NR 422.084(1)(a)1.1. An area that is classified as a moderate, serious, severe, or extreme ozone nonattainment area. NR 422.084(1)(a)2.a.a. The area had been classified as a moderate, serious, severe, or extreme ozone nonattainment area for a National Ambient Air Quality Standard, as defined in s. NR 489.02 (21), for ozone promulgated in or after 2008. NR 422.084(1)(a)2.b.b. The area was subsequently reclassified as a marginal ozone nonattainment area or redesignated to an attainment area for ozone. NR 422.084(1)(b)(b) The facility has actual VOC emissions, before consideration of controls, from all miscellaneous metal parts and products coating operations, plastic parts coating operations, and related cleaning activities equal to or greater than 2.7 tons per year based on any consecutive 12-month period. NR 422.084(2)(2) Definitions. Notwithstanding the definitions contained in s. NR 422.02, the following definitions apply in this section: NR 422.084(2)(a)(a) “Electromagnetic interference/radio frequency interference shielding coating” means a coating used on electrical or electronic equipment to provide shielding against electromagnetic interference, radio frequency interference, or static discharge. NR 422.084(2)(b)(b) “Mask coating” means a thin film coating applied through a template to coat a small portion of a substrate. NR 422.084(2)(c)(c) “Pretreatment wash primer” means a coating that contains no more than 12 percent solids, by weight, and at least 0.50 percent acid, by weight, as measured according to ASTM D1613-02, incorporated by reference under s. NR 484.10 (25m), and that is used to provide surface etching, corrosion resistance, and adhesion of subsequent coatings. NR 422.084(2)(d)(d) “Stencil coating” means an ink or a pigmented coating that is rolled or brushed onto a template or stamp in order to add identifying letters, symbols, or numbers. NR 422.084(2)(e)(e) “Texture coating” means a coating applied to a plastic part that, in its finished form, consists of discrete raised spots of the coating. NR 422.084(3)(a)(a) The following activities, materials, and coating lines are exempt from this section: NR 422.084(3)(a)5.5. Coatings that are applied to test panels and coupons as part of research and development, quality control, or performance testing activities at paint research or manufacturing facilities. NR 422.084(3)(b)(b) Plastic part coating operations using any of the following types of coatings are exempt from the VOC content limitations specified under sub. (4): NR 422.084(3)(b)3.3. Clear coats or translucent coatings, except for clear coats or translucent coatings applied to automotive and transportation parts. NR 422.084(3)(b)4.4. Coatings applied at a paint manufacturing facility while conducting performance tests on the coatings. NR 422.084(3)(b)5.5. Any individual coating category used in volumes less than 50 gallons in any one year, if substitute compliant coatings are not available, provided that the total usage of all such coatings does not exceed 200 gallons per year, per facility. NR 422.084(3)(b)7.7. Mask coatings that are less than 0.5 millimeter thick when dried and the area coated is less than 25 square inches. NR 422.084(3)(b)8.8. Electromagnetic interference/radio frequency interference shielding coatings. NR 422.084(3)(b)9.9. Heparin-benzalkonium chloride containing coatings applied to medical devices, provided that the total usage of all such coatings does not exceed 100 gallons per year, per plastic parts coating operation. NR 422.084(3)(c)(c) All of the following types of coatings for automotive, transportation, or business machines are exempt from the VOC content limitations specified under sub. (4): NR 422.084(3)(d)(d) All of the following types of coating operations are exempt from the coating application method requirements specified under sub. (5): NR 422.084(4)(a)(a) Except as specified under par. (b), the owner or operator of a plastic parts coating operation located at an affected facility under this section shall use the low-VOC coatings that meet the VOC content limits in Table 1C for the affected plastic parts coating operations. If more than one VOC content limit applies to a specific coating, the most stringent VOC content limit shall be applied. Table 1C
VOC Content Limitations for Coatings Used in Plastic Parts Coating – Low VOC Coatings
[kilogram/liter (pounds/gallons) of coating, excluding water and exempt compounds listed in s. NR 400.02 (162) (a), as applied] NR 422.084 NoteNote: The VOC content limits for the coating and application types under Table 1C rows 1. a. to k. apply to any coating that does not meet the definitions for the specific coatings listed under Table 1C rows 2. a. to 5. h.
NR 422.084(4)(b)(b) If the low-VOC coatings that meet the VOC content limits required under par. (a) are not used at an affected facility, the owner or operator shall use add-on control equipment that achieves a minimum overall emission reduction efficiency of 90 percent for VOC. NR 422.084(5)(5) Application methods. An owner or operator of an affected facility under this section, except for a facility that uses add-on control equipment as described under sub. (4) (b), shall use one or a combination of the following application methods for the affected coating operations: NR 422.084(5)(h)(h) Other coating application methods that are capable of achieving a transfer efficiency equivalent to or better than achieved by high-volume, low-pressure spraying and are approved by the department in writing. NR 422.084(6)(6) Add-on control equipment requirements. An owner or operator that uses add-on control equipment as described under sub. (4) (b) shall comply with the applicable monitoring, testing, and recordkeeping requirements specified under ss. NR 439.04 (5) (e), 439.055, and 439.075. NR 422.084(7)(7) Work practices for coating-related activities. The owner or operator of an affected facility under this section shall do all of the following for coating-related activities: NR 422.084(7)(a)(a) Store all VOC-containing coatings, thinners, and coating-related waste materials in closed containers. NR 422.084(7)(b)(b) Ensure that mixing and storage containers used for VOC-containing coatings, thinners, and coating-related waste materials are kept closed at all times, except when depositing or removing those materials. NR 422.084(7)(c)(c) Minimize spills of VOC-containing coatings, thinners, and coating-related waste materials. NR 422.084(7)(d)(d) Convey VOC-containing coatings, thinners, and coating-related waste materials from one location to another in closed containers or pipes. NR 422.084(8)(8) Cleaning material work practices. The owner or operator of an affected facility under this section shall do all of the following for cleaning materials: NR 422.084(8)(a)(a) Store all VOC-containing cleaning materials and used shop towels in closed containers. NR 422.084(8)(b)(b) Ensure that storage containers used for VOC-containing materials are kept closed at all times except when depositing or removing those materials. NR 422.084(8)(c)(c) Convey VOC-containing cleaning materials from one location to another in closed containers or pipes. NR 422.084(8)(e)(e) Minimize emissions of VOCs during cleaning of coating application, storage, mixing, and conveying equipment by ensuring that cleaning is performed without atomizing any VOC-containing cleaning material and that the used material is captured and contained. NR 422.084(10)(a)(a) Compliance schedule. The owner or operator of a facility with plastic parts coating operations shall comply with the applicable requirements of this section upon the facility becoming subject to this section as provided under sub. (1), except for any of the following: NR 422.084(10)(a)1.1. The owner or operator of a facility with plastic parts coating operations subject to this section that commenced construction before June 1, 2022, shall comply with applicable requirements of this section by November 28, 2022. Any facility that was subject to s. NR 422.083 before June 1, 2022, shall continue to comply with the requirements in s. NR 422.083 until the date when the facility is in compliance with the applicable requirements of this section or until November 28, 2022, whichever is sooner. NR 422.084(10)(a)2.2. The owner or operator of a facility with plastic parts coating operations that becomes subject to this section due to either the designation or the reclassification of a nonattainment area that occurs after June 1, 2022, shall comply with applicable requirements of this section 180 days after the effective date of the nonattainment designation or reclassification, as indicated by the relevant Federal Register publication. NR 422.084(10)(b)(b) Certification. No later than 60 days after the compliance deadline specified under par. (a), the owner or operator of a facility with plastic parts coating operations subject to this section shall submit to the department written certification that all affected plastic parts coating operations are in compliance with the applicable requirements of this section. The owner or operator of a facility subject to s. NR 422.083 before June 1, 2022, that is required to have an operation permit under ch. NR 407 shall submit to the department a permit application or a permit revision or renewal application that meets the requirements of s. NR 407.05 to meet this certification requirement, except that no application shall be required for a source operating under a general operation permit or a registration operation permit issued under s. NR 407.10 or 407.105. NR 422.084 HistoryHistory: CR 20-088: cr. Register May 2022 No. 797, eff. 6-1-22; correction in (10) (a) 1. made under s. 13.92 (4) (b) 14., Stats., Register May 2022 No. 797. NR 422.085(1)(1) Applicability. Effective February 1, 1987, this section applies to coating applications at leather coating facilities which are either of the following: NR 422.085(1)(a)(a) Located in the county of Kenosha, Milwaukee, Ozaukee, Racine, Washington, or Waukesha, and which have maximum theoretical emissions of VOC from the facility greater than or equal to 25 tons per year. NR 422.085(1)(b)(b) Located in the county of Door, Kewaunee, Manitowoc, Sheboygan, or Walworth, and which have maximum theoretical emissions of VOC from the facility greater than or equal to 100 tons per year. NR 422.085(2)(2) Emission limitations. No owner or operator of a leather coating facility may cause, allow or permit the emission of any VOCs from coating applications in excess of 18.6 kilograms per 100 square meters (38.0 pounds per 1000 square feet) of coated product calculated on a daily average basis. NR 422.085(3)(3) Compliance requirements and schedules. The owner or operator of a leather coating facility shall comply with the requirements of sub. (4) and s. NR 425.03 (1), (8), and (9). NR 422.085(4)(a)(a) To determine compliance with the leather coating VOC emission limit in this section, the facility shall maintain daily coating usage and leather production records in a format approved by the department. Reporting, recordkeeping and access to these records shall be in accordance with ss. NR 439.03 to 439.05. NR 422.085(4)(b)(b) The daily VOC emission rate shall be determined by the following equation:
/exec_review/admin_code/nr/400/422
true
administrativecode
/exec_review/admin_code/nr/400/422/084/3/b/8
Department of Natural Resources (NR)
Chs. NR 400-499; Environmental Protection – Air Pollution Control
administrativecode/NR 422.084(3)(b)8.
administrativecode/NR 422.084(3)(b)8.
section
true
