NR 233.03(2e)(2e) “Formulation of pesticide products” means the process of mixing, blending, or diluting one or more of the pesticide active ingredients with one or more active or inert ingredients, without an intended chemical reaction, to obtain a manufacturing use product or an end use product. NR 233.03(2o)(2o) “Group one mixtures” means any product whose only pesticide active ingredient is: NR 233.03(2p)(2p) “Group 2 mixtures” means those chemicals listed in Table 9. NR 233.03(2q)(2q) “Inorganic wastewater treatment chemicals” means inorganic chemicals that are commonly used in wastewater treatment systems to aid in the removal of pollutants through physical and chemical technologies such as chemical precipitation, flocculation, neutralization, chemical oxidation, hydrolysis, or adsorption. NR 233.03(2r)(2r) “Interior wastewater” means any wastewater that is generated from cleansing or rinsing the interior of pesticide formulating, packaging, or repackaging equipment, raw material drums, shipping containers, or bulk storage tanks. Also included is cooling water that comes into direct contact with pesticide active ingredients during the formulating, packaging, or repackaging process. NR 233.03(2u)(2u) “Microbial pesticides” means registered pesticide active ingredients that are biological control agents listed in 40 CFR 152.20(a)(3) including protozoa, algae, fungi, bacteria and viruses. NR 233.03(3)(3) “New source” means any point source for which the commencement of construction occurred after April 10, 1992, in subchs. II and III and after April 14, 1994 for subchs. IV and VI and from which pollutants are or may be discharged either to waters of the state or into a publicly owned treatment works. NR 233.03(3e)(3e) “Packaging of pesticide products” means enclosing or placing a formulated pesticide product into a marketable container. NR 233.03(4)(b)(b) Any other form of terrestrial or aquatic plant or animal life. NR 233.03(4)(c)(c) Any virus, bacteria or other micro-organism, except viruses, bacteria or other micro-organisms on or in living man or other living animals, which the administrator declares to be a pest under the Federal Insecticide, Fungicide and Rodenticide Act, 7 USC 136 et.seq. NR 233.03(5)(5) “Pesticide” means any substance or mixture of substances intended for preventing, destroying, repelling or mitigating any pest. NR 233.03(6)(6) “Pesticide chemicals” means the sum of all active ingredients manufactured at each facility covered by this chapter. NR 233.03(6e)(6e) “PFPR/manufacturing facility” means a pesticide formulating, packaging, or repackaging facility that also performs pesticide manufacturing on-site and commingles their PFPR process wastewaters and pesticide manufacturing process wastewaters. NR 233.03(6o)(6o) “Pool chemicals” means pesticide products that are intended to disinfect or sanitize, reduce or mitigate growth or development of microbiological organisms in the water of swimming pools, hot tubs, spas, or other such areas in the household or institutional environment as provided in the directions for use on the product label. NR 233.03(8)(8) “Refilling establishment” means an establishment where the activity of repackaging a pesticide product occurs. NR 233.03(9)(9) “Repackaging of pesticide products” means the transfer of a pesticide formulation or pesticide active ingredients from one container to another without a change in composition of the formulation or the labeling content for sale or distribution. NR 233.03(10)(10) “Sanitizer products” means pesticide products that are intended to disinfect or sanitize, reduce or mitigate growth or development of microbiological organisms on inanimate surfaces in the household, institutional, or commercial environments and whose labeled directions for use result in the product being discharged to a POTW. This definition also includes sanitizer solutions as defined by 21 CFR 178.1010 and pool chemicals as defined in this section. This definition does not include liquid chemical sterilants, including sporicidals, exempted by s. NR 233.30 (3) (f) or industrial preservatives and water treatment microbiocides other than pool chemicals. NR 233.03(11)(11) “Stand-alone PFPR facility” means a PFPR facility where either no pesticide manufacturing occurs or pesticide manufacturing process wastewaters are not commingled with PFPR process wastewaters. Facilities may formulate, package, repackage, or manufacture other non-pesticide chemical products and be considered a stand-alone PFPR facility. NR 233.03 HistoryHistory: Cr. Register, March, 1997, No. 495, eff. 4-1-97; cr. (1e), (1o), (2e) to (2u), (3e), (6e), (6o), (8) to (11), am. (3), Register, May, 2001, No. 545, eff. 6-1-01. NR 233.04(1)(1) Any existing source subject to this chapter which discharges to waters of the state shall achieve: NR 233.04(1)(a)(a) The effluent limitations representing BPT by July 1, 1977; and NR 233.04(1)(b)(b) The effluent limitations representing BAT by July 1, 1984. NR 233.04(2)(2) Any new source subject to this chapter which discharges to waters of the state shall achieve NSPS at the commencement of discharge. NR 233.04(3)(3) Any existing source subject to subchs. II and III which introduces process wastewater pollutants into a POTW shall achieve PSES by September 28, 1996. NR 233.04(3e)(3e) Any existing source subject to subchs. IV and VI which introduces process wastewater pollutants into a POTW shall achieve PSES by November 6, 1999. NR 233.04(4)(4) Any new source subject to this chapter which introduces process wastewater pollutants into a POTW shall achieve PSNS at the commencement of discharge. NR 233.04 HistoryHistory: Cr. Register, March, 1997, No. 495, eff. 4-1-97; am. (3), cr. (3e), Register, May, 2001, No. 545, eff. 6-1-01. NR 233.10NR 233.10 Applicability; description of the organic pesticide chemicals manufacturing subcategory. NR 233.10(1)(1) For the purpose of calculating and applying effluent limitations for COD, BOD5, and TSS, and applying pH limits under BPT in s. NR 233.12, BCT in s. NR 233.13, and NSPS in s. NR 233.15: NR 233.10(1)(a)(a) This subchapter applies to discharges resulting from the manufacture of organic pesticide active ingredients and organo-tin pesticide active ingredients except those listed in par. (b). Allethrin Naphthalene acetic acid
Benzyl benzoate Propargite
Bisethlyxanthogen 1,8 Naphthalic anhydride
Chlorophacinone Quinmethionate
Coumafuryl Rotenone
Dimethyl phthalate Sulfoxide
Diphacinone Triazine compounds, both
Endothall acid symmetrical and EXD (Herbisan) asymmetrical
Gibberellic acid Warfarin and similar
Glyphosate anticoagulants.
NR 233.10(1)(c)(c) The effluent limitations of this subchapter for BOD5 and TSS, but not COD, apply to the manufacturers of the following: Ametryn Prometryn
Atrazine Propazine
Cyanazine Simazine
Glyphosate Terbuthylazine
Hexazinone Terbutryn
Prometon
NR 233.10(2)(2) For the purpose of calculating BPT effluent limitations in s. NR 233.12 for organic pesticide chemicals, this subchapter applies to discharges resulting from the manufacture of the following organic active ingredients: 2,4-D Fenuron
2,4,5-T Fenuron-TCA
Aldrin Heptachlor
Aminocarb Lindane
Azinphos methyl Linuron
Barban Malathion
BHC Methiocarb
Captan Methoxychlor
Carbaryl Mexacarbate
Chlordane Mirex
Chlorpropham Monuron
Diazinon Monuron-TCA
DDD Neubron
DDE Parathion ethyl
DDT Parathion methyl
Demeton-O PCNB
Demeton-S Perthane
Dicamba Propham
Dichloran Propoxur
Dicofol Siduron
Dieldrin Silvex
Disulfoton Swep
Diuron Toxaphene
Endosulfan Trifluralin
Endrin
NR 233.10(3)(3) This subchapter does not apply to the intermediates used to manufacture the active ingredients, and active ingredients used solely in experimental pesticides. BPT coverage in this subchapter does not apply to insecticidal pathogenic organisms such as bacillus thuringiensis, insect growth hormones, plant extracts such as pyrethrins, sex attractants and botanicals such as Rotenone. NR 233.10(4)(4) A plant that manufactures a pesticide active ingredient listed in Table 1 shall comply with the BAT effluent limitations, new source performance standards, and pretreatment standards both for that ingredient listed in Table 2 or Table 3, and for priority pollutants listed in Tables 4, 5 and 6. The limitations apply as follows: NR 233.10(4)(a)(a) Table 4 - BAT and NSPS - applies to existing and new direct discharge point sources that use end-of-pipe biological treatment. NR 233.10(4)(b)(b) Table 5 - BAT and NSPS - applies to existing and new direct discharge point sources that do not use end-of-pipe biological treatment. NR 233.10(4)(c)(c) Table 6 - PSES and PSNS - applies to existing and new sources that discharge to POTWs.
