sample, the recipient of such petroleum product may, in the presence of a disinterested witness, open such original container and take a true sample of not less than 8 ounces of the contents thereof. Such sample shall be immediately placed in a clean container which is in compliance with s. 168.11 (2) and (3) and tightly closed. The recipient shall record upon a label attached to such container the means of conveyance, the type of original container, the product name and quantity of the contents thereof, and such other information as the department reasonably requires for the proper identification of such shipment. Such sample thus taken shall be held for delivery, upon demand, to the inspector. After such sample is taken such petroleum product may be unloaded, sold, offered for sale or used the same as if sampled by the inspector.
168.05(4) (4)For the purpose of this section, the following shall constitute a reasonable length of time in which an inspector shall take the sample herein required: If notice is properly given to an inspector before the hour of 11:45 a.m., the inspector shall take such sample before the hour of 4:30 p.m. of the day; if notice is properly given between the hours of 11:45 a.m. and 4:30 p.m., such sample shall be taken before the hour of 11:45 a.m. of the next following regular business day. Saturdays, Sundays, and legal holidays, designated in s. 995.20, shall not be considered regular business days.
Loading...
Loading...
This is an archival version of the Wis. Stats. database for 2021. See Are the Statutes on this Website Official?