Chapter NR 421

Register July 2009 No. 643

Chapter NR 421

CONTROL OF ORGANIC COMPOUND EMISSIONS FROM CHEMICAL, COATINGS AND RUBBER PRODUCTS MANUFACTURING

NR 421.01   Applicability; purpose.

NR 421.02   Definitions.

NR 421.03   Chemical manufacture.

NR 421.04   Pneumatic rubber tire manufacture.

NR 421.05   Synthetic resin manufacturing.

NR 421.06   Coatings manufacturing.

NR 421.07   Synthetic organic chemical manufacturing industry.

NR 421.01 NR 421.01 Applicability; purpose.

NR 421.01(1) (1) Applicability. This chapter applies to all chemical, coatings and rubber products manufacturing air contaminant sources and to their owners and operators.

NR 421.01(2) (2) Purpose. This chapter is adopted under ss. 285.11, 285.13, and 285.17, Stats., to categorize organic compound emissions from chemical, coatings and rubber products manufacturing sources into separate organic compound air contaminant source categories and to establish emission limitations for these categories of sources in order to protect air quality.

NR 421.01 History History: Cr. Register, September, 1986, No. 369, eff. 10-1-86; am. Register, February, 1990, No. 410, eff. 3-1-90; corrections made in (2) made under s. 13.93 (2m) (b) 7., Stats., Register, December, 1996, No. 492.

NR 421.02 NR 421.02 Definitions. Except when another definition is specifically made applicable, the definitions contained in chs. NR 400, 419, and 420 apply to the terms used in this chapter. In addition, except when another definition is specifically made applicable, in this chapter and in chs. NR 422 to 425:

NR 421.02(1) (1) “Bead dipping” means the dipping of an assembled tire bead into a solvent based cement.

NR 421.02(2) (2) “Blending tank” means any vessel in which resin, coating or other materials, or any combination thereof, are added to produce product blend.

NR 421.02(3) (3) “Coatings manufacturing facility” means any facility which mixes, blends or compounds paints, varnishes, lacquers, enamels, shellacs or sealers, and which is classified under standard industrial classification code 2851, as described in the Standard Industrial Classification Manual, 1987, incorporated by reference in s. NR 484.05.

NR 421.02(4) (4) “Completed resin” is any resin which has completed its processing and is available for use in the basic components of plastics or as a component of surface coating formulations.

NR 421.02(5) (5) “Green tires” means assembled tires before molding and curing have occurred.

NR 421.02(6) (6) “Green tire spraying” means the spraying of green tires, both inside and outside, with release compounds which help remove air from the tire during molding and prevent the tire from sticking to the mold after curing.

NR 421.02(7) (7) “Grinding mill” means any mill with cylindrical chambers containing grinding media such as balls, pebbles, or sand which grind and disperse coating solids.

NR 421.02(8) (8) “High speed dispersion mill” means any mixer with one or more blades that rotate at high speed in order to disperse coating solids.

NR 421.02(9) (9) “Passenger type tire” means agricultural, airplane, industrial, mobile home, light and medium duty truck, and passenger vehicle tires with a bead diameter up to 50.8 cm (20 inches) and cross section dimension up to 32.5 cm (12.8 inches).

NR 421.02(10) (10) “Pneumatic rubber tire manufacture” means the production of pneumatic rubber passenger type tires on a mass production basis.

NR 421.02(11) (11) “Production equipment exhaust system” means a device for collecting and directing out of the work area fugitive emissions from reactor openings, centrifuge openings, and other vessel openings at a pharmaceutical manufacturing plant.

NR 421.02(12) (12) “Reaction tank” means any piece of equipment in which organic or other materials are reacted to produce a resin. A reaction tank may include a stripping column, condensers, and a water separator, which return the evaporated solvent to the reaction vessel.

NR 421.02(13) (13) “Reactor” means a vat or vessel, which may be jacketed to permit temperature control, designed to contain chemical reactions.

NR 421.02(14) (14) “Resin” means a solid or semi-solid, water-insoluble, organic material with little or no tendency to crystallize and which is used as the basic components of plastics or as a component of surface-coating formulations.

NR 421.02(15) (15) “Roller mill” means any mill with horizontal rollers that grind and disperse coating solids.

NR 421.02(16) (16) “Synthesized pharmaceutical manufacturing” means manufacture of pharmaceutical products by chemical synthesis.

NR 421.02(17) (17) “Synthetic resin manufacturing facility” means any facility which reacts organic compounds to produce a synthetic resin and which is classified under standard industrial classification code 2821, as described in the Standard Industrial Classification Manual, 1987, incorporated by reference in s. NR 484.05.

NR 421.02(18) (18) “Thinning tank” means any vessel in which resin, coating, or other products are combined with solvents to thin the product.

NR 421.02(18m) (18m) “Tote tank” means any transportable container used to convey coatings, inks, adhesives, or any other related materials, with a capacity equal to or greater than 209 liters (55 gallons).

NR 421.02(19) (19) “Tread end cementing” means the application of a solvent based cement to tire tread ends.

NR 421.02(20) (20) “Undertread cementing” means the application of a solvent based cement to the underside of a tire tread.

NR 421.02(21) (21) “VOC emission leak” means a fugitive emission of volatile organic compounds from any valve, pump, sealed agitator, compressor, flange or relief valve for which the fugitive VOC concentration is measured to exceed 10,000 ppm when tested according to Method 21 in Appendix A of 40 CFR part 60, incorporated by reference in s. NR 484.04.

NR 421.02(22) (22) “Water based sprays” means release compounds, sprayed on the inside and outside of green tires, in which solids, water, and emulsifiers have been substituted for all organic solvents.

NR 421.02(23) (23) “Wipe cleaning” means cleaning which utilizes a material such as a rag wetted with a solvent, prior to a physical rubbing process to remove contaminants from surfaces.

NR 421.02 History History: Renum. from NR 154.01, cr. (1m), (2e), (2s), (4e), (4s), (9m), (10e), (10s), (11e) and (11s), Register, September, 1986, No. 369, eff. 10-1-86; renum. (2) and (5) to be NR 400.02 (22) and (51m), cr. (12m), Register, February, 1990, No. 410, eff. 3-1-90; renum. (10) and (11) to be (10w) and (11w) under s. 13.93 (2m) (b) 1., Stats., Register, August, 1990, No. 416; renum. (1m) to be (2), Register, May, 1992, No. 437, eff. 6-1-92; am. (2e) and (11e), Register, December, 1993, No. 456, eff. 1-1-94; am. (intro.), renum. (2e) to (13) to be (3) to (22) and am. (3), (17) and (21), Register, December, 1995, No. 480, eff. 1-1-96; CR 11-005: cr. (18m), (23) Register January 2012 No. 673, eff. 2-1-12; CR 20-088: am. (intro.) Register May 2022 No. 797, eff. 6-1-22.

NR 421.03 NR 421.03 Chemical manufacture.

NR 421.03(1) (1) Pharmaceutical manufacture.

NR 421.03(1)(a) (a) Applicability. This subsection applies, subject to the provisions of s. NR 425.03, to all operations at pharmaceutical manufacturing facilities involved in the manufacture of pharmaceutical products by chemical synthesis, with the exception of any reactor, distillation unit, dryer, filter, crystallizer, centrifuge, or other individual operation that has an actual emission rate of less than 6.8 kilograms per day (15 pounds per day) with all emission control equipment inoperative.

NR 421.03(1)(b) (b) Emission control requirements. Except as provided under par. (a), the owner or operator of a synthesized pharmaceutical manufacturing facility shall:

NR 421.03(1)(b)1. 1. Equip each vent from reactors, distillation operations, crystallizers, centrifuges, or vacuum dryers with surface condensers or an equally effective control device as approved by the department. If a surface condenser is used, the condenser outlet gas temperature may not exceed:

NR 421.03(1)(b)1.a. a. -25°C (-13°F) for VOCs with vapor pressure greater than 40 kPa (5.8 psia) as measured at 20°C (68°F).

NR 421.03(1)(b)1.b. b. - 15°C (5°F) for VOCs with vapor pressure between 20 kPa (2.9 psia) and 40 kPa (5.8 psia) as measured at 20°C (68°F).

NR 421.03(1)(b)1.c. c. 0°C (32°F) for VOCs with vapor pressure between 10 kPa (1.5 psia) and 20 kPa (2.9 psia) as measured at 20°C (68°F).

NR 421.03(1)(b)1.d. d. 10°C (50°F) for VOCs with vapor pressure between 7 kPa (1.0 psia) and 10 kPa (1.5 psia) as measured at 20°C (68°F).

NR 421.03(1)(b)1.e. e. 25°C (77°F) for VOCs with vapor pressure between 3.5 kPa (0.5 psia) and 7 kPa (1.0 psia) as measured at 20°C (68°F).

NR 421.03(1)(b)2. 2. Limit the VOC emissions from air dryer exhaust systems and production equipment exhaust systems to 15.0 kilograms per day (33 pounds per day) or to 10% of the uncontrolled emission rate of the system, whichever is less stringent.

NR 421.03(1)(b)3. 3. Enclose all centrifuges, rotary vacuum filters, and any other filters having an exposed liquid surface, where the liquid contains VOCs and exerts a total VOC vapor pressure of 3.5 kPa (0.5 psia) or more at 20°C (68°F).

NR 421.03(1)(b)4. 4. Install covers on all in-process tanks that contain a VOC at any time. Covers are to be closed except for necessary operator access during production, sampling, maintenance or inspection.

NR 421.03(1)(b)5. 5. Repair all visually detectable leaks of liquid VOCs the first time the equipment is off-line for a period long enough to complete the repair.

NR 421.03(2) (2) Transfer of VOCs at pharmaceutical manufacturing facilities.

NR 421.03(2)(a) (a) Applicability. Subject to the provisions of s. NR 425.03, this subsection applies to all storage vessels for VOCs of more than 7,751 liter (2,000 gallon) capacity at a synthetic pharmaceutical manufacturing facility.

NR 421.03(2)(b) (b) Emission reduction requirements. No owner or operator of a synthetic pharmaceutical manufacturing facility may permit the delivery of VOCs with vapor pressure in excess of 28.0 kPa (4.1 psia) at 20°C from a truck or railcar to the storage vessel unless a vapor balance or equivalent control system is provided. The system must be at least 90% effective in reducing emissions from transfer operations.

NR 421.03(3) (3) Storage of VOCs at pharmaceutical manufacturing facilities.

NR 421.03(3)(a) (a) Applicability. This subsection applies, subject to the provisions of s. NR 425.03, to all storage vessels for VOCs of more than 3,785 liters (1,000 gallon) capacity at synthetic pharmaceutical manufacturing facilities.

NR 421.03(3)(b) (b) Storage requirements. The owner or operator of any storage vessel shall install pressure-vacuum conservation vents set at ±0.2 kPa, or an equally effective control device approved by the department, on all storage vessels that store VOCs with vapor pressures in excess of 10.5 kPa (1.52 psia) at 21°C (70°F).

NR 421.03 History History: Renum. from NR 154.13 (2) (b), (3) (e) and (9) and am., Register, September, 1986, No. 369, eff. 10-1-86; am. (1) (b) 1. and (2) (b), Register, February, 1990, No. 410, eff. 3-1-90; am. (1) (a), Register, December, 1993, No. 456, eff. 1-1-94.

NR 421.04 NR 421.04 Pneumatic rubber tire manufacture.

NR 421.04(1) (1) Applicability. This section applies, subject to the provisions of s. NR 425.03, to all pneumatic rubber tire manufacturing facilities involved in undertread cementing, tread end cementing, bead dipping, or green tire spraying operations.