NR 660.10(45)(45) “Federal, state and local approvals or licenses necessary to begin physical construction” means licenses and approvals required under federal, state or local hazardous waste control statutes, regulations, rules or ordinances. NR 660.10(46)(46) “Final closure” means the closure of all hazardous waste management units at the facility according to all applicable closure requirements so that hazardous waste management activities under chs. NR 664 and 665 are no longer conducted at the facility unless subject to the provisions in ss. NR 662.015 and 662.017. NR 660.10(47)(47) “Food chain crops” means tobacco, crops grown for human consumption and crops grown for feed for animals whose products are consumed by humans. NR 660.10(48)(48) “Free liquids” means liquids which readily separate from the solid portion of a waste under ambient temperature and pressure. NR 660.10(49)(49) “Freeboard” means the vertical distance between the top of a tank or surface impoundment dike, and the surface of the waste contained therein. NR 660.10(50)(50) “Generator” means any person, by site, whose act or process produces hazardous waste identified or listed in ch. NR 661 or whose act first causes a hazardous waste to become subject to regulation. NR 660.10(50m)(50m) “Generating facility” as used in s. NR 660.10 (51t) means all contiguous property owned, leased, or otherwise controlled by the hazardous secondary material generator. NR 660.10(51)(51) “Ground water” means water below the land surface in a zone of saturation. NR 660.10(51m)(51m) “Hazardous secondary material” means a secondary material, such as spent material, by-product, or sludge, that, when discarded, would be identified as a hazardous waste, as defined in sub. (52). NR 660.10(51t)(51t) “Hazardous secondary material generator” means any person whose act or process produces hazardous secondary material at the generating facility. In this subsection, “generating facility” means all contiguous property owned, leased, or otherwise controlled by the hazardous secondary material generator. For the purposes of ss. NR 661.0002 (1) (b) 2. and 661.0004 (1) (w), a facility that collects hazardous secondary material from other persons is not the hazardous secondary material generator. NR 660.10(53)(53) “Hazardous waste constituent” means a constituent that caused the department to list the hazardous waste in subch. D of ch. NR 661, or a constituent listed in table 1 of s. NR 661.0024. NR 660.10(54)(54) “Hazardous waste management unit” is a contiguous area of land on or in which hazardous waste is placed, or the largest area in which there is significant likelihood of mixing hazardous waste constituents in the same area. Examples of hazardous waste management units include a surface impoundment, a waste pile, a land treatment area, a landfill cell, an incinerator, a tank and its associated piping and underlying containment system and a container storage area. A container alone does not constitute a unit; the unit includes containers and the land or pad upon which they are placed. NR 660.10(55)(55) “In operation” refers to a facility which is treating, storing or disposing of hazardous waste. NR 660.10(56)(56) “Inactive portion” means that portion of a facility which is not operated after August 1, 2006. NR 660.10 NoteNote: See also “active portion” and “closed portion.”
NR 660.10(57)(57) “Incinerator” means any enclosed device that is one of the following: NR 660.10(57)(a)(a) Uses controlled flame combustion and neither meets the criteria for classification as a boiler, sludge dryer or carbon regeneration unit, nor is listed as an industrial furnace. NR 660.10(57)(b)(b) Meets the definition of infrared incinerator or plasma arc incinerator. NR 660.10(58)(58) “Incompatible waste” means a hazardous waste which is unsuitable for one of the following: NR 660.10(58)(a)(a) Placement in a particular device or facility because it may cause corrosion or decay of containment materials (e.g., container inner liners or tank walls). NR 660.10(58)(b)(b) Commingling with another waste or material under uncontrolled conditions because the commingling might produce heat or pressure, fire or explosion, violent reaction, toxic dusts, mists, fumes, or gases, or flammable fumes or gases. NR 660.10(59)(59) “Individual generation site” means the contiguous site at or on which one or more hazardous wastes are generated. An individual generation site, such as a large manufacturing plant, may have one or more sources of hazardous waste but is considered a single or individual generation site if the site or property is contiguous. NR 660.10(60)(60) “Industrial furnace” means any of the following enclosed devices that are integral components of manufacturing processes and that use thermal treatment to accomplish recovery of materials or energy: NR 660.10(60)(g)(g) Smelting, melting and refining furnaces (including pyrometallurgical devices such as cupolas, reverberator furnaces, sintering machines, roasters and foundry furnaces). NR 660.10(60)(k)(k) Combustion devices used in the recovery of sulfur values from spent sulfuric acid. NR 660.10(60)(L)(L) Halogen acid furnaces (HAFs) for the production of acid from halogenated hazardous waste generated by chemical production facilities where the furnace is located on the site of a chemical production facility, the acid product has a halogen acid content of at least 3%, the acid product is used in a manufacturing process, and, except for hazardous waste burned as fuel, hazardous waste fed to the furnace has a minimum halogen content of 20% as-generated. NR 660.10(60)(m)(m) Such other devices as the department may, after notice and comment, add to this list on the basis of one or more of the following factors: NR 660.10(60)(m)1.1. The design and use of the device primarily to accomplish recovery of material products. NR 660.10(60)(m)2.2. The use of the device to burn or reduce raw materials to make a material product. NR 660.10(60)(m)3.3. The use of the device to burn or reduce secondary materials as effective substitutes for raw materials, in processes using raw materials as principal feedstocks. NR 660.10(60)(m)4.4. The use of the device to burn or reduce secondary materials as ingredients in an industrial process to make a material product. NR 660.10(60)(m)5.5. The use of the device in common industrial practice to produce a material product. NR 660.10(61)(61) “Infrared incinerator” means any enclosed device that uses electric powered resistance heaters as a source of radiant heat followed by an afterburner using controlled flame combustion and which is not listed as an industrial furnace. NR 660.10(62)(62) “Inground tank” means a device meeting the definition of “tank” in this section whereby a portion of the tank wall is situated to any degree within the ground, thereby preventing visual inspection of that external surface area of the tank that is in the ground. NR 660.10(63)(63) “Injection well” means a well into which fluids are injected. NR 660.10 NoteNote: See also “underground injection.”
NR 660.10(64)(64) “Inner liner” means a continuous layer of material placed inside a tank or container which protects the construction materials of the tank or container from the contained waste or reagents used to treat the waste. NR 660.10(65)(65) “Installation inspector” means a person who, by reason of that person’s knowledge of the physical sciences and the principles of engineering, acquired by a professional education and related practical experience, is qualified to supervise the installation of tank systems. NR 660.10(65m)(65m) “Intermediate facility” means a facility that stores hazardous secondary material for more than 10 days, other than a hazardous secondary material generator or reclaimer of such material. NR 660.10(66)(66) “International shipment” means the transportation of hazardous waste into or out of the jurisdiction of the United States. NR 660.10(67)(67) “Lamp”, also referred to as “universal waste lamp,” is defined as the bulb or tube portion of an electric lighting device. A lamp is specifically designed to produce radiant energy, most often in the ultraviolet, visible and infra-red regions of the electromagnetic spectrum. Examples of common universal waste electric lamps include, but are not limited to, fluorescent, high intensity discharge, neon, mercury vapor, high pressure sodium and metal halide lamps. NR 660.10(67m)(67m) “Land-based unit” means an area where hazardous secondary material are placed in or on the land before recycling. This definition does not include land-based production units. NR 660.10(68)(68) “Landfill” means a disposal facility or part of a facility where hazardous waste is placed in or on land and which is not a pile, a land treatment facility, a surface impoundment, an underground injection well, a salt dome formation, a salt bed formation, an underground mine, a cave or a corrective action management unit. NR 660.10(69)(69) “Landfill cell” means a discrete volume of a hazardous waste landfill which uses a liner to provide isolation of wastes from adjacent cells or wastes. Examples of landfill cells are trenches and pits. NR 660.10(70)(70) “Land treatment facility” means a facility or part of a facility at which hazardous waste is applied onto or incorporated into the soil surface; such facilities are disposal facilities if the waste will remain after closure. NR 660.10(70m)(70m) “Large quantity generator” means a generator that generates any of the following amounts in a calendar month: NR 660.10(70m)(a)(a) Greater than or equal to 1,000 kilograms of non-acute hazardous waste. NR 660.10(70m)(c)(c) Greater than 100 kilograms of any residue or contaminated soil, water, or other debris resulting from the cleanup of a spill, into or on any land or water, of any acute hazardous waste listed in s. NR 661.0031 or 661.0033 (5). NR 660.10(71)(71) “Leachate” means any liquid, including any suspended components in the liquid, that has percolated through or drained from hazardous waste. NR 660.10(72)(72) “Leak detection system” means a system capable of detecting the failure of either the primary or secondary containment structure or the presence of a release of hazardous waste or accumulated liquid in the secondary containment structure. Such a system shall employ operational controls (e.g., daily visual inspections for releases into the secondary containment system of aboveground tanks) or consist of an interstitial monitoring device designed to detect continuously and automatically the failure of the primary or secondary containment structure or the presence of a release of hazardous waste into the secondary containment structure. NR 660.10(73)(73) “Liner” means a continuous layer of natural or human-made materials, beneath or on the sides of a waste pile, surface impoundment, landfill or landfill cell, which restricts the downward or lateral escape of hazardous waste, hazardous waste constituents or leachate. NR 660.10(75)(75) “Management” or “hazardous waste management” means the systematic control of the collection, source separation, storage, transportation, processing, treatment, recovery and disposal of hazardous waste. NR 660.10(76)(76) “Manifest” has the meaning given in s. 291.01 (11), Stats. “Manifest” also means the shipping document EPA Form 8700–22 and, if necessary, EPA form 8700-22A, or the electronic manifest, originated and signed by the generator or offeror according to the instructions in the appendix to 40 CFR part 262 and the applicable requirements of chs. NR 662 to 665. NR 660.10(77)(77) “Manifest tracking number” means the alphanumeric identification number, a unique 3 letter suffix preceded by 9 numerical digits, which is pre-printed in Item 4 of the manifest by a registered source. NR 660.10(77m)(77m) “Mercury-containing equipment” means a device or part of a device (including thermostats, but excluding batteries and lamps) that contains elemental mercury integral to its function. NR 660.10(78)(78) “Military munitions” means all ammunition products and components produced or used by or for the U.S. department of defense or the U.S. armed services for national defense and security, including military munitions under the control of the department of defense, the U.S. coast guard, the U.S. department of energy (DOE) and national guard personnel. The term military munitions includes: confined gaseous, liquid and solid propellants, explosives, pyrotechnics, chemical and riot control agents, smokes and incendiaries used by DOD components, including bulk explosives and chemical warfare agents, chemical munitions, rockets, guided and ballistic missiles, bombs, warheads, mortar rounds, artillery ammunition, small arms ammunition, grenades, mines, torpedoes, depth charges, cluster munitions and dispensers, demolition charges and devices and components thereof. Military munitions do not include wholly inert items, improvised explosive devices and nuclear weapons, nuclear devices and nuclear components thereof. However, the term does include non-nuclear components of nuclear devices, managed under DOE’s nuclear weapons program after all required sanitization operations under the atomic energy act of 1954 (42 USC parts 2011 to 2114), as amended, have been completed. NR 660.10(79)(79) “Mining overburden returned to the mine site” means any material overlying an economic mineral deposit which is removed to gain access to that deposit and is then used for reclamation of a surface mine. NR 660.10(80)(80) “Miscellaneous unit” means a hazardous waste management unit where hazardous waste is treated, stored or disposed of and that is not a container, tank, surface impoundment, pile, land treatment unit, landfill, incinerator, boiler, industrial furnace, underground injection well, containment building, corrective action management unit, unit eligible for a research, development and demonstration license under s. NR 670.065, or staging pile. NR 660.10(81)(81) “Movement” means that hazardous waste transported to a facility in an individual vehicle. NR 660.10(82)(82) “New hazardous waste management facility” or “new facility” means a facility that began operation, or for which construction commenced, after November, 19, 1980. NR 660.10(83)(83) “New tank system” or “new tank component” means a tank system or component that will be used for the storage or treatment of hazardous waste and for which installation has commenced after March 1, 1991; except, however, for purposes of ss. NR 664.0193 (7) (b) and 665.0193 (7) (b), a new tank system is one for which construction commences after July 14, 1986. NR 660.10 NoteNote: See also “existing tank system.”
NR 660.10(83m)(83m) “No free liquids,” as used in s. NR 661.0004 (1) (z) and (2) (r), means that solvent-contaminated wipes may not contain free liquids as determined by Method 9095B Paint Filter Liquids Test in “Test Methods for Evaluating Solid Waste, Physical/Chemical Methods,” EPA SW–846, incorporated by reference in s. NR 660.11, and that there is no free liquid in the container holding the wipes. “No free liquids” may also be determined using another standard or test method as defined by the department. NR 660.10(83t)(83t) “Non-acute hazardous waste” means all hazardous wastes that are not acute hazardous waste. NR 660.10(84)(84) “On ground tank” means a device meeting the definition of “tank” in this section and that is situated in such a way that the bottom of the tank is on the same level as the adjacent surrounding surface so that the external tank bottom cannot be visually inspected. NR 660.10(85)(85) “On-site” means the same or geographically contiguous property which may be divided by public or private right-of-way, provided the entrance and exit between the properties is at a cross-roads intersection, and access is by crossing as opposed to going along, the right-of-way. Non-contiguous properties owned by the same person but connected by a right-of-way which the owner controls and to which the public does not have access, is also considered on-site property. NR 660.10(86)(86) “Open burning” means the combustion of any material without any of the following characteristics: NR 660.10(86)(a)(a) Control of combustion air to maintain adequate temperature for efficient combustion. NR 660.10(86)(b)(b) Containment of the combustion-reaction in an enclosed device to provide sufficient residence time and mixing for complete combustion. NR 660.10 NoteNote: See also “incineration” and “thermal treatment.”
NR 660.10(87)(87) “Operator” means the person responsible for the overall operation of a facility. NR 660.10(88)(88) “Owner” means the person who owns a facility or part of a facility. NR 660.10(89)(89) “Partial closure” means the closure of a hazardous waste management unit according to the applicable closure requirements of chs. NR 664 and 665 at a facility that contains other active hazardous waste management units. For example, partial closure may include the closure of a tank (including its associated piping and underlying containment systems), landfill cell, surface impoundment, waste pile or other hazardous waste management unit, while other units of the same facility continue to operate. NR 660.10(90)(90) “Person” means an individual, trust, firm, joint stock company, limited liability company, federal agency, corporation (including a government corporation), partnership, association, state, municipality, commission, political subdivision of a state or any interstate body.
/exec_review/admin_code/nr/600/660
true
administrativecode
/exec_review/admin_code/nr/600/660/b/10/60/e
Department of Natural Resources (NR)
Chs. NR 600-699; Environmental Protection – Hazardous Waste Management
administrativecode/NR 660.10(60)(e)
administrativecode/NR 660.10(60)(e)
section
true
