Chapter NR 273

NR 273.003(37) (37) “Rolling” means the reduction in thickness or diameter of a workpiece by passing it between lubricated steel rollers.

NR 273.003(38) (38) “Roll bonding” means the process by which a permanent bond is created between 2 metals by rolling under high pressure in a bonding mill.

NR 273.003(39) (39) “Sawing” means cutting a workpiece with a band, blade, or circular disc having teeth.

NR 273.003(40) (40) “Shot casting” means the production of shot by pouring molten metal in finely divided streams to form spherical particles.

NR 273.003(41) (41) “Stationary casting” means the pouring of molten metal into molds and allowing the metal to cool.

NR 273.003(42) (42) “Surface treatment” means a chemical or electrochemical treatment applied to the surface of a metal, such as pickling, etching, conversion coating, phosphating, and chromating, and any rinse or multiple stage rinsing which follows.

NR 273.003(43) (43) “Swaging” means a process in which a solid point is formed at the end of a tube, rod, or bar by the repeated blows of one or more pairs of opposing dies.

NR 273.003(44) (44) “Tube reducing” means an operation which reduces the diameter and wall thickness of tubing with a mandrel and a pair of rolls with tapered grooves.

NR 273.003(45) (45) “Tumbling” means an operation in which castings, forgings, or parts pressed from metal powder are rotated in a barrel with ceramic or metal slugs or abrasives to remove scale, fins, or burrs, either dry or with an aqueous solution.

NR 273.003(46) (46) “Ultrasonic testing” means a nondestructive test in which sound at a frequency above 20 Hz is applied to metal which has been immersed in a liquid, usually water, to locate inhomogeneities or structural discontinuities.

NR 273.003(47) (47) “Wet air pollution control scrubbers” means air pollution control devices used to remove particulates and fumes from the air by entraining the pollutants in water spray.

NR 273.003 History History: Cr. Register, September, 1990, No. 417, eff. 10-1-90.

NR 273.004 NR 273.004 Compliance dates.

NR 273.004(1) (1) Any existing source subject to this chapter which discharges to waters of the state shall achieve:

NR 273.004(1)(a) (a) The effluent limitations representing BPT by July 1, 1977; and

NR 273.004(1)(b) (b) The effluent limitations representing BAT by July 1, 1984.

NR 273.004(2) (2) Any new source subject to this chapter which discharges to waters of the state shall achieve NSPS at the commencement of discharge.

NR 273.004(3) (3) Any existing source subject to this chapter which discharges to a POTW shall achieve PSES by August 23, 1988.

NR 273.004(4) (4) Any new source subject to this chapter which discharges to a POTW shall achieve PSNS at the commencement of discharge.

NR 273.004 History History: Cr. Register, September, 1990, No. 417, eff. 10-1-90.

subch. I of ch. NR 273 Subchapter I — Lead-Tin-Bismuth

NR 273.01 NR 273.01 Applicability; description of the lead-tin-bismuth subcategory. This subchapter applies to the discharge of pollutants to waters of the state and the introduction of pollutants into POTWs from lead-tin-bismuth forming.

NR 273.01 History History: Cr. Register, September, 1990, No. 417, eff. 10-1-90.

NR 273.011 NR 273.011 Discharge prohibitions. Any facility subject to this subchapter may not discharge process wastewater pollutants from the following sources:

NR 273.011(1) (1) Drawing spent neat oils; and

NR 273.011(2) (2) Degreasing spent solvents.

NR 273.011 History History: Cr. Register, September, 1990, No. 417, eff. 10-1-90.

NR 273.012 NR 273.012 Effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available. Except as provided in 40 CFR 125.30 to 125.32, any existing point source subject to this subchapter shall achieve the following effluent limitations representing the degree of effluent reduction attainable by application of BPT:

NR 273.012 History History: Cr. Register, September, 1990, No. 417, eff. 10-1-90.

NR 273.013 NR 273.013 Effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable. Except as provided in 40 CFR 125.30 to 125.32, any existing point source subject to this subchapter shall achieve the following effluent limitations representing the degree of effluent reduction attainable by application of BAT:

NR 273.013 History History: Cr. Register, September, 1990, No. 417, eff. 10-1-90.

NR 273.014 NR 273.014 New source performance standards. Any new source subject to this subchapter shall achieve the following standards:

NR 273.014 History History: Cr. Register, September, 1990, No. 417, eff. 10-1-90.

NR 273.015 NR 273.015 Pretreatment standards for existing sources. Except as provided in ss. NR 211.13 and 211.14, any existing source subject to this subchapter which introduces pollutants into a POTW shall comply with ch. NR 211 and achieve the limitations set forth in s. NR 273.013.

NR 273.015 History History: Cr. Register, September, 1990, No. 417, eff. 10-1-90.

NR 273.016 NR 273.016 Pretreatment standards for new sources. Except as provided in s. NR 211.13, any new source subject to this subchapter which introduces pollutants into a POTW shall comply with ch. NR 211 and achieve the limitations set forth in s. NR 273.013.

NR 273.016 History History: Cr. Register, September, 1990, No. 417, eff. 10-1-90.

subch. II of ch. NR 273 Subchapter II — Magnesium

NR 273.02 NR 273.02 Applicability; description of the magnesium subcategory. This subchapter applies to the discharge of pollutants to waters of the state and the introduction of pollutants into POTWs from magnesium forming.

NR 273.02 History History: Cr. Register, September, 1990, No. 417, eff. 10-1-90.

NR 273.021 NR 273.021 Discharge prohibitions. Any facility subject to this subchapter may not discharge process wastewater pollutants from the following sources:

NR 273.021(1) (1) Forging spent lubricants; and

NR 273.021(2) (2) Degreasing spent solvents.

NR 273.021 History History: Cr. Register, September, 1990, No. 417, eff. 10-1-90.

NR 273.022 NR 273.022 Effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available. Except as provided in 40 CFR 125.30 to 125.32, any existing point source subject to this subchapter shall achieve the following effluent limitations representing the degree of effluent reduction attainable by application of BPT:

NR 273.022 History History: Cr. Register, September, 1990, No. 417, eff. 10-1-90.

NR 273.023 NR 273.023 Effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable. Except as provided in 40 CFR 125.30 to 125.32, any existing point source subject to this subchapter shall achieve the following effluent limitations representing the degree of effluent reduction attainable by application of BAT:

NR 273.023 History History: Cr. Register, September, 1990, No. 417, eff. 10-1-90.

NR 273.024 NR 273.024 New source performance standards. Any new source subject to this subchapter shall achieve the following standards:

NR 273.024 History History: Cr. Register, September, 1990, No. 417, eff. 10-1-90.

NR 273.025 NR 273.025 Pretreatment standards for existing sources. Except as provided in ss. NR 211.13 and 211.14, any existing source subject to this subchapter which introduces pollutants into a POTW shall comply with ch. NR 211 and achieve the limitations set forth in s. NR 273.023.

NR 273.025 History History: Cr. Register, September, 1990, No. 417, eff. 10-1-90.

NR 273.026 NR 273.026 Pretreatment standards for new sources. Except as provided in s. NR 211.13, any new source subject to this subchapter which introduces pollutants into a POTW shall comply with ch. NR 211 and achieve the limitations set forth in s. NR 273.023.

NR 273.026 History History: Cr. Register, September, 1990, No. 417, eff. 10-1-90.

subch. III of ch. NR 273 Subchapter III — Nickel-Cobalt

NR 273.03 NR 273.03 Applicability; description of the nickel-cobalt subcategory. This subchapter applies to the discharge of pollutants to waters of the state and the introduction of pollutants into POTWs from nickel-cobalt forming.

NR 273.03 History History: Cr. Register, September, 1990, No. 417, eff. 10-1-90.

NR 273.031 NR 273.031 Discharge prohibitions.

NR 273.031(1) (1) Any facility subject to this subchapter may not discharge process wastewater pollutants from the following sources:

NR 273.031(1)(a) (a) Rolling spent neat oils;

NR 273.031(1)(b) (b) Drawing spent neat oils;

NR 273.031(1)(c) (c) Extrusion spent lubricants;

NR 273.031(1)(d) (d) Forging spent lubricants;

NR 273.031(1)(e) (e) Vacuum melting steam condensate;

NR 273.031(1)(f) (f) Annealing and solution heat treatment contact cooling water;

NR 273.031(1)(g) (g) Hydrostatic tube testing and ultrasonic testing wastewater; and

NR 273.031(1)(h) (h) Degreasing spent solvents.

NR 273.031(2) (2) Tube reducing spent lubricants.

NR 273.031(2)(a) (a) Tube reducing spent lubricant process wastewater pollutants may not be discharged, except as provided in par. (b).

NR 273.031(2)(b) (b) Tube reducing spent lubricant process wastewater pollutants may be discharged, with no allowance for any pollutants discharged, if the facility owner or operator demonstrates according to pars. (c), (d), (e), and (f) that the concentrations of nitrosamine compounds in the discharged wastewater do not exceed the following levels:

NR 273.031(2)(c) (c) For the demonstration required by par. (b), the facility owner or operator shall use the analytical methods approved by ch. NR 219, Table C.

NR 273.031(2)(d) (d) The demonstration required by par. (b) shall be made once per month until the demonstration has been made for all 3 nitrosamine compounds for 6 consecutive months. After this time, the demonstration may be made once per quarter. If a sample is found to contain any of the 3 nitrosamine compounds at concentrations greater than those specified in par. (b), the actions set forth in par. (e) shall be taken and the demonstration required by par. (b) shall be made once per month until it has been made for all 3 nitrosamine compounds for 6 consecutive months.

NR 273.031(2)(e) (e) If sampling results show that any of the 3 nitrosamine compounds is present in the process wastewater at concentrations greater than those set forth in par. (b), the facility owner or operator shall ensure that starting within 30 days of receiving written notification of the sampling results no tube reducing spent lubricant wastewater is discharged until one of the following conditions is met:

NR 273.031(2)(e)1. 1. The owner or operator performs a subsequent analysis which demonstrates that the concentrations of 3 regulated nitrosamine compounds do not exceed the levels set forth in par. (b); or

NR 273.031(2)(e)2. 2. The owner or operator substitutes a new tube reducing lubricant and thereafter complies with the requirements of par. (d); or

NR 273.031(2)(e)3. 3. Determines the source of the pollutants whose concentration exceeded the level set forth in par. (b) and demonstrates to the satisfaction of the permit issuing authority that the source has been eliminated.

NR 273.031(2)(f) (f) The concentration limits specified in par. (b) apply at the point of discharge from the tube reducing process. However, sampling after the tube reducing wastewater has been commingled with other wastewaters is permitted if 2 conditions are met:

NR 273.031(2)(f)1. 1. Any dilution caused by the other wastewaters is accounted for when determining the appropriate allowable discharge concentration; and

NR 273.031(2)(f)2. 2. An analytical method of sufficient sensitivity is used to measure the levels of each of the 3 nitrosamine compounds in the wastewater being sampled.

NR 273.031 History History: Cr. Register, September, 1990, No. 417, eff. 10-1-90.

NR 273.032 NR 273.032 Effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available. Except as provided in 40 CFR 125.30 to 125.32, any existing point source subject to this subchapter shall achieve the following effluent limitations representing the degree of effluent reduction attainable by application of BPT:

NR 273.032 History History: Cr. Register, September, 1990, No. 417, eff. 10-1-90.

NR 273.033 NR 273.033 Effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable. Except as provided in 40 CFR 125.30 to 125.32, any existing point source subject to this subchapter shall achieve the following effluent limitations representing the degree of effluent reduction attainable by application of BAT:

NR 273.033 History History: Cr. Register, September, 1990, No. 417, eff. 10-1-90.

NR 273.034 NR 273.034 New source performance standards. Any new source subject to this subchapter shall achieve the following standards:

NR 273.034 History History: Cr. Register, September, 1990, No. 417, eff. 10-1-90.

NR 273.035 NR 273.035 Pretreatment standards for existing sources. Except as provided in ss. NR 211.13 and 211.14, any existing source subject to this subchapter which introduces pollutants into a POTW shall comply with ch. NR 211 and achieve the limitations set forth in s. NR 273.033.

NR 273.035 History History: Cr. Register, September, 1990, No. 417, eff. 10-1-90.

NR 273.036 NR 273.036 Pretreatment standards for new sources. Except as provided in s. NR 211.13, any new source subject to this subchapter which introduces pollutants into a POTW shall comply with ch. NR 211 and achieve the limitations set forth in s. NR 273.033.