DHS 163.20(8)(b)1.w.w. Discuss the HUD lead safe housing rule requirements for clearance in federally owned or assisted housing. DHS 163.20(8)(b)1.x.x. Compare the requirements of this chapter with the EPA renovation, repair and painting rule under 40 CFR 745 Subparts E and L and the HUD lead safe housing rule under 24 CFR Part 35, Subparts B to M and R. DHS 163.20(8)(b)1.y.y. Explain training and certification requirements for lead investigation activities under this chapter. DHS 163.20(8)(b)2.2. ‘Lead hazard investigation course.’ A lead hazard investigation course shall provide a minimum of 16 training hours only to persons who have successfully completed a lead sampling course and meet the requirements of s. DHS 163.10 for certification. The course shall include lectures, demonstrations, a minimum of 4 hours of hands-on practice and hands-on skills assessment, a course review and a written course test. The course shall provide instruction and materials that address all of the following student learning goals and objectives: DHS 163.20(8)(b)2.a.a. Describe the roles and responsibilities of a lead hazard investigator or risk assessor for clearance, lead hazard screen, lead-safe investigation and risk assessment activities. DHS 163.20(8)(b)2.b.b. Discuss the role of the lead hazard investigator in comparison to the roles of other related lead professionals. DHS 163.20(8)(b)2.c.c. Describe the responsibilities of a lead hazard investigator or risk assessor under the lead-safe registry program. DHS 163.20(8)(b)2.e.e. List the types of background information needed to perform a lead hazard investigation or risk assessment. DHS 163.20(8)(b)2.g.g. Describe how to collect appropriate information on building occupants and any resident children with elevated blood lead levels. DHS 163.20(8)(b)2.j.j. Describe conditions when lead-based paint is considered a hazard in a risk assessment or lead hazard screen versus a lead-safe investigation. DHS 163.20(8)(b)2.L.L. Describe protocols and documented methodologies for performing a visual inspection. DHS 163.20(8)(b)2.m.m. Perform a visual inspection to identify potential sources of lead-based hazards. DHS 163.20(8)(b)2.o.o. Discuss and compare protocols and documented methodologies for lead hazard screens, risk assessments, elevated blood lead investigations and lead-safe investigations. DHS 163.20(8)(b)2.p.p. Conduct a lead hazard screen following protocols and documented methodologies. DHS 163.20(8)(b)2.q.q. Sample for sources of lead exposure other than lead-based paint using protocols and documented methodologies. DHS 163.20(8)(b)2.r.r. Apply current local, state and federal regulations and guidance to interpret lead-based paint and other lead sampling results. DHS 163.20(8)(b)2.s.s. Develop lead hazard control options, including temporary measures, operations and maintenance and abatement activities. DHS 163.20(8)(b)2.t.t. Determine schedules for re-evaluation of temporary lead hazard reduction measures. DHS 163.20(8)(b)2.u.u. Discuss the use of cost/benefit analysis in determining the appropriate role of temporary measures and operations and maintenance activities in lead hazard reduction. DHS 163.20(8)(b)2.y.y. Discuss recordkeeping responsibilities for types of records kept and length of retention. DHS 163.20(8)(b)2.za.za. Discuss federal, state and local statutes, ordinances, rules and regulations that pertain to lead-based paint hazard investigations. DHS 163.20(8)(b)3.3. ‘Lead inspection course.’ A lead inspection course shall provide a minimum of 16 training hours only to persons who have successfully completed the lead sampling course and meet the requirements of s. DHS 163.10 for certification. The course shall include lectures, demonstrations, a minimum of 6 hours of hands-on practice and hands-on skills assessment, a course review and a written course test. The course shall provide instruction and materials that address all of the following student learning goals and objectives: DHS 163.20(8)(b)3.a.a. Describe the role and responsibilities of a lead inspector or risk assessor for clearance, lead inspection and lead-free inspection activities. DHS 163.20(8)(b)3.b.b. Compare the role of the lead inspector to the roles of other lead professionals. DHS 163.20(8)(b)3.d.d. List the types of background information needed to perform a lead inspection or lead-free inspection. DHS 163.20(8)(b)3.e.e. Describe the responsibilities of a lead inspector or risk assessor under the lead-free registry program. DHS 163.20(8)(b)3.f.f. Discuss federal, state and local statutes, ordinances, rules and regulations that pertain to lead-based paint inspections. DHS 163.20(8)(b)3.h.h. Discuss requirements for lead identification and clearance under 24 CFR Part 35, requirements of HUD for notification, evaluation and reduction of lead-based paint hazards in federally owned residential property and housing receiving federal assistance. DHS 163.20(8)(b)3.i.i. Describe major lead-based paint regulations and guidelines of the department and other state, federal and local agencies, including all of the following: department of natural resources; department of agriculture, trade and consumer protection; U.S. occupational safety and health administration; U.S. consumer product safety commission; EPA, HUD and City of Milwaukee. DHS 163.20(8)(b)3.j.j. Compare the methods for conducting lead inspections, partial inspections and lead-free inspections. DHS 163.20(8)(b)3.k.k. Select rooms and components for sampling or testing using protocols and documented methodologies. DHS 163.20(8)(b)3.L.L. Describe how to obtain appropriate background information on property being inspected. DHS 163.20(8)(b)3.s.s. Describe the required elements in an inspection report and a lead-free inspection report. DHS 163.20(8)(b)3.t.t. Describe the recordkeeping responsibilities for the types of records kept and length of retention. DHS 163.20(8)(c)(c) Required topics for lead refresher courses. Each lead refresher training course shall meet the required minimum training hours, shall include lectures, discussion, hands-on instructional activities and skills assessment, and a written course test. Each lead refresher training course shall be based on department-approved curricula and shall provide instruction and materials that address student learning goals and objectives submitted by the training manager and cover all required topics as follows: DHS 163.20(8)(c)1.1. ‘Lead abatement supervisor refresher course.’ A total of 8 training hours to include a review of the curriculum covered in courses required for lead abatement supervisor certification, as appropriate, an overview of current safety practices relating to regulated activities, current federal, state and local statutes, ordinances, rules and regulations relating to regulated activities in general as well as specific information pertaining to lead hazard reduction, and current technologies relating to lead-based paint activities in general and lead-based paint hazard reduction in particular. DHS 163.20(8)(c)2.2. ‘Lead abatement worker refresher course.’ A total of 8 training hours to include a review of the curriculum covered in courses required for lead abatement worker certification, as appropriate, an overview of current safety practices relating to regulated activities, current federal, state and local statutes, ordinances, rules and regulations relating to lead-based paint hazard reduction and current technologies relating to regulated activities in general and lead-based paint hazard reduction and lead-safe work practices in particular. DHS 163.20(8)(c)3.3. ‘Lead hazard investigator refresher course.’ A total of 8 training hours to include a review of the curriculum covered in courses required for lead hazard investigator certification, as appropriate, an overview of current safety practices relating to regulated activities, current federal, state and local statutes, ordinances, rules and regulations relating to lead-based paint and hazard identification and current technologies relating to regulated activities in general and lead-based paint hazard assessment in particular. DHS 163.20(8)(c)4.4. ‘Lead inspector refresher course.’ A total of 8 training hours to include a review of the curriculum covered in courses required for lead inspector certification, as appropriate, an overview of current safety practices relating to regulated activities, current federal, state and local statutes, ordinances, rules and regulations relating to lead-based paint identification and current technologies relating to regulated activities in general and lead-based paint identification in particular. DHS 163.20(8)(c)5.5. ‘Lead project designer refresher course.’ A total of 4 training hours to include a review of the curriculum covered in courses required for lead project designer certification, as appropriate, an overview of current safety practices relating to regulated activities, current federal, state and local statutes, ordinances, rules and regulations relating to lead-based paint and current technologies relating to regulated activities in general and lead hazard reduction in particular. DHS 163.20(8)(c)6.6. ‘Lead risk assessor refresher course.’ A total of 8 training hours to include review of the curriculum covered in courses required for lead risk assessor certification, as appropriate, an overview of current safety practices relating to regulated activities, current federal, state and local statutes, ordinances, rules and regulations relating to regulated activities in general as well as specific information pertaining to risk assessments, and current technologies relating to regulated activities generally and specifically. DHS 163.20(8)(c)7.7. ‘Lead sampling technician refresher course.’ A total of 4 training hours to include a review of the curriculum covered in the course required for lead sampling technician certification, as appropriate, an overview of current safety practices relating to regulated activities, current federal, state and local statutes, ordinances, rules and regulations relating to lead-based paint and current technologies relating to dust, paint and soil sampling in general and clearance in particular. DHS 163.20(8)(c)8.8. ‘Lead-safe renovator refresher course.’ A total of 4 training hours to include a review of the curriculum and work practices covered in the course required for lead-safe renovator certification, an overview of current lead safety practices relating to renovation activities, current federal, state and local statutes, regulations, rules and ordinances relating to lead-based paint and renovation, and current technologies relating to lead-safe work practices for renovation. DHS 163.20(8)(d)(d) Length of training. All required training for any conducted course shall be completed within a continuous 30-day period. DHS 163.20(8)(e)(e) Learning goals and objectives. An accredited training course shall have written learning goals and objectives. DHS 163.20(8)(f)(f) Teaching methods. Instructors shall teach an accredited training course using a variety of teaching methods designed to meet the course learning goals and objectives, including methods that require active participation by the students. DHS 163.20 NoteNote: Examples of participatory teaching methods include: hands-on exercise, questionnaires, problem solving, quizzes, worksheet exercises, focus questions, case studies, brainstorming, on-site visits, learning games, group discussions, role play, writing assignments and personal action plans.
DHS 163.20(8)(g)(g) Quality control plan. The training manager shall develop and implement a quality control plan under s. DHS 163.25 (9) for an accredited training course. DHS 163.20(8)(h)1.1. A written, closed-book course test shall be administered for each initial training course and refresher training course and monitored by the principal instructor or training manager at all times. DHS 163.20(8)(h)2.2. Course tests shall be submitted to the department for review as part of the application for accreditation and shall be resubmitted whenever their content changes. Only course tests that have been approved by the department may be administered. DHS 163.20(8)(h)3.3. A course test shall be developed in accordance with the course test blueprint reflecting the learning goals and objectives of the training course, and shall consist of a minimum of 25 multiple choice questions for every 8 training hours of the course. DHS 163.20(8)(h)4.4. The minimum passing score on a course test shall be correct answers to 70% of the total number of questions, rounded up to the nearest whole number. DHS 163.20(8)(h)5.5. The training provider shall allow a student who fails the course test at least two retakes of the entire course test within 30 days, but may not offer the course test more than once in a given day. A student who fails to pass the course test within 30 days shall retake the course before retaking the course test. DHS 163.20(8)(h)6.6. The training manager shall maintain the validity, security and integrity of the course test to ensure that it accurately evaluates each student’s knowledge and skills. The training manager shall ensure that only the full course test is administered and not a portion of the course test. DHS 163.20(8)(h)7.7. A representative of the training provider designated by the training manager or principal instructor may read a course test to a student in a room separate from other test takers. DHS 163.20(8)(i)(i) Hands-on skills assessment. The principal instructor shall conduct and document a hands-on skills assessment of each student for each learning objective where hands-on instructional activities are performed. A guest instructor who is designated by the training manager for hands-on instruction, may assist the principal instructor in performing the corresponding hands-on skills assessment. DHS 163.20(9)(a)(a) Requirement to verify identification. Before admitting a student into a class, the training manager shall verify the identity of the student by viewing one form of official photo identification. The training provider shall verify that the individual who presents the identification bears a reasonable likeness to the photograph and is at least 18 years of age or will attain 18 years of age no later than 12 months after completing the training. The training manager may delegate verification of identity to an employee of the training program. Any of following forms of photo identification may be accepted: DHS 163.20(9)(a)2.2. Identification card issued by the U.S. military, or a federal, state, local or tribal agency. DHS 163.20(9)(am)(am) Document student identification. The training manager, or employee designated by the training manager, shall record the type of identification examined, the name of the issuing agency, the identification number, the student’s full name as it appears on the identification, and the student’s date of birth. DHS 163.20(9)(b)(b) Requirement to issue training diploma. The training manager shall issue a training diploma to a student when the student completes all course requirements.
/exec_review/admin_code/dhs/110/163
true
administrativecode
/exec_review/admin_code/dhs/110/163/iii/20/8/b/2/u
Department of Health Services (DHS)
Chs. DHS 110-199; Health
administrativecode/DHS 163.20(8)(b)2.u.
administrativecode/DHS 163.20(8)(b)2.u.
section
true
