Wisconsin Legislature: NR 230.3815

NR 230.36 HistoryHistory: Cr. Register, September, 1990, No. 417, eff. 10-1-90.

NR 230.362NR 230.362 Effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available. Except as provided in 40 CFR 125.30 to 125.32, any existing point source subject to this subchapter shall achieve the following effluent limitations representing the degree of effluent reduction attainable by application of BPT:

NR 230.362 Note(1) Within the range of 6.0 to 9.0

NR 230.362 HistoryHistory: Cr. Register, September, 1990, No. 417, eff. 10-1-90.

NR 230.363NR 230.363 Effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable. Except as provided in 40 CFR 125.30 to 125.32, any existing point source subject to this subchapter shall achieve limitations set forth in s. NR 230.362 for copper, nickel, and selenium.

NR 230.363 HistoryHistory: Cr. Register, September, 1990, No. 417, eff. 10-1-90.

NR 230.364NR 230.364 New source performance standards. Any new [existing] source subject to this subchapter shall achieve the limitations set forth in s. NR 230.362.

NR 230.364 HistoryHistory: Cr. Register, September, 1990, No. 417, eff. 10-1-90.

NR 230.365NR 230.365 Pretreatment standards for existing sources. Except as provided in ss. NR 211.13 and 211.14, any new [existing] source subject to the copper salts subchapter which introduces pollutants into a POTW shall comply with ch. NR 211 and achieve the following PSES:

NR 230.365 Note(1) When a POTW finds that mass limitations are necessary, the PSES shall be the limitations set forth in s. NR 230.362 for copper, nickel, and selenium.

NR 230.365 HistoryHistory: Cr. Register, September, 1990, No. 417, eff. 10-1-90.

NR 230.366NR 230.366 Pretreatment standards for new sources. Except as provided in s. NR 211.13, any new source subject to this subchapter which introduces pollutants into a POTW shall comply with ch. NR 211 and achieve the standards set forth in s. NR 230.365.

NR 230.366 HistoryHistory: Cr. Register, September, 1990, No. 417, eff. 10-1-90.

NR 230.367NR 230.367 Effluent limitations representing the degree of effluent reduction attainable by the application of the best conventional pollutant control technology. Except as provided in 40 CFR 125.30 to 125.32, any existing point source subject to this subchapter shall achieve the effluent limitations set forth in s. NR 230.362 for TSS and pH.

NR 230.367 HistoryHistory: Cr. Register, September, 1990, No. 417, eff. 10-1-90.

subch. XXXVIII of ch. NR 230Subchapter XXXVIII — Ferric chloride

NR 230.38NR 230.38 Applicability; description of the ferric chloride subcategory. This subchapter applies to the discharge of pollutants to waters of the state and the introduction of pollutants into POTWs from the production of ferric chloride from pickle liquor.

NR 230.38 HistoryHistory: Cr. Register, September, 1990, No. 417, eff. 10-1-90.

NR 230.381NR 230.381 Specialized definitions. The following definitions apply to the terms used in this subchapter:

NR 230.381(1)(1) “Contaminated nonprocess wastewater” means any water which, during manufacturing or processing, comes into incidental contact with any raw material, intermediate product, finished product, byproduct, or waste product.

NR 230.381(2)(2) “Incidental contact” means contact resulting from:

NR 230.381(2)(a)(a) Rainfall runoff;

NR 230.381(2)(b)(b) Accidental spills;

NR 230.381(2)(c)(c) Accidental leaks which are caused by failure of process equipment and which are repaired within the shortest reasonable time not to exceed 24 hours after discovery; and

NR 230.381(2)(d)(d) Discharges from safety showers and related personal safety equipment.

NR 230.381(3)(3) “Process wastewater” means any water which, during manufacturing or processing, comes into contact with or results from the production or use of any raw material, intermediate product, finished product, byproduct, or waste product, except for contaminated nonprocess wastewater.

NR 230.381(4)(4) “Process wastewater pollutants” means pollutants present in the process wastewater.

NR 230.381 HistoryHistory: Cr. Register, September, 1990, No. 417, eff. 10-1-90.

NR 230.3815NR 230.3815 Regulation of contaminated nonprocess wastewater. Contaminated nonprocess wastewater shall be regulated as process wastewater unless all reasonable measures have been taken to prevent, reduce, and control incidental contact and to mitigate the effects of incidental contact after it has occurred.

NR 230.3815 HistoryHistory: Cr. Register, September, 1990, No. 417, eff. 10-1-90.

NR 230.382NR 230.382 Effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available. Except as provided in 40 CFR 125.30 to 125.32, any existing point source subject to this subchapter may not discharge process wastewater pollutants into waters of the state.

NR 230.382 HistoryHistory: Cr. Register, September, 1990, No. 417, eff. 10-1-90.

NR 230.385NR 230.385 Pretreatment standards for existing sources. Except as provided in ss. NR 211.13 and 211.14, any existing source subject to this subchapter which introduces pollutants into a POTW shall comply with ch. NR 211 and achieve the following PSES:

NR 230.385 HistoryHistory: Cr. Register, September, 1990, No. 417, eff. 10-1-90.

NR 230.386NR 230.386 Pretreatment standards for new sources. Except as provided in s. NR 211.13, any new source subject to this subchapter which introduces pollutants into a POTW shall comply with ch. NR 211 and may not discharge process wastewater pollutants into a POTW.

NR 230.386 HistoryHistory: Cr. Register, September, 1990, No. 417, eff. 10-1-90.

subch. XL of ch. NR 230Subchapter XL — Fluorine

NR 230.40NR 230.40 Applicability; description of the fluorine subcategory. This subchapter applies to the discharge of pollutants to waters of the state and the introduction of pollutants into POTWs from the production of fluorine by the liquid hydrofluoric acid electrolysis process.

NR 230.40 HistoryHistory: Cr. Register, September, 1990, No. 417, eff. 10-1-90.

NR 230.401NR 230.401 Specialized definitions. The following definitions apply to the terms used in this subchapter:

NR 230.401(1)(1) “Contaminated nonprocess wastewater” means any water which, during manufacturing or processing, comes into incidental contact with any raw material, intermediate product, finished product, byproduct, or waste product.

NR 230.401(2)(2) “Incidental contact” means contact resulting from:

NR 230.401(2)(a)(a) Rainfall runoff;

NR 230.401(2)(b)(b) Accidental spills;

NR 230.401(2)(c)(c) Accidental leaks which are caused by failure of process equipment and which are repaired within the shortest reasonable time not to exceed 24 hours after discovery; and

NR 230.401(2)(d)(d) Discharges from safety showers and related personal safety equipment.

NR 230.401(3)(3) “Process wastewater” means any water which, during manufacturing or processing, comes into contact with or results from the production or use of any raw material, intermediate product, finished product, byproduct, or waste product, except for contaminated nonprocess wastewater.

NR 230.401(4)(4) “Process wastewater pollutants” means pollutants present in the process wastewater.

NR 230.401 HistoryHistory: Cr. Register, September, 1990, No. 417, eff. 10-1-90.

NR 230.4015NR 230.4015 Regulation of contaminated nonprocess wastewater. Contaminated nonprocess wastewater shall be regulated as process wastewater unless all reasonable measures have been taken to prevent, reduce, and control incidental contact and to mitigate the effects of incidental contact after it has occurred.

NR 230.4015 HistoryHistory: Cr. Register, September, 1990, No. 417, eff. 10-1-90.

NR 230.402NR 230.402 Effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available. Except as provided in 40 CFR 125.30 to 125.32, any existing point source subject to this subchapter may not discharge process wastewater pollutants into waters of the state.

NR 230.402 HistoryHistory: Cr. Register, September, 1990, No. 417, eff. 10-1-90.

NR 230.406NR 230.406 Pretreatment standards for new sources. Except as provided in s. NR 211.13, any new source subject to this subchapter which introduces pollutants into a POTW shall comply with ch. NR 211 and may not discharge process wastewater pollutants into a POTW.

NR 230.406 HistoryHistory: Cr. Register, September, 1990, No. 417, eff. 10-1-90.

subch. XLI of ch. NR 230Subchapter XLI — Hydrogen

NR 230.41NR 230.41 Applicability; description of the hydrogen subcategory. This subchapter applies to the discharge of pollutants to waters of the state and the introduction of pollutants into POTWs from the production of hydrogen as a refinery byproduct.

NR 230.41 HistoryHistory: Cr. Register, September, 1990, No. 417, eff. 10-1-90.

NR 230.411NR 230.411 Specialized definitions. The following definitions apply to the terms used in this subchapter:

NR 230.411(1)(1) “Contaminated nonprocess wastewater” means any water which, during manufacturing or processing, comes into incidental contact with any raw material, intermediate product, finished product, byproduct, or waste product, if all reasonable measures have been taken to prevent, reduce, and control incidental contact and to mitigate the effects of incidental contact after it has occurred.

NR 230.411(2)(2) “Incidental contact” means contact resulting from:

NR 230.411(2)(a)(a) Rainfall runoff;

NR 230.411(2)(b)(b) Accidental spills;

NR 230.411(2)(c)(c) Accidental leaks which are caused by failure of process equipment and which are repaired within the shortest reasonable time not to exceed 24 hours after discovery; and

NR 230.411(2)(d)(d) Discharges from safety showers and related personal safety equipment.

NR 230.411(3)(3) “Process wastewater” means any water which, during manufacturing or processing, comes into contact with or results from the production or use of any raw material, intermediate product, finished product, byproduct, or waste product, except for contaminated nonprocess wastewater.

NR 230.411(4)(4) “Process wastewater pollutants” means pollutants present in the process wastewater.

NR 230.411 HistoryHistory: Cr. Register, September, 1990, No. 417, eff. 10-1-90.

NR 230.412NR 230.412 Effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available. Except as provided in 40 CFR 125.30 to 125.32, any existing point source subject to this subchapter may not discharge process wastewater pollutants into waters of the state, except as provided in ch. NR 279.

NR 230.412 HistoryHistory: Cr. Register, September, 1990, No. 417, eff. 10-1-90.

subch. XLII of ch. NR 230Subchapter XLII — Hydrogen cyanide

NR 230.42NR 230.42 Applicability; description of the hydrogen cyanide subcategory. This subchapter applies to the discharge of pollutants to waters of the state and the introduction of pollutants into POTWs from the production of hydrogen cyanide by the Andrussow process.

NR 230.42 HistoryHistory: Cr. Register, September, 1990, No. 417, eff. 10-1-90.

NR 230.422NR 230.422 Effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available. Except as provided in 40 CFR 125.30 to 125.32, any existing point source subject to this subchapter shall achieve the following effluent limitations representing the degree of effluent reduction attainable by application of BPT:

NR 230.422 Note(1) Within the range of 6.0 to 10.5

NR 230.422 HistoryHistory: Cr. Register, September, 1990, No. 417, eff. 10-1-90.

NR 230.423NR 230.423 Effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable. Except as provided in 40 CFR 125.30 to 125.32, any existing point source subject to this subchapter shall achieve the following effluent limitations representing the degree of effluent reduction attainable by application of BAT:

NR 230.423 HistoryHistory: Cr. Register, September, 1990, No. 417, eff. 10-1-90.

NR 230.424NR 230.424 New source performance standards. Any new source subject to this subchapter shall achieve the following NSPS:

NR 230.424 Note(1) Within the range of 6.0 to 10.5

NR 230.424 HistoryHistory: Cr. Register, September, 1990, No. 417, eff. 10-1-90.

NR 230.426NR 230.426 Pretreatment standards for new sources. Except as provided in s. NR 211.13, any new source subject to this subchapter which introduces pollutants into a POTW shall comply with ch. NR 211 and achieve the following PSNS:

NR 230.426 Note(1) When a POTW finds that mass limitations are necessary, the PSNS shall be the limitations set forth in s. NR 230.424 for cyanide A and total cyanide.

NR 230.426 HistoryHistory: Cr. Register, September, 1990, No. 417, eff. 10-1-90.

NR 230.427NR 230.427 Effluent limitations representing the degree of effluent reduction attainable by the application of the best conventional pollutant control technology. Except as provided in 40 CFR 125.30 to 125.32, any existing point source subject to this subchapter shall achieve the effluent limitations set forth in s. NR 230.422 for TSS and pH.

NR 230.427 HistoryHistory: Cr. Register, September, 1990, No. 417, eff. 10-1-90.

subch. XLIII of ch. NR 230Subchapter XLIII — Iodine

NR 230.43NR 230.43 Applicability; description of the iodine subcategory. This subchapter applies to the discharge of pollutants to waters of the state and the introduction of pollutants into POTWs from the production of iodine.