NR 661.0004(1)(a)2.2. Any mixture of domestic sewage, as defined in subd.1., and other wastes that passes through a sewer system to a publicly owned treatment works for treatment, except as prohibited by s. NR 666.505 and Clean Water Act requirements specified in 40 CFR 403.5 (b). NR 661.0004 NoteNote: This exclusion applies only to the actual point source discharge. It does not exclude industrial wastewaters while they are being collected, stored or treated before discharge, nor does it exclude sludges that are generated by industrial wastewater treatment.
NR 661.0004 NoteNote: Title 42 USC 2011 to 2114 is also known as the atomic energy act of 1954, as amended. NR 661.0004(1)(e)(e) Materials subjected to in-situ mining techniques that are not removed from the ground as part of the extraction process. NR 661.0004(1)(f)(f) Pulping liquors that are reclaimed in a pulping liquor recovery furnace and reused in the pulping process, unless they are accumulated speculatively as defined in s. NR 661.0001 (3). NR 661.0004(1)(h)(h) Secondary materials that are reclaimed and returned to the original process or processes in which they were generated where they are reused in the production process provided all of the following conditions are met: NR 661.0004(1)(h)1.1. Only tank storage is involved, and the entire process through completion of reclamation is closed by being entirely connected with pipes or other comparable enclosed means of conveyance. NR 661.0004(1)(h)2.2. Reclamation does not involve controlled flame combustion, such as occurs in boilers, industrial furnaces, or incinerators. NR 661.0004(1)(h)3.3. The secondary material is never accumulated in the tanks for more than 12 months without being reclaimed. NR 661.0004(1)(h)4.4. The reclaimed material is not used to produce a fuel or used to produce products that are used in a manner constituting disposal. NR 661.0004(1)(i)1.1. Spent wood preserving solutions that have been reclaimed and are reused for their original intended purpose. NR 661.0004(1)(i)2.2. Wastewaters from the wood preserving process that have been reclaimed and are reused to treat wood. NR 661.0004(1)(i)3.3. Prior to reuse, the wood preserving wastewaters and spent wood preserving solutions described in subds. 1. and 2., so long as they meet all of the following conditions: NR 661.0004(1)(i)3.a.a. The wood preserving wastewaters and spent wood preserving solutions are reused on-site at waterborne plants in the production process for their original intended purpose. NR 661.0004(1)(i)3.b.b. Prior to reuse, the wastewaters and spent wood preserving solutions are managed to prevent release to either land or groundwater or both. NR 661.0004(1)(i)3.c.c. Any unit used to manage wastewaters or spent wood preserving solutions prior to reuse can be visually or otherwise determined to prevent such releases. NR 661.0004(1)(i)3.d.d. Any drip pad used to manage the wastewaters or spent wood preserving solutions prior to reuse complies with the standards in subch. W of ch. NR 665, regardless of whether the plant generates a total of less than 100 kg/month of hazardous waste. NR 661.0004(1)(i)3.e.e. Prior to operating pursuant to this exclusion, the plant owner or operator prepares a one-time notification stating that the plant intends to claim the exclusion, giving the date on which the plant intends to begin operating under the exclusion, and containing the following language: “I have read the applicable regulation establishing an exclusion for wood preserving wastewaters and spent wood preserving solutions and understand it requires me to comply at all times with the conditions set out in the regulation.” The plant shall maintain a copy of the notification in its on-site records until closure of the facility. The exclusion applies so long as the plant meets all of the conditions. If the plant goes out of compliance with any condition, it may apply to the department for reinstatement. The department may reinstate the exclusion upon finding that the plant has returned to compliance with all conditions and that the violations are not likely to recur. NR 661.0004(1)(j)(j) EPA hazardous waste numbers K060, K087, K141, K142, K143, K144, K145, K147, and K148, and any wastes from the coke by-products processes that are hazardous only because they exhibit the Toxicity Characteristic, TC, specified in s. NR 661.0024 when, subsequent to generation, these materials are recycled to coke ovens, to the tar recovery process as a feedstock to produce coal tar, or mixed with coal tar prior to the tar’s sale or refining. This exclusion is conditioned on there being no land disposal of the wastes from the point the wastes are generated to the point they are recycled to coke ovens or tar recovery or refining processes, or mixed with coal tar. NR 661.0004(1)(k)(k) Nonwastewater splash condenser dross residue from the treatment of K061 in high temperature metals recovery units, provided the residue is shipped in drums, if shipped, and not land disposed before recovery. NR 661.0004(1)(L)1.1. Oil-bearing hazardous secondary material that are generated at a petroleum refinery, SIC code 2911, and are inserted into the petroleum refining process, SIC code 2911, including distillation, catalytic cracking, fractionation, or thermal cracking units, unless the material is placed on the land, or speculatively accumulated before being recycled. Materials inserted into thermal cracking units are excluded under this subdivision, provided that the coke product also does not exhibit a characteristic of hazardous waste. Oil-bearing hazardous secondary material may be inserted into the same petroleum refinery where they are generated, or sent directly to another petroleum refinery and still be excluded under this provision. Except as provided in subd. 2., oil-bearing hazardous secondary materials generated elsewhere in the petroleum industry are not excluded under this subdivision. Residuals generated from processing or recycling materials excluded under this subdivision, where such materials as generated would have otherwise met a listing under subch. D, are designated as F037 listed wastes when disposed or intended for disposal. NR 661.0004(1)(L)2.2. Recovered oil that is recycled in the same manner and with the same conditions as described in subd. 1. Recovered oil is oil that has been reclaimed from secondary material, including wastewater, generated from normal petroleum industry practices, including refining, exploration and production, bulk storage, and transportation incident to those practices, SIC codes 1311, 1321, 1381, 1382, 1389, 2911, 4612, 4613, 4922, 4923, 4789, 5171, and 5172. Recovered oil does not include oil-bearing hazardous wastes listed in subch. D; however, oil recovered from such wastes may be considered recovered oil. “Recovered oil” does not include used oil as defined in s. NR 679.01. NR 661.0004(1)(m)(m) Excluded scrap metal, which is processed scrap metal, unprocessed home scrap metal, and unprocessed prompt scrap metal being recycled. NR 661.0004(1)(n)(n) Shredded circuit boards being recycled provided they are all of the following: NR 661.0004(1)(n)1.1. Stored in containers sufficient to prevent a release to the environment prior to recovery. NR 661.0004(1)(n)2.2. Free of mercury switches, mercury relays and nickel-cadmium batteries and lithium batteries. NR 661.0004(1)(o)(o) Condensates derived from the overhead gases from kraft mill steam strippers that are used to comply with s. NR 464.06 (5). The exemption applies only to combustion at the mill generating the condensates. NR 661.0004(1)(q)(q) Spent materials as defined in s. NR 661.0001 (3) (a), other than hazardous wastes listed in subch. D, generated within the primary mineral processing industry from which minerals, acids, cyanide, water, or other values are recovered by mineral processing or by beneficiation, if all of the following are met: NR 661.0004(1)(q)1.1. The spent material is legitimately recycled to recover minerals, acids, cyanide, water, or other values. NR 661.0004(1)(q)3.3. Except as provided in subd. 4, the spent material is stored in tanks, containers, or buildings meeting the following minimum integrity standards: a building shall be an engineered structure with a floor, walls, and a roof all of which are made of non-earthen materials providing structural support, except smelter buildings may have partially earthen floors provided the secondary material is stored on the non-earthen portion, and have a roof suitable for diverting rainwater away from the foundation; a tank shall be free standing, not be a surface impoundment as defined in s. NR 660.10 (115), and shall be manufactured of a material suitable for containment of its contents; a container shall be free standing and be manufactured of a material suitable for containment of its contents. If tanks or containers contain any particulate that may be subject to wind dispersal, the owner or operator shall operate these units in a manner that controls fugitive dust. Tanks, containers, and buildings shall be designed, constructed and operated to prevent significant releases to the environment of these materials. NR 661.0004(1)(q)4.4. The department may make a site-specific determination, after public review and comment, that only solid mineral processing spent material may be placed on pads rather than tanks containers, or buildings. Solid mineral processing spent materials may not contain any free liquid. The department shall affirm that pads are designed, constructed and operated to prevent significant releases of the secondary material into the environment. Pads shall provide the same degree of containment as tanks, containers, and buildings that meet the design, construction, and operating requirements in subd. 3. NR 661.0004(1)(q)4.a.a. The department shall also consider if storage on pads poses the potential for significant releases via groundwater, surface water, and air exposure pathways. Factors to be considered for assessing the groundwater, surface water, and air exposure pathways are: the volume and physical and chemical properties of the secondary material, including its potential for migration off the pad; the potential for human or environmental exposure to hazardous constituents migrating from the pad via each exposure pathway; and the possibility and extent of harm to human and environmental receptors via each exposure pathway. NR 661.0004(1)(q)4.b.b. Pads shall meet the following minimum standards: be designed of non-earthen material that is compatible with the chemical nature of the mineral processing spent material, capable of withstanding physical stresses associated with placement and removal; have run-on and runoff controls; be operated in a manner which controls fugitive dust; and have integrity assurance through inspections and maintenance programs. NR 661.0004(1)(q)4.c.c. Before making a determination under this subdivision, the department shall provide notice and the opportunity for comment to all persons potentially interested in the determination. This may be accomplished by placing notice of this action in major local newspapers or broadcasting notice over local radio stations. NR 661.0004(1)(q)5.5. The owner or operator provides notice to the department providing the following information: the types of materials to be recycled; the type and location of the storage units and recycling processes; and the annual quantities expected to be placed in land-based units. This notification shall be updated when there is a change in the type of materials recycled or the location of the recycling process. NR 661.0004(1)(q)6.6. For the purposes specified in sub. (2) (g), mineral processing spent materials shall be the result of mineral processing and may not include any listed hazardous wastes. Listed hazardous wastes and characteristic hazardous wastes generated by non-mineral processing industries are not eligible for the conditional exclusion from the definition of solid waste. NR 661.0004(1)(r)(r) Petrochemical recovered oil from an associated organic chemical manufacturing facility, where the oil is to be inserted into the petroleum refining process, SIC code 2911, along with normal petroleum refinery process streams, if all of the following are met: NR 661.0004(1)(r)1.1. The oil is hazardous only because it exhibits the characteristic of ignitability, D001, as defined in s. NR 661.0021 or exhibits the characteristic toxicity of benzene, D018, as defined in s. NR 661.0024. NR 661.0004(1)(r)2.2. The oil generated by the organic chemical manufacturing facility is not placed on the land or speculatively accumulated before being recycled into the petroleum refining process. An “associated organic chemical manufacturing facility” is a facility where the primary SIC code is 2869, but where operations may also include SIC codes 2821, 2822, and 2865; and is physically co-located with a petroleum refinery; and where the petroleum refinery to which the oil being recycled is returned also provides hydrocarbon feedstocks to the organic chemical manufacturing facility. “Petrochemical recovered oil” means oil that has been reclaimed from secondary material, such as sludges, byproducts, or spent materials, including wastewater, from normal organic chemical manufacturing operations, as well as oil recovered from organic chemical manufacturing processes. NR 661.0004(1)(s)(s) Spent caustic solutions from petroleum refining liquid treating processes used as a feedstock to produce cresylic or naphthenic acid, unless the material is placed on the land or accumulated speculatively as defined in s. NR 661.0001 (3). NR 661.0004(1)(t)(t) Hazardous secondary material used to make zinc fertilizers, provided that all of the following conditions are met: NR 661.0004(1)(t)2.2. Generators and intermediate handlers of zinc-bearing hazardous secondary material that are to be incorporated into zinc fertilizers shall do all of the following: NR 661.0004(1)(t)2.a.a. Submit a one-time notice to the department that contains the name, address and EPA identification number of the generator or intermediate handler facility, provides a brief description of the secondary material that will be subject to the exclusion, and identifies when the manufacturer intends to begin managing excluded, zinc-bearing hazardous secondary material under the conditions specified in this paragraph. NR 661.0004(1)(t)2.b.b. Store the excluded secondary material in tanks, containers, or buildings that are constructed and maintained in a way that prevents releases of the secondary material into the environment. At a minimum, any building used for that purpose shall be an engineered structure made of non-earthen materials that provide structural support, and shall have a floor, walls and a roof that prevent wind dispersal and contact with rainwater. Tanks used for that purpose shall be structurally sound and, if outdoors, shall have roofs or covers that prevent contact with wind and rain. Containers used for that purpose shall be kept closed except when it is necessary to add or remove material, and shall be in sound condition. Containers that are stored outdoors shall be managed within storage areas that have containment structures or systems sufficiently impervious to contain leaks, spills and accumulated precipitation; provide for effective drainage and removal of leaks, spills and accumulated precipitation; and prevent run-on into the containment system. NR 661.0004(1)(t)2.c.c. With each off-site shipment of excluded hazardous secondary material, provide written notice to the receiving facility that the material is subject to the conditions of this paragraph. NR 661.0004(1)(t)2.d.d. Maintain at the generator’s or intermediate handlers’ facility for no less than 3 years records of all shipments of excluded hazardous secondary material. For each shipment those records shall at a minimum contain the name of the transporter and date of the shipment; the name and address of the facility that received the excluded material, and documentation confirming receipt of the shipment; and the type and quantity of excluded secondary material in each shipment. NR 661.0004(1)(t)3.3. Manufacturers of zinc fertilizers or zinc fertilizer ingredients made from excluded hazardous secondary material shall do all of the following: NR 661.0004(1)(t)3.a.a. Store excluded hazardous secondary material in accordance with the storage requirements for generators and intermediate handlers, as specified in subd. 2. b. NR 661.0004(1)(t)3.b.b. Submit a one-time notification to the department that, at a minimum, specifies the name, address and EPA identification number of the manufacturing facility and identifies when the manufacturer intends to begin managing excluded, zinc-bearing hazardous secondary material under the conditions specified in this paragraph. NR 661.0004(1)(t)3.c.c. Maintain for a minimum of 3 years records of all shipments of excluded hazardous secondary material received by the manufacturer, which shall at a minimum identify for each shipment the name and address of the generating facility, name of transporter and date the materials were received, the quantity received, and a brief description of the industrial process that generated the material. NR 661.0004(1)(t)3.d.d. Submit to the department an annual report that identifies the total quantities of all excluded hazardous secondary material that were used to manufacture zinc fertilizers or zinc fertilizer ingredients in the previous year, the name and address of each generating facility, and the industrial process from which they were generated. NR 661.0004(1)(t)4.4. Nothing in this section preempts, overrides or otherwise negates the provision specified in s. NR 662.011, which requires any person who generates a solid waste to determine if that waste is a hazardous waste. NR 661.0004(1)(t)5.5. Licensed storage units that have been used to store only zinc-bearing hazardous wastes prior to the submission of the one-time notice described in subd. 2. a., and that afterward will be used only to store hazardous secondary material excluded under this paragraph, are not subject to the closure requirements under chs. NR 664 and 665. NR 661.0004(1)(u)(u) Zinc fertilizers made from hazardous wastes, or hazardous secondary material that are excluded under par. (t), provided that all of the following are met: NR 661.0004(1)(u)1.b.b. For dioxin contaminants the fertilizer shall contain no more than 8 parts per trillion of dioxin, measured as toxic equivalent or TEQ. NR 661.0004(1)(u)2.2. The manufacturer performs sampling and analysis of the fertilizer product to determine compliance with the contaminant limits for metals no less than every 6 months, and for dioxins no less than every 12 months. Testing shall also be performed whenever changes occur to manufacturing processes or ingredients that could significantly affect the amounts of contaminants in the fertilizer product. The manufacturer may use any reliable analytical method to demonstrate that no constituent of concern is present in the product at concentrations above the applicable limits. It is the responsibility of the manufacturer to ensure that the sampling and analysis are unbiased, precise, and representative of the product introduced into commerce. NR 661.0004(1)(u)3.3. The manufacturer maintains for no less than 3 years records of all sampling and analyses performed for the purposes of determining compliance with the requirements specified in subd. 2. The records shall at a minimum include all of the following: NR 661.0004(1)(u)3.a.a. The dates and times product samples were taken, and the dates the samples were analyzed. NR 661.0004(1)(u)3.d.d. The name and address of the laboratory facility at which analyses of the samples were performed. NR 661.0004(1)(u)3.e.e. A description of the analytical methods used, including any cleanup and sample preparation methods. NR 661.0004(1)(u)3.f.f. All laboratory analytical results used to determine compliance with the contaminant limits specified in this paragraph. NR 661.0004(1)(v)1.1. Used, intact CRTs are not solid wastes unless they are disposed of, or unless they are speculatively accumulated as defined in s. NR 661.0001 (3) (h) by CRT collectors or glass processors. NR 661.0004(1)(v)2.2. Used, intact CRTs are not solid wastes when exported for recycling provided that they meet the requirements specified in s. NR 661.0040. NR 661.0004(1)(w)(w) Hazardous secondary material generated and legitimately reclaimed and under the control of the generator, provided that the material complies with all the following: NR 661.0004(1)(w)1.a.a. The hazardous secondary material is generated and reclaimed at the generating facility. For the purposes of subd. 1. a. “generating facility” means all contiguous property owned, leased, or otherwise controlled by the hazardous secondary material generator. NR 661.0004(1)(w)1.b.b. The hazardous secondary material is generated and reclaimed at different facilities, if the reclaiming facility is controlled by the generator or if both the generating facility and the reclaiming facility are controlled by a person as defined in s. NR 660.10 (90), and if the generator provides one of the following certifications: “on behalf of [insert generator facility name], I certify that this facility will send the indicated hazardous secondary material to [insert reclaimer facility name], which is controlled by [insert generator facility name] and that [insert name of either facility] has acknowledged full responsibility for the safe management of the hazardous secondary material,” or “on behalf of [insert generator facility name], I certify that this facility will send the indicated hazardous secondary material to [insert reclaimer facility name], that both facilities are under common control, and that [insert name of either facility] has acknowledged full responsibility for the safe management of the hazardous secondary material.” For the purposes of this subd. 1. b. “control” means the power to direct the policies of the facility, whether by the ownership of stock, voting rights, or otherwise, except that contractors who operate facilities on behalf of a different person as defined in s. NR 660.10 (90) may not be deemed to “control” such facilities. The generating and receiving facilities shall both maintain at their facilities, for no less than 3 years, records of hazardous secondary material sent or received under this exclusion. In both cases, the records shall contain the name of the transporter, the date of the shipment, and the type and quantity of the hazardous secondary material shipped or received under the exclusion. These requirements may be satisfied by routine business records, such as financial records, bills of lading, copies of DOT shipping papers, or electronic confirmations. NR 661.0004(1)(w)1.c.c. The hazardous secondary material is generated pursuant to a written contract between a tolling contractor and a toll manufacturer and is reclaimed by the tolling contractor, if the tolling contractor certifies the following: “On behalf of [insert tolling contractor name], I certify that [insert tolling contractor name] has a written contract with [insert toll manufacturer name] to manufacture [insert name of product or intermediate] which is made from specified unused materials, and that [insert tolling contractor name] will reclaim the hazardous secondary material generated during this manufacture. On behalf of [insert tolling contractor name], I also certify that [insert tolling contractor name] retains ownership of, and responsibility for, the hazardous secondary material that are generated during the course of the manufacture, including any releases of hazardous secondary material that occur during the manufacturing process.” The tolling contractor shall maintain at its facility, for no less than 3 years, records of hazardous secondary material received pursuant to its written contract with the tolling manufacturer, and the tolling manufacturer shall maintain at its facility, for no less than 3 years, records of hazardous secondary material shipped pursuant to its written contract with the tolling contractor. In both cases, the records shall contain the name of the transporter, the date of the shipment, and the type and quantity of the hazardous secondary material shipped or received pursuant to the written contract. These requirements may be satisfied by routine business records, such as financial records, bills of lading, copies of DOT shipping papers, or electronic confirmations. For the purposes of subd. 1. b., “tolling contractor” means a person who arranges for the production of a product or intermediate made from specified unused materials through a written contract with a toll manufacturer, and “toll manufacturer” means a person who produces a product or intermediate made from specified unused materials pursuant to a written contract with a tolling contractor. NR 661.0004(1)(w)2.2. The hazardous secondary material generator satisfies all of the following conditions: NR 661.0004(1)(w)2.a.a. The hazardous secondary material is contained, as defined in s. NR 660.10 (13m). A hazardous secondary material released to the environment is discarded and a solid waste unless it is immediately recovered for the purpose of reclamation. Hazardous secondary material managed in a unit with leaks or other continuing or intermittent unpermitted releases is discarded and a solid waste. NR 661.0004(1)(w)2.d.d. The material is not otherwise subject to material-specific management conditions under sub. (1) when reclaimed, and it is not a spent lead-acid battery under ss. NR 666.080 and 673.02. NR 661.0004(1)(w)2.e.e. Persons performing the recycling of hazardous secondary material under this exclusion shall maintain documentation of their legitimacy determination on-site. Documentation shall be a written description of how the recycling meets all 3 factors specified in s. NR 660.43 (1) and how the factor in s. NR 660.43 (2) was considered. Documentation shall be maintained for 3 years after the recycling operation has ceased.
/exec_review/admin_code/nr/600/661
true
administrativecode
/exec_review/admin_code/nr/600/661/a/0004/1/n
Department of Natural Resources (NR)
Chs. NR 600-699; Environmental Protection – Hazardous Waste Management
administrativecode/NR 661.0004(1)(n)
administrativecode/NR 661.0004(1)(n)
section
true
