NR 230.174 HistoryHistory: Cr. Register, September, 1990, No. 417, eff. 10-1-90. NR 230.176NR 230.176 Pretreatment standards for new sources. Except as provided in s. NR 211.13, any new source subject to this subchapter which introduces pollutants into a POTW shall comply with ch. NR 211 and shall achieve the following PSNS: NR 230.176 Note(1)When a POTW finds that mass limitations are necessary, the PSNS shall be the standards set forth in s. NR 230.172 for total chromium, hexavalent chromium, and nickel. NR 230.176 HistoryHistory: Cr. Register, September, 1990, No. 417, eff. 10-1-90. NR 230.177NR 230.177 Effluent limitations representing the degree of effluent reduction attainable by the application of the best conventional pollutant control technology. Except as provided in 40 CFR 125.30 to 125.32, any existing point source subject to this subchapter shall achieve the limitations set forth in s. NR 230.172 for TSS and pH. NR 230.177 HistoryHistory: Cr. Register, September, 1990, No. 417, eff. 10-1-90. NR 230.20NR 230.20 Applicability; description of the sodium sulfite subcategory. This subchapter applies to the discharge of pollutants to waters of the state and the introduction of pollutants into POTWs from the production of sodium sulfite by reacting sulfur dioxide with sodium carbonate. NR 230.20 HistoryHistory: Cr. Register, September, 1990, No. 417, eff. 10-1-90. NR 230.202NR 230.202 Effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available. Except as provided in 40 CFR 125.30 to 125.32, any existing point source subject to this subchapter shall achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of BPT: NR 230.202 Note(1) Within the range of 6.0 to 9.0
NR 230.202 HistoryHistory: Cr. Register, September, 1990, No. 417, eff. 10-1-90. NR 230.203NR 230.203 Effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable. Except as provided in 40 CFR 125.30 to 125.32 any existing point source subject to this subchapter shall achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of BAT: NR 230.203 HistoryHistory: Cr. Register, September, 1990, No. 417, eff. 10-1-90. NR 230.204NR 230.204 New source performance standards. Any new source subject to this subchapter shall achieve the following NSPS:
NR 230.204 Note(1) Within the range of 6.0 to 9.0
NR 230.204 HistoryHistory: Cr. Register, September, 1990, No. 417, eff. 10-1-90. NR 230.206NR 230.206 Pretreatment standards for new sources. Except as provided in s. NR 211.13, any new source subject to this subchapter which introduces pollutants into a POTW shall comply with ch. NR 211 and shall achieve the following PSNS: NR 230.206 Note(1) When a POTW finds that mass limitations are necessary, the PSNS shall be the standards set forth in s. NR 230.204 for total chromium, total zinc, and COD. NR 230.206 HistoryHistory: Cr. Register, September, 1990, No. 417, eff. 10-1-90. NR 230.22NR 230.22 Applicability; description of the titanium dioxide subcategory. This subchapter applies to the discharge of pollutants to waters of the state and the introduction of pollutants into POTWs from the production of titanium dioxide by the sulfate process, the chloride process, and the chloride-ilmenite process. NR 230.22 HistoryHistory: Cr. Register, September, 1990, No. 417, eff. 10-1-90. NR 230.222NR 230.222 Effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available. Except as provided in 40 CFR 125.30 to 125.32, any existing point source subject to this subchapter shall achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of BPT: NR 230.222 Note(1) Within the range of 6.0 to 9.0
NR 230.222 Note(1) Within the range of 6.0 to 9.0
NR 230.222 Note(1) Within the range of 6.0 to 9.0
NR 230.222 HistoryHistory: Cr. Register, September, 1990, No. 417, eff. 10-1-90. NR 230.223NR 230.223 Effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable. Except as provided in 40 CFR 125.30 to 125.32 any existing point source subject to this subchapter shall achieve the limitations set forth in s. NR 230.222 for chromium and nickel. NR 230.223 HistoryHistory: Cr. Register, September, 1990, No. 417, eff. 10-1-90. NR 230.224NR 230.224 New source performance standards. Any new source subject to this subchapter shall achieve the following NSPS: NR 230.224 Note(1) Within the range of 6.0 to 9.0
NR 230.224 Note(1) Within the range of 6.0 to 9.0
NR 230.224 Note(1) Within the range of 6.0 to 9.0
NR 230.224 HistoryHistory: Cr. Register, September, 1990, No. 417, eff. 10-1-90. NR 230.226NR 230.226 Pretreatment standards for new sources. Except as provided in s. NR 211.13, any new source subject to this subchapter which introduces pollutants into a POTW shall comply with ch. NR 211 and shall achieve the following PSNS: NR 230.226 Note(1) When a POTW finds that mass limitations are necessary, the PSNS shall be the standards set forth in s. NR 230.224 for chromium, iron, and nickel. NR 230.226 Note(1) When a POTW finds that mass limitations are necessary, the PSNS shall be the standards set forth in s. NR 230.224 for chromium, iron, and nickel. NR 230.226 Note(1) When a POTW finds that mass limitations are necessary, the PSNS shall be the standards set forth in s. NR 230.224 for chromium, iron, and nickel. NR 230.226 HistoryHistory: Cr. Register, September, 1990, No. 417, eff. 10-1-90. NR 230.227NR 230.227 Effluent limitations representing the degree of effluent reduction attainable by the application of the best conventional pollutant control technology. Except as provided in 40 CFR 125.30 to 125.32, any existing point source subject to this subchapter shall achieve the limitations set forth in s. NR 230.222 for TSS and pH. NR 230.227 HistoryHistory: Cr. Register, September, 1990, No. 417, eff. 10-1-90. NR 230.23NR 230.23 Applicability; description of the aluminum fluoride subcategory. This subchapter applies to the discharge of pollutants to waters of the state and the introduction of pollutants into POTWs from the production of aluminum fluoride by the dry process in which partially dehydrated alumina hydrate is reacted with hydrofluoric acid gas. NR 230.23 HistoryHistory: Cr. Register, September, 1990, No. 417, eff. 10-1-90. NR 230.232NR 230.232 Effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available. Except as provided in 40 CFR 125.30 to 125.32, any existing point source subject to this subchapter shall achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of BPT: NR 230.232 Note(1) Within the range of 6.0 to 9.0
NR 230.232 HistoryHistory: Cr. Register, September, 1990, No. 417, eff. 10-1-90. NR 230.233NR 230.233 Effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable. Except as provided in 40 CFR 125.30 to 125.32 any existing point source subject to this subchapter shall achieve the limitations set forth in s. NR 230.232 for fluoride, chromium, and nickel. NR 230.233 HistoryHistory: Cr. Register, September, 1990, No. 417, eff. 10-1-90. NR 230.234NR 230.234 New source performance standards. Any new source subject to this subchapter shall achieve the standards set forth in s. NR 230.232. NR 230.234 HistoryHistory: Cr. Register, September, 1990, No. 417, eff. 10-1-90. NR 230.237NR 230.237 Effluent limitations representing the degree of effluent reduction attainable by the application of the best conventional pollutant control technology. Except as provided in 40 CFR 125.30 to 125.32 any existing point source subject to this subchapter shall achieve the limitations set forth in s. NR 230.232 for TSS and pH. NR 230.237 HistoryHistory: Cr. Register, September, 1990, No. 417, eff. 10-1-90. NR 230.24NR 230.24 Applicability; description of the ammonium chloride subcategory. This subchapter applies to the discharge of pollutants to waters of the state and the introduction of pollutants into POTWs from the production of ammonium chloride by the reaction of anhydrous ammonia with hydrogen chloride gas and by the recovery process from Solvay process wastes. NR 230.24 HistoryHistory: Cr. Register, September, 1990, No. 417, eff. 10-1-90. NR 230.241NR 230.241 Specialized definitions. The following definitions apply to the terms used in this subchapter: NR 230.241(1)(1) “Contaminated nonprocess wastewater” means any water which, during manufacturing or processing, comes into incidental contact with any raw material, intermediate product, finished product, byproduct, or waste product. NR 230.241(2)(2) “Incidental contact” means contact resulting from: NR 230.241(2)(c)(c) Accidental leaks which are caused by failure of process equipment and which are repaired within the shortest reasonable time not to exceed 24 hours after discovery; and NR 230.241(2)(d)(d) Discharges from safety showers and related personal safety equipment. NR 230.241(3)(3) “Process wastewater” means any water which, during manufacturing or processing, comes into contact with or results from the production or use of any raw material, intermediate product, finished product, byproduct, or waste product, except for contaminated nonprocess wastewater. NR 230.241(4)(4) “Process wastewater pollutants” means pollutants present in the process wastewater. NR 230.241 HistoryHistory: Cr. Register, September, 1990, No. 417, eff. 10-1-90. NR 230.2415NR 230.2415 Regulation of contaminated nonprocess wastewater. Contaminated nonprocess wastewater shall be regulated as process wastewater unless all reasonable measures have been taken to prevent, reduce, and control incidental contact and to mitigate the effects of incidental contact after it has occurred. NR 230.2415 HistoryHistory: Cr. Register, September, 1990, No. 417, eff. 10-1-90. NR 230.242NR 230.242 Effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available. NR 230.242(1)(1) Except as provided in 40 CFR 125.30 to 125.32, any existing point source subject to this subchapter which reacts anhydrous ammonia with hydrogen gas may not discharge process wastewater pollutants to waters of the state. NR 230.242(2)(2) Except as provided in 40 CFR 125.30 to 125.32, any existing point source subject to this subchapter which uses the recovery process from Solvay process wastes shall achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of BPT: NR 230.242 Note(1) Within the range of 6.0 to 9.0
NR 230.242 HistoryHistory: Cr. Register, September, 1990, No. 417, eff. 10-1-90. NR 230.27NR 230.27 Applicability; description of the borax subcategory. This subchapter applies to the discharge of pollutants to waters of the state and the introduction of pollutants into POTWs from the production of borax by the ore mining process and by the Trona process. NR 230.27 HistoryHistory: Cr. Register, September, 1990, No. 417, eff. 10-1-90. NR 230.272NR 230.272 Effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available. Except as provided in 40 CFR 125.30 to 125.32, any existing point source subject to this subchapter may not discharge process wastewater pollutants to waters of the state, but residual brine and depleted liquor may be returned to the body of water from which the process brine solution was originally drawn. NR 230.272 HistoryHistory: Cr. Register, September, 1990, No. 417, eff. 10-1-90. NR 230.276NR 230.276 Pretreatment standards for new sources. Except as provided in s. NR 211.13, any new source subject to this subchapter which introduces pollutants into a POTW shall comply with ch. NR 211 and achieve the limitations set forth in s. NR 230.272. NR 230.276 HistoryHistory: Cr. Register, September, 1990, No. 417, eff. 10-1-90. NR 230.28NR 230.28 Applicability; description of the boric acid subcategory. This subchapter applies to the discharge of pollutants to waters of the state and the introduction of pollutants into POTWs from the production of boric acid from either ore mined borax or borax produced by the Trona process. NR 230.28 HistoryHistory: Cr. Register, September, 1990, No. 417, eff. 10-1-90. NR 230.282NR 230.282 Effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available. NR 230.282(1)(1) Except as provided in 40 CFR 125.30 to 125.32, any existing point source subject to this subchapter which uses borax made by the Trona process may not discharge process wastewater pollutants into waters of the state, but residual brine and depleted liquor may be returned to the body of water from which the process brine solution was originally withdrawn. NR 230.282(2)(2) Except as provided in 40 CFR 125.30 to 125.32, any existing point source subject to this subchapter which uses ore mined borax shall achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of BPT: NR 230.282 Note(1) Within the range of 6.0 to 9.0
NR 230.282 HistoryHistory: Cr. Register, September, 1990, No. 417, eff. 10-1-90.
