This is the preview version of the Wisconsin State Legislature site.
Please see http://docs.legis.wisconsin.gov for the production version.
DHS 163.20(8)(a)1.zc.zc. Discuss proper use of personal protection equipment and hygiene practices to protect workers and control the spread of dust.
DHS 163.20(8)(a)1.zd.zd. Explain the role regular and daily cleaning plays in preventing the spread of lead hazards.
DHS 163.20(8)(a)1.ze.ze. Demonstrate proper interior and exterior work area cleaning techniques.
DHS 163.20(8)(a)1.zf.zf. Describe proper carpet cleaning procedures.
DHS 163.20(8)(a)1.zg.zg. Describe the purpose of cleaning verification after final cleanup.
DHS 163.20(8)(a)1.zh.zh. Demonstrate visual inspection for dust and debris after final cleaning.
DHS 163.20(8)(a)1.zi.zi. Demonstrate the full cleaning verification procedure.
DHS 163.20(8)(a)1.zj.zj. Describe dust clearance inspections and how they differ from cleaning verification.
DHS 163.20(8)(a)1.zk.zk. Describe exterior cleanup requirements, including final visual inspection.
DHS 163.20(8)(a)1.zL.zL. Demonstrate proper waste handling.
DHS 163.20(8)(a)1.zm.zm. Discuss federal and state waste disposal regulations.
DHS 163.20(8)(a)1.zn.zn. Describe how long required records must be maintained.
DHS 163.20(8)(a)1.zo.zo. List the records that must be kept on the job site during a renovation activity.
DHS 163.20(8)(a)1.zp.zp. List the records required for pre-renovation education activities.
DHS 163.20(8)(a)1.zq.zq. Describe how to document non-certified worker training.
DHS 163.20(8)(a)1.zr.zr. Describe the records that must be generated and maintained if using a paint test kit.
DHS 163.20(8)(a)1.zs.zs. Describe the post-renovation reporting requirements.
DHS 163.20(8)(a)1.zt.zt. Describe the role of non-certified, on-the-job trained renovation workers.
DHS 163.20(8)(a)1.zu.zu. List and discuss the use of the 7 steps to lead-safe renovation, repair and painting for training uncertified workers.
DHS 163.20(8)(a)2.2. ‘Lead abatement work course.’ A lead abatement work course shall provide a minimum of 8 training hours only to persons who successfully completed a department-approved lead-safe renovation course and meet the requirements of s. DHS 163.10 for certification. The course shall include lectures, demonstrations, a minimum of 6 hours of hands-on practice and hands-on skills assessment, a course review and a written course test. The course shall provide instruction and materials that address all of the following student learning goals and objectives:
DHS 163.20(8)(a)2.a.a. Discuss the role and responsibilities of a lead abatement worker.
DHS 163.20(8)(a)2.b.b. Describe the requirements for training, certification and work practices under ch. DHS 163.
DHS 163.20(8)(a)2.c.c. Discuss employer responsibilities for worker training and protection under 29 CFR 1926.62, lead in construction regulations issued by the U.S. occupational safety and health administration.
DHS 163.20(8)(a)2.d.d. Determine characteristics of a job site that can affect an abatement project.
DHS 163.20(8)(a)2.e.e. Interpret exposure measurements from personal air monitoring samples.
DHS 163.20(8)(a)2.f.f. Discuss general engineering controls used for reducing and containing dust-lead during abatement activities that generate large quantities of dust.
DHS 163.20(8)(a)2.g.g. Describe lead-based paint abatement or hazard reduction work methods.
DHS 163.20(8)(a)2.h.h. Describe restricted or prohibited work practices under s. DHS 163.14 (3) and (4).
DHS 163.20(8)(a)2.i.i. Demonstrate the removal of paint from components using machine sanding, grinding, or planing with HEPA-vacuum exhaust control attachments, and using wet sanding and wet scraping according to documented methodologies.
DHS 163.20(8)(a)2.j.j. Discuss the structural conditions required for successful use of encapsulants.
DHS 163.20(8)(a)2.k.k. Conduct a patch test for determining if an encapsulant will adhere properly.
DHS 163.20(8)(a)2.L.L. Build a mini-containment for high dust engineering control.
DHS 163.20(8)(a)2.m.m. Demonstrate the use of documented methodologies to remove and replace windows.
DHS 163.20(8)(a)2.n.n. Remove components and prepare for proper disposal.
DHS 163.20(8)(a)2.o.o. Perform the final cleaning and waste disposal required after abatement.
DHS 163.20(8)(a)2.p.p. Discuss the advantages and disadvantages of different lead hazard reduction activities.
DHS 163.20(8)(a)2.q.q. Describe exterior abatement activities, including soil-lead abatement options.
DHS 163.20(8)(a)2.r.r. Discuss engineering controls and work practice issues specific to exterior lead-based paint projects.
DHS 163.20(8)(a)2.s.s. Perform a job site preparation and set-up for an exterior abatement project.
DHS 163.20(8)(a)2.t.t. Discuss cleanup after soil and exterior abatement or lead hazard reduction.
DHS 163.20(8)(a)2.u.u. Discuss requirements for pre-cleaning and daily cleaning of abatement work areas, including worker pathways.
DHS 163.20(8)(a)3.3. ‘Lead abatement supervision course.’ A lead abatement supervision course shall provide a minimum of 16 training hours only to persons who have successfully completed lead abatement worker training and meet the requirements of s. DHS 163.10 for certification. The course shall include lectures, demonstrations, hands-on skills assessment, a course review and a written course test. The course shall provide a minimum of 6 hours of hands-on practice and hands-on skills assessment, and instruction and materials that address all of the following student learning goals and objectives:
DHS 163.20(8)(a)3.a.a. Describe the role and responsibilities of a lead abatement supervisor.
DHS 163.20(8)(a)3.b.b. Discuss each of the major responsibility areas necessary to successfully manage lead abatement projects.
DHS 163.20(8)(a)3.c.c. Describe basic supervisory techniques and responsibilities for lead hazard reduction projects.
DHS 163.20(8)(a)3.d.d. Discuss the role the site supervisor plays in community relations and occupant protection.
DHS 163.20(8)(a)3.e.e. Discuss the relation of contract specifications to the actual project.
DHS 163.20(8)(a)3.f.f. Describe the various options for controlling interior, exterior and soil lead hazards.
DHS 163.20(8)(a)3.g.g. Determine appropriate lead hazard reduction methods for interior, exterior and soil hazards.
DHS 163.20(8)(a)3.h.h. Describe the requirements for using restricted lead abatement methods.
DHS 163.20(8)(a)3.i.i. Identify prohibited work practices.
DHS 163.20(8)(a)3.j.j. Describe the requirements for training, certification and work practices under ch. DHS 163.
DHS 163.20(8)(a)3.k.k. Determine when notice to the department is required.
DHS 163.20(8)(a)3.L.L. Complete a work notice form for a lead abatement project.
DHS 163.20(8)(a)3.m.m. Describe lead waste disposal requirements.
DHS 163.20(8)(a)3.n.n. Discuss employer responsibilities for worker training and protection under 29 CFR 1926.62, lead in construction regulations issued by the U.S. occupational safety and health administration.
DHS 163.20(8)(a)3.o.o. Discuss employer responsibilities for worker respiratory protection under 29 CFR 1910.134.
DHS 163.20(8)(a)3.p.p. Discuss requirements for lead hazard reduction measures under 24 CFR Part 35, HUD requirements for notification, evaluation and reduction of lead-based paint hazards in federally owned residential property and housing receiving federal assistance.
DHS 163.20(8)(a)3.q.q. Discuss requirements for revising a project notice.
DHS 163.20(8)(a)3.r.r. Discuss liability and insurance issues as they relate to lead hazard reduction work.
DHS 163.20(8)(a)3.s.s. Interpret risk assessment and inspection reports as they apply to planned lead hazard reduction activities.
DHS 163.20(8)(a)3.t.t. Describe the standards for registered lead-free property and registered lead-safe property registration.
DHS 163.20(8)(a)3.u.u. Recognize common substrate problems that cause paint failure.
DHS 163.20(8)(a)3.v.v. Describe surface preparation techniques for repainting.
DHS 163.20(8)(a)3.w.w. Select appropriate paint types for various conditions and locations in a housing unit.
DHS 163.20(8)(a)3.x.x. List requirements for lead safety when performing lead hazard reduction.
DHS 163.20(8)(a)3.y.y. Determine the appropriate type and amount or number of tools, equipment, supplies, materials and replacement components necessary to perform given lead hazard reduction activities.
DHS 163.20(8)(a)3.z.z. Determine the set-up work required for various lead hazard reduction projects.
DHS 163.20(8)(a)3.za.za. Determine the lead hazard reduction methods most appropriate for various lead hazards.
DHS 163.20(8)(a)3.zb.zb. Determine the cleanup requirements for various lead hazard reduction projects.
DHS 163.20(8)(a)3.zc.zc. Complete a work plan for a given lead-based paint hazard reduction activity.
DHS 163.20(8)(a)3.zd.zd. Write contract specifications for the planned lead-based paint hazard reduction activity.
DHS 163.20(8)(a)3.ze.ze. Explain the purpose of the occupant protection plan.
DHS 163.20(8)(a)3.zf.zf. Complete an occupant protection plan for the planned lead-based paint hazard reduction activity.
DHS 163.20(8)(a)3.zg.zg. List and describe the information required in the abatement report.
DHS 163.20(8)(a)3.zh.zh. Describe the basic requirements for performing post-project pre-clearance.
DHS 163.20(8)(a)3.zi.zi. Perform a post-project visual inspection.
DHS 163.20(8)(a)3.zj.zj. Perform a dust wipe sample using proper protocol.
DHS 163.20(8)(a)3.zk.zk. Complete a laboratory sample analysis request form.
DHS 163.20(8)(a)3.zL.zL. Interpret laboratory analysis dust wipe results.
DHS 163.20(8)(a)3.zm.zm. List the records that must be kept by the employer for lead hazard reduction activities.
DHS 163.20(8)(a)3.zn.zn. Describe the requirements for determining if an encapsulant will adhere properly.
DHS 163.20(8)(a)4.4. ‘Lead project design course.’ A lead project design course shall provide a minimum of 8 training hours only to persons who have successfully completed lead abatement supervisor training and meet the requirements of s. DHS 163.10 for certification. The course shall include lectures, demonstrations, student participation, a course review and a written course test. The course shall provide instruction and materials that address all of the following student learning goals and objectives:
DHS 163.20(8)(a)4.a.a. Describe the major responsibilities of the project designer.
DHS 163.20(8)(a)4.b.b. Explain the uses and values of inspection and risk assessment report to the project designer.
DHS 163.20(8)(a)4.c.c. Identify indications of incomplete or inaccurate inspection and risk assessment reports.
DHS 163.20(8)(a)4.d.d. Identify the elements of a lead-based paint abatement design or project plan and describe a typical way of creating it.
DHS 163.20(8)(a)4.e.e. Explain the importance of writing specifications for a lead hazard reduction project.
DHS 163.20(8)(a)4.f.f. Describe the bidding process and its relationship to a project plan.
Loading...
Loading...
Published under s. 35.93, Stats. Updated on the first day of each month. Entire code is always current. The Register date on each page is the date the chapter was last published.