Skip navigation Wisconsin State Legislature
This is the preview version of the Wisconsin State Legislature site.
Please see http://docs.legis.wisconsin.gov for the production version.
Up
NR 230.601(3)(3) “Process wastewater” means any water which, during manufacturing or processing, comes into contact with or results from the production or use of any raw material, intermediate product, finished product, byproduct, or waste product, except for contaminated nonprocess wastewater.
NR 230.601(4)(4) “Process wastewater pollutants” means pollutants present in the process wastewater.
NR 230.601 HistoryHistory: Cr. Register, September, 1990, No. 417, eff. 10-1-90.
NR 230.6015NR 230.6015 Regulation of contaminated nonprocess wastewater. Contaminated nonprocess wastewater shall be regulated as process wastewater unless all reasonable measures have been taken to prevent, reduce, and control incidental contact and to mitigate the effects of incidental contact after it has occurred.
NR 230.6015 HistoryHistory: Cr. Register, September, 1990, No. 417, eff. 10-1-90.
NR 230.602NR 230.602 Effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available. Except as provided in 40 CFR 125.30 to 125.32, any existing point source subject to this subchapter may not discharge wastewater pollutants to waters of the state.
NR 230.602 HistoryHistory: Cr. Register, September, 1990, No. 417, eff. 10-1-90.
NR 230.606NR 230.606 Pretreatment standards for new sources. Except as provided in s. NR 211.13, any new source subject to this subchapter which introduces pollutants into a POTW shall comply with ch. NR 211 and may not discharge process wastewater pollutants into a POTW.
NR 230.606 HistoryHistory: Cr. Register, September, 1990, No. 417, eff. 10-1-90.
subch. LXIII of ch. NR 230Subchapter LXIII — Zinc sulfate
NR 230.63NR 230.63 Applicability; description of the zinc sulfate subcategory. This subchapter applies to the discharge of pollutants to waters of the state and the introduction of pollutants into POTWs from the production of zinc sulfate.
NR 230.63 HistoryHistory: Cr. Register, September, 1990, No. 417, eff. 10-1-90.
NR 230.631NR 230.631 Specialized definitions. The following definitions apply to the terms used in this subchapter:
NR 230.631(1)(1) “Contaminated nonprocess wastewater” means any water which, during manufacturing or processing, comes into incidental contact with any raw material, intermediate product, finished product, byproduct, or waste product.
NR 230.631(2)(2) “Incidental contact” means contact resulting from:
NR 230.631(2)(a)(a) Rainfall runoff;
NR 230.631(2)(b)(b) Accidental spills;
NR 230.631(2)(c)(c) Accidental leaks which are caused by failure of process equipment and which are repaired within the shortest reasonable time not to exceed 24 hours after discovery; and
NR 230.631(2)(d)(d) Discharges from safety showers and related personal safety equipment.
NR 230.631(3)(3) “Process wastewater” means any water which, during manufacturing or processing, comes into contact with or results from the production or use of any raw material, intermediate product, finished product, byproduct, or waste product, except for contaminated nonprocess wastewater.
NR 230.631(4)(4) “Process wastewater pollutants” means pollutants present in the process wastewater.
NR 230.631 HistoryHistory: Cr. Register, September, 1990, No. 417, eff. 10-1-90.
NR 230.6315NR 230.6315 Regulation of contaminated nonprocess wastewater. Contaminated nonprocess wastewater shall be regulated as process wastewater unless all reasonable measures have been taken to prevent, reduce, and control incidental contact and to mitigate the effects of incidental contact after it has occurred.
NR 230.6315 HistoryHistory: Cr. Register, September, 1990, No. 417, eff. 10-1-90.
NR 230.632NR 230.632 Effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available. Except as provided in 40 CFR 125.30 to 125.32, any existing point source subject to this subchapter may not discharge wastewater pollutants to waters of the state.
NR 230.632 HistoryHistory: Cr. Register, September, 1990, No. 417, eff. 10-1-90.
NR 230.636NR 230.636 Pretreatment standards for new sources. Except as provided in s. NR 211.13, any new source subject to this subchapter which introduces pollutants into a POTW shall comply with ch. NR 211 and may not discharge process wastewater pollutants into a POTW.
NR 230.636 HistoryHistory: Cr. Register, September, 1990, No. 417, eff. 10-1-90.
subch. LXIV of ch. NR 230Subchapter LXIV — Cadmium pigments and salts
NR 230.64NR 230.64 Applicability; description of the cadmium pigments and salts subcategory. This subchapter applies to the discharge of pollutants to waters of the state and the introduction of pollutants into POTWs from the production of cadmium pigments and salts, such as cadmium chloride, cadmium nitrate, and cadmium sulfate.
NR 230.64 HistoryHistory: Cr. Register, September, 1990, No. 417, eff. 10-1-90.
NR 230.642NR 230.642 Effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available. Except as provided in 40 CFR 125.30 to 125.32, any existing point source subject to this subchapter shall achieve the following effluent limitations representing the degree of effluent reduction attainable by application of BPT:
NR 230.642 Note(1) Within the range of 6.0 to 9.0
NR 230.642 Note(1) Within the range of 6.0 to 9.0
NR 230.642 HistoryHistory: Cr. Register, September, 1990, No. 417, eff. 10-1-90.
NR 230.643NR 230.643 Effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable. Except as provided in 40 CFR 125.30 to 125.32, any existing point source subject to this subchapter shall achieve the limitations set forth in s. NR 230.642 for cadmium, selenium, and zinc.
NR 230.643 HistoryHistory: Cr. Register, September, 1990, No. 417, eff. 10-1-90.
NR 230.644NR 230.644 New source performance standards. Any new source subject to this subchapter shall achieve the limitations set forth in s. NR 230.642.
NR 230.644 HistoryHistory: Cr. Register, September, 1990, No. 417, eff. 10-1-90.
NR 230.645NR 230.645 Pretreatment standards for existing sources.
NR 230.645(1)(1) Except as provided in ss. NR 211.13 and 211.14, any existing source subject to this subchapter which introduces pollutants into a POTW shall comply with ch. NR 211 and achieve the following PSES:
NR 230.645 Note(1) When a POTW finds that mass limitations are necessary, the PSES shall be the limitations set forth in s. NR 230.642 for cadmium, selenium, and zinc.
NR 230.645 HistoryHistory: Cr. Register, September, 1990, No. 417, eff. 10-1-90.
NR 230.646NR 230.646 Pretreatment standards for new sources. Except as provided in s. NR 211.13, any new source subject to this subchapter which introduces pollutants into a POTW shall comply with ch. NR 211 and achieve the standards set forth in s. NR 230.645 for cadmium, selenium, and zinc.
NR 230.646 HistoryHistory: Cr. Register, September, 1990, No. 417, eff. 10-1-90.
NR 230.647NR 230.647 Effluent limitations representing the degree of effluent reduction attainable by the application of the best conventional pollutant control technology. Except as provided in 40 CFR 125.30 to 125.32, any existing point source subject to this subchapter shall achieve the effluent limitations set forth in s. NR 230.642 for TSS and pH.
NR 230.647 HistoryHistory: Cr. Register, September, 1990, No. 417, eff. 10-1-90.
subch. LXV of ch. NR 230Subchapter LXV — Cobalt salts
NR 230.65NR 230.65 Applicability; description of the cobalt salts subcategory. This subchapter applies to the discharge of pollutants to waters of the state and the introduction of pollutants into POTWs from the production of cobalt salts.
NR 230.65 HistoryHistory: Cr. Register, September, 1990, No. 417, eff. 10-1-90.
NR 230.652NR 230.652 Effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available. Except as provided in 40 CFR 125.30 to 125.32, any existing point source subject to this subchapter shall achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of BPT:
NR 230.652 Note(1) Within the range 6.0 to 9.0
NR 230.652 HistoryHistory: Cr. Register, September, 1990, No. 417, eff. 10-1-90.
NR 230.653NR 230.653 Effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable. Except as provided in 40 CFR 125.30 to 125.32, any existing point source subject to this subchapter shall achieve the limitations set forth in s. NR 230.652 for cobalt, copper, and nickel.
NR 230.653 HistoryHistory: Cr. Register, September, 1990, No. 417, eff. 10-1-90.
NR 230.654NR 230.654 New source performance standards. Any new source subject to this subchapter shall achieve the limitations set forth in s. NR 230.652.
NR 230.654 HistoryHistory: Cr. Register, September, 1990, No. 417, eff. 10-1-90.
NR 230.655NR 230.655 Pretreatment standards for existing sources. Except as provided in ss. NR 211.13 and 211.14, any existing source subject to this subchapter which introduces pollutants into a POTW shall comply with ch. NR 211 and achieve the following PSES:
NR 230.655 Note(1) When a POTW finds that mass limitations are necessary, the PSES shall be the limitations set forth in s. NR 230.652 for cobalt, copper, and nickel.
NR 230.655 HistoryHistory: Cr. Register, September, 1990, No. 417, eff. 10-1-90.
NR 230.656NR 230.656 Pretreatment standards for new sources. Except as provided in s. NR 211.13, any new source subject to this subchapter which introduces pollutants into a POTW shall comply with ch. NR 211 and achieve the standards set forth in s. NR 230.655 for cobalt, copper, and nickel.
NR 230.656 HistoryHistory: Cr. Register, September, 1990, No. 417, eff. 10-1-90.
NR 230.657NR 230.657 Effluent limitations representing the degree of effluent reduction attainable by the application of the best conventional pollutant control technology. Except as provided in 40 CFR 125.30 to 125.32, any existing point source subject to this subchapter shall achieve the effluent limitations set forth in s. NR 230.652 for TSS and pH.
NR 230.657 HistoryHistory: Cr. Register, September, 1990, No. 417, eff. 10-1-90.
subch. LXVI of ch. NR 230Subchapter LXVI — Sodium chlorate
NR 230.66NR 230.66 Applicability; description of the sodium chlorate subcategory. This subchapter applies to the discharge of pollutants to waters of the state and the introduction of pollutants into POTWs from the production of sodium chlorate.
NR 230.66 HistoryHistory: Cr. Register, September, 1990, No. 417, eff. 10-1-90.
NR 230.662NR 230.662 Effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available. Except as provided in 40 CFR 125.30 to 125.32, any existing point source subject to this subchapter shall achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of BPT:
NR 230.662 Note(1) Within the range 6.0 to 9.0
NR 230.662 HistoryHistory: Cr. Register, September, 1990, No. 417, eff. 10-1-90.
NR 230.663NR 230.663 Effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable. Except as provided in 40 CFR 125.30 to 125.32, any existing point source subject to this subchapter shall achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of BAT:
NR 230.663 HistoryHistory: Cr. Register, September, 1990, No. 417, eff. 10-1-90.
NR 230.664NR 230.664 New source performance standards. Any new source subject to this subchapter shall achieve the following NSPS:
NR 230.664 Note(1) Within the range 6.0 to 9.0
NR 230.664 HistoryHistory: Cr. Register, September, 1990, No. 417, eff. 10-1-90.
NR 230.666NR 230.666 Pretreatment standards for new sources. Except as provided in s. NR 211.13, any new source subject to this subchapter which introduces pollutants into a POTW shall comply with ch. NR 211 and achieve the following PSNS:
NR 230.666 Note(1) When a POTW finds that mass limitations are necessary, the PSNS shall be the limitations set forth in s. NR 230.663 for antimony and chromium.
NR 230.666 HistoryHistory: Cr. Register, September, 1990, No. 417, eff. 10-1-90.
NR 230.667NR 230.667 Effluent limitations representing the degree of effluent reduction attainable by the application of the best conventional pollutant control technology. Except as provided in 40 CFR 125.30 to 125.32, any existing point source subject to this subchapter shall achieve the effluent limitations set forth in s. NR 230.662 for TSS and pH.
NR 230.667 HistoryHistory: Cr. Register, September, 1990, No. 417, eff. 10-1-90.
subch. LXVII of ch. NR 230Subchapter LXVII — Zinc chloride
NR 230.67NR 230.67 Applicability; description of the zinc chloride subcategory. This subchapter applies to the discharge of pollutants to waters of the state and the introduction of pollutants into POTWs from the production of zinc chloride.
NR 230.67 HistoryHistory: Cr. Register, September, 1990, No. 417, eff. 10-1-90.
NR 230.672NR 230.672 Effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available. Except as provided in 40 CFR 125.30 to 125.32, any existing point source subject to this subchapter shall achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of BPT:
NR 230.672 Note(1) Within the range 6.0 to 9.0
NR 230.672 HistoryHistory: Cr. Register, September, 1990, No. 417, eff. 10-1-90.
NR 230.673NR 230.673 Effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable. Except as provided in 40 CFR 125.30 to 125.32, any existing point source subject to this subchapter shall achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of BAT:
NR 230.673 HistoryHistory: Cr. Register, September, 1990, No. 417, eff. 10-1-90.
NR 230.674NR 230.674 New source performance standards. Any new source subject to this subchapter shall achieve the following NSPS:
Down
Loading...
Loading...
Published under s. 35.93, Stats. Updated on the first day of each month. Entire code is always current. The Register date on each page is the date the chapter was last published.