NR 235.70 HistoryHistory: Cr. Register, March, 1997, No. 495, eff. 4-1-97. NR 235.71NR 235.71 Effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available (BPT). Except as provided in 40 CFR 125.30 to 125.32, and in s. NR 235.02 (9) for point sources with production in 2 or more subcategories, any existing point source subject to this section shall achieve the following limitations: NR 235.71(1)(1) Limitations shall be calculated by multiplying the following concentrations by the manufacturing process wastewater flow: NR 235.71(2)(2) The pH shall be within the range of 6.0 to 9.0 at all times. NR 235.71 HistoryHistory: Cr. Register, March, 1997, No. 495, eff. 4-1-97. NR 235.72NR 235.72 Effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable (BAT). NR 235.72(1)(1) For existing point sources whose total OCPSF production defined by s. NR 235.02 is less than or equal to 5 million pounds of OCPSF products per year, the BAT level of treatment shall be the same as the BPT level of treatment. NR 235.72(2)(2) Except as provided in sub. (1) and in 40 CFR 125.30 to 125.32, any existing point source that uses end-of-pipe biological treatment and is subject to this subchapter shall achieve discharges in accordance with s. NR 235.81. NR 235.72(3)(3) Except as provided in sub. (1) and in 40 CFR 125.30 to 125.32, any existing point source that does not use end-of-pipe biological treatment and is subject to this subchapter shall achieve discharges in accordance with s. NR 235.91. NR 235.72 HistoryHistory: Cr. Register, March, 1997, No. 495, eff. 4-1-97. NR 235.73NR 235.73 New source performance standards (NSPS). NR 235.73(1)(1) Any new source that uses end-of-pipe biological treatment and is subject to this subchapter: NR 235.73(2)(2) Any new source that does not use end-of-pipe biological treatment and is subject to this section: NR 235.73 HistoryHistory: Cr. Register, March, 1997, No. 495, eff. 4-1-97. NR 235.74NR 235.74 Pretreatment standards for existing sources (PSES). Except as provided in ss. NR 211.13 and 211.14, any existing source subject to this subchapter which introduces pollutants into a POTW shall comply with ch. NR 211 and achieve discharges in accordance with s. NR 235.99. NR 235.74 HistoryHistory: Cr. Register, March, 1997, No. 495, eff. 4-1-97. NR 235.75NR 235.75 Pretreatment standards for new sources (PSNS). Except as provided in s. NR 211.13 any new source subject to this subchapter which introduces pollutants into a POTW shall comply with ch. NR 211 and achieve discharges in accordance with s. NR 235.99. NR 235.75 HistoryHistory: Cr. Register, March, 1997, No. 495, eff. 4-1-97. NR 235.80NR 235.80 Applicability; description of the subcategory of direct discharge point sources that use end-of-pipe biological treatment. This subchapter applies to the process wastewater discharges resulting from the manufacture of the OCPSF products and products groups defined by s. NR 235.02 from any point source that uses end-of-pipe biological treatment or installs end-of-pipe biological treatment to comply with BPT effluent limitations. NR 235.80 HistoryHistory: Cr. Register, March, 1997, No. 495, eff. 4-1-97. NR 235.81NR 235.81 Toxic pollutant effluent limitations and standards for direct discharge point sources that use end-of-pipe biological treatment. NR 235.81(1)(1) Any point source subject to this subchapter must achieve discharges not exceeding the quantity determined by multiplying the process wastewater flow times the concentrations in the following table. NR 235.81(2)(2) For chromium, copper, lead, nickel, zinc and total cyanide: NR 235.81(2)(a)(a) The discharge quantity shall be determined by multiplying the concentrations listed in the following table for these pollutants times the flow from the metal-bearing waste streams for the metals and times the flow from the cyanide bearing waste streams for total cyanide. NR 235.81(2)(b)(b) The metal-bearing waste streams and cyanide-bearing waste streams are defined as: NR 235.81(2)(b)2.2. Any additional OCPSF process wastewater streams identified by the permitting authority on a case-by-case basis as metal or cyanide bearing based upon a determination that such streams contain significant amounts of the pollutants identified above. NR 235.81(2)(c)(c) Any streams designated under par. (b) 2. shall be treated independently of other metal or cyanide bearing waste streams unless the permitting authority determines that the combination of such streams, prior to treatment, with the Appendix A waste streams will result in substantial reduction of these pollutants. This determination shall be based upon a review of relevant engineering, production and sampling information. 1All units are micrograms per liter.
2Total zinc for rayon fiber manufacture that uses the viscose process and acrylic fiber manufacture that uses the zinc chloride/solvent process is 6,796 mg/l maximum for any one day and 3,325 mg/l maximum for monthly average.
NR 235.81 HistoryHistory: Cr. Register, March, 1997, No. 495, eff. 4-1-97. subch. X of ch. NR 235Subchapter X - Direct Discharge Point Sources That Do Not Use End-of-Pipe Biological Treatment NR 235.90NR 235.90 Applicability; description of the subcategory of direct discharge point sources that do not use end-of-pipe biological treatment. This subchapter applies to the process wastewater discharges resulting from the manufacture of the OCPSF products and product groups defined by s. NR 235.02 from any point source that does not use end-of-pipe biological treatment and does not install end-of-pipe biological treatment to comply with BPT effluent limitations. NR 235.90 HistoryHistory: Cr. Register, March, 1997, No. 495, eff. 4-1-97. NR 235.91NR 235.91 Toxic pollutant effluent limitations and standards for direct discharge point sources that do not use end-of-pipe biological treatment. NR 235.91(1)(1) Any point source subject to this subchapter must achieve discharges not exceeding the quantity determined by multiplying the process wastewater flow times the concentrations in the following table. NR 235.91(2)(2) For chromium, copper, lead, nickel, zinc and total cyanide: NR 235.91(2)(a)(a) The discharge quantity shall be determined by multiplying the concentrations listed in the following table for these pollutants times the flow from the metal-bearing waste streams for the metals and times the flow from the cyanide bearing waste streams for total cyanide. NR 235.91(2)(b)(b) The metal-bearing waste streams and cyanide-bearing waste streams are defined as: NR 235.91(2)(b)2.2. Any additional OCPSF process wastewater streams identified by the permitting authority on a case-by-case basis as metal or cyanide bearing based upon a determination that such streams contain significant amounts of the pollutants identified above. NR 235.91(2)(c)(c) Any streams designated under par. (b) 2. shall be treated independently of other metal or cyanide bearing waste streams unless the permitting authority determines that the combination of such streams, prior to treatment, with the Appendix A waste streams will result in substantial reduction of these pollutants. This determination shall be based upon a review of relevant engineering, production and sampling information. 1All units are micrograms per liter.
2Total Zinc for rayon fiber manufacture that uses the viscose process and acrylic fibers manufacture that uses the zinc chloride/solvent process is 6,796 mg/l maximum for any one day and 3,325 mg/l maximum for monthly average.
NR 235.91 HistoryHistory: Cr. Register, March, 1997, No. 495, eff. 4-1-97. NR 235.98NR 235.98 Applicability; description of the subcategory of indirect discharge point sources. This subchapter applies to the process wastewater discharges resulting from the manufacture of the OCPSF products and products groups defined by s. NR 235.02 from any indirect discharge point source. NR 235.98 HistoryHistory: Cr. Register, March, 1997, No. 495, eff. 4-1-97. NR 235.99NR 235.99 Toxic pollutant standards for indirect discharge point sources. NR 235.99(1)(1) Any point source subject to this subchapter must achieve discharges not exceeding the quantity determined by multiplying the process wastewater flow times the concentrations in the following table. NR 235.99(2)(2) For chromium, copper, lead, nickel, zinc and total cyanide: NR 235.99(2)(a)(a) The discharge quantity shall be determined by multiplying the concentrations listed in the following table for these pollutants times the flow from the metal-bearing waste streams for the metals and times the flow from the cyanide bearing waste streams for total cyanide. NR 235.99(2)(b)(b) The metal-bearing waste streams and cyanide-bearing waste streams are defined as: NR 235.99(2)(b)2.2. Any additional OCPSF process wastewater streams identified by the permitting authority on a case-by-case basis as metal or cyanide bearing based upon a determination that such streams contain significant amounts of the pollutants identified above. NR 235.99(2)(c)(c) Any streams designated under par. (b) 2. shall be treated independently of other metal or cyanide bearing waste streams unless the permitting authority determines that the combination of such streams, prior to treatment, with the Appendix A waste streams will result in substantial reduction of these pollutants. This determination shall be based upon a review of relevant engineering, production, and sampling information. 1All units are micrograms per liter.
2Total zinc for rayon fiber manufacture that uses the viscose process and acrylic fiber manufacture that uses the zinc chloride/solvent process is 6,796 mg/l maximum for any one day and 3,325 mg/l maximum monthly average.
NR 235.99 HistoryHistory: Cr. Register, March, 1997, No. 495, eff. 4-1-97. APPENDIX A TO CHAPTER NR 235 - NONCOMPLEXED METAL-BEARING WASTE STREAMS AND CYANIDE-BEARING WASTE STREAMS Copper Bearing Waste Streams
Nickel Bearing Waste Streams
Zinc Bearing Waste Streams
NR 235.99 NoteNote: The Wisconsin administrative code corresponds to the code of federal regulations according to the following table:
