This is the preview version of the Wisconsin State Legislature site.
Please see http://docs.legis.wisconsin.gov for the production version.
167.33(4)(b)8. 8. Whenever possible, the person operating a snowmobile or an all-terrain vehicle within a ski area during the hours in which a lift is being operated shall give skiers the right-of-way.
167.33(4)(c) (c) Lift inspections. Annually, a ski area operator shall have all of the lifts located in its ski area inspected by a qualified lift inspector to determine whether the lift is in compliance with the rules promulgated by the department of safety and professional services.
167.33(4)(d) (d) Lift inspectors. In order to be a qualified lift inspector for purposes of par. (c), an individual shall be either or both of the following:
167.33(4)(d)1. 1. An individual authorized by the department of safety and professional services to make inspections of lifts pursuant to ch. 101.
167.33(4)(d)2. 2. An individual who has knowledge of the requirements of the rules specified in par. (c) and of the design and operation of lifts and who has one of the following:
167.33(4)(d)2.a. a. A degree of engineering from a recognized university.
167.33(4)(d)2.b. b. Experience as an inspector of lifts for an insurance company that has provided liability insurance coverage to any ski area.
167.33(5) (5) Duties of individuals engaged in alpine sports.
167.33(5)(a) (a) Safety rules; skiing and sledding. Each individual engaged in skiing or sledding at a ski area has a duty to do all the following:
167.33(5)(a)1. 1. Obey all posted warnings and signs.
167.33(5)(a)2. 2. Keep off of closed trails and out of closed areas.
167.33(5)(a)3. 3. Know the range of his or her ability and engage in skiing or sledding within that ability.
167.33(5)(a)4. 4. Assess the difficulty of the trails and terrains that are open to skiing or sledding.
167.33(5)(a)5. 5. Maintain control of his or her speed and direction.
167.33(5)(a)6. 6. Comply with any posted limits that are imposed on the number of passengers or on the amount of weight of the sled or other sledding device while it is being ridden.
167.33(5)(a)7. 7. Be able to stop or avoid other individuals or objects.
167.33(5)(a)8. 8. Yield to other individuals engaged in skiing or sledding who are ahead or who are down the slope.
167.33(5)(a)9. 9. Not stop at a point that will result in the individual obstructing a trail or not being visible from above.
167.33(5)(a)10. 10. Yield to other individuals engaged in skiing or sledding who are uphill when starting downhill or merging onto a trail.
167.33(5)(a)11. 11. Be able to safely board, ride, and deboard any lift serving an area open to skiing or sledding.
167.33(5)(a)12. 12. Board and deboard a lift only at designated sites.
167.33(5)(a)13. 13. If involved in a collision with another participant in an alpine sport that results in injury or death, not leave the vicinity of the collision before giving his or her name and current address to an employee of the ski area operator or a member of the ski patrol, except for the purpose of securing aid for a person injured in the collision. A person who leaves the scene of the collision for the purpose of securing aid shall give his or her name and current address after securing the aid.
167.33(5)(b) (b) Safety rules; tubing. Each individual engaged in tubing at a ski area has a duty to do all of the following:
167.33(5)(b)1. 1. Obey all posted signs and warnings.
167.33(5)(b)2. 2. Keep out of closed areas.
167.33(5)(b)3. 3. Know the range of his or her ability and engage in tubing within that ability.
167.33(5)(b)4. 4. Assess the difficulty of terrain that is open to tubing.
167.33(5)(b)5. 5. Maintain control of his or her speed and direction.
167.33(5)(b)6. 6. Comply with any posted limits that are imposed on the number of passengers or on the amount of weight of the tube or other tubing device while it is being ridden.
167.33(5)(b)7. 7. Be able to safely board, ride, and deboard a lift serving an area open to tubing.
167.33(5)(b)8. 8. Board and deboard a lift only at designated sites.
167.33(5)(b)9. 9. Yield to other individuals engaged in tubing who are ahead or who are down the slope.
167.33(5)(b)10. 10. Look uphill and yield to oncoming tubes before leaving the bottom of the hill at the end of a run.
167.33(5)(b)11. 11. If involved in a collision with another participant in an alpine sport that results in injury or death, not leave the vicinity of the collision before giving his or her name and current address to an employee of the ski area operator or a member of the ski patrol, except for the purpose of securing aid for a person injured in the collision. A person who leaves the scene of the collision for the purpose of securing aid shall give his or her name and current address after securing the aid.
167.33(5)(c) (c) Safety rules; biking. Each individual engaged in biking at a ski area has a duty to do all the following:
167.33(5)(c)1. 1. Obey all posted warnings and signs.
167.33(5)(c)2. 2. Keep out of closed areas.
167.33(5)(c)3. 3. Know the range of his or her ability and engage in biking within that ability.
167.33(5)(c)4. 4. Assess the difficulty of the trails and terrains, including natural and man-made features, that are open to biking. Where possible, walk the trail or features prior to biking.
167.33(5)(c)5. 5. Maintain control of his or her speed and direction.
167.33(5)(c)6. 6. Comply with any posted limits that are imposed on the type of bike or other equipment that may be ridden on a trail or portion of the ski area.
167.33(5)(c)7. 7. Be able to stop or avoid other individuals or objects.
167.33(5)(c)8. 8. Yield to other individuals engaged in biking who are ahead or who are down the slope.
167.33(5)(c)9. 9. Be able to safely board, ride, and deboard any lift serving an area open to biking.
167.33(5)(c)10. 10. Board and deboard a lift only at designated sites.
167.33(5)(c)11. 11. Look uphill and yield to oncoming bikes before leaving the bottom of the hill at the end of the run and upon entering a trail or slope.
167.33(5)(c)12. 12. If involved in a collision with another participant in an alpine sport that results in injury or death, remain in the vicinity of the collision until he or she gives his or her name and current address to an employee of the ski area operator or a member of the bike patrol, except to secure aid for a person injured in the collision. A person who leaves the vicinity in order to secure aid shall provide his or her name and current address after securing the aid.
167.33 History History: 2011 a. 199; 2013 a. 165 s. 115; 2015 a. 168; 2017 a. 364 s. 48; 2021 a. 239.
167.33 Annotation Codify This: Exculpatory Contracts in Wisconsin Recreational Businesses. Nold. 101 MLR 573 (2017).
167.33 Annotation The Exculpatory Contract and Public Policy. Anzivino. 102 MLR 747 (2019).
167.35 167.35 Fire safety performance standards for cigarettes.
167.35(1)(1)Definitions. In this section:
167.35(1)(a) (a) “Cigarette" means any roll of tobacco wrapped in paper or in any substance other than tobacco.
167.35(1)(b) (b) “Department" means the department of safety and professional services unless the context requires otherwise.
167.35(1)(c) (c) “Direct marketer" has the meaning given in s. 139.30 (2n).
167.35(1)(d) (d) “Distributor" has the meaning given in s. 139.30 (3).
167.35(1)(e) (e) “Jobber" has the meaning given in s. 139.30 (6).
167.35(1)(f) (f) “Manufacturer" means any of the following:
167.35(1)(f)1. 1. Any person who manufactures or otherwise produces cigarettes anywhere or causes cigarettes to be manufactured or produced anywhere, if the person intends that the cigarettes are to be sold in this state, including cigarettes that are sold in the United States through an importer.
167.35(1)(f)2. 2. The first purchaser anywhere that intends to resell in the United States cigarettes that are manufactured anywhere, if the original manufacturer or producer did not intend that the cigarettes be sold in the United States.
167.35(1)(f)3. 3. Any entity that becomes a successor to a person described in subd. 1. or a purchaser described in subd. 2.
167.35(1)(f)4. 4. Any person who owns an automated roll-your-own machine that is used to make cigarettes, not including an individual who owns a roll-your-own machine and uses the machine in his or her home solely to make cigarettes for his or her personal use or for the use of other individuals who live in his or her home.
167.35(1)(g) (g) “Repeatability" means the range of values within which the repeat results of cigarette test trials from a single laboratory will fall 95 percent of the time.
167.35(1)(h) (h) “Retailer" has the meaning given in s. 134.66 (1) (g).
167.35(1)(i) (i) “Sell" or “sale" has the meaning given in s. 139.30 (12).
167.35(2) (2) Certification filed by manufacturers.
167.35(2)(a) (a) Each manufacturer that sells or offers to sell cigarettes in this state shall file a written certification with the department, certifying that each type of cigarette listed in the certification has been tested in accordance with sub. (3) and complies with the applicable fire safety performance standard under sub. (3).
167.35(2)(b) (b) For each type of cigarette listed in the certification, all of the following information shall be included in the certification:
167.35(2)(b)1. 1. The brand or trade name that appears on the package.
167.35(2)(b)2. 2. The style of the cigarette, such as light or ultra-light.
167.35(2)(b)3. 3. The length in millimeters.
167.35(2)(b)4. 4. The circumference in millimeters.
167.35(2)(b)5. 5. Any flavor description for the cigarette.
167.35(2)(b)6. 6. Whether the cigarette is filter or nonfilter.
167.35(2)(b)7. 7. The type of individual container in which the cigarette is packaged, such as a soft pack or a box.
167.35(2)(b)8. 8. A description of the marking required under sub. (4).
167.35(2)(b)9. 9. The name, address, and telephone number of the laboratory conducting the testing of the cigarette as required under sub. (3), if the laboratory is not owned and operated by the manufacturer of the cigarette.
167.35(2)(b)10. 10. The date on which the testing required under sub. (3) occurred.
167.35(2)(c) (c) Upon filing a certification under par. (a), a manufacturer shall provide a copy of the certification to each distributor, jobber, or direct marketer that purchases from the manufacturer cigarettes that are the subject of the certification. Each manufacturer shall also provide to each distributor, jobber, and direct marketer sufficient copies of an illustration of the package marking required under sub. (4) to be given to each retailer to whom the distributor, jobber, or direct marketer sells cigarettes.
167.35(2)(d) (d) Each manufacturer shall file the certification under par. (a) with the department every 3 years.
167.35(2)(e) (e) The department shall promptly forward a copy of each certification it receives under par. (a) to the attorney general.
167.35(2)(f) (f) Each manufacturer shall pay to the department a fee of $1,000 for each brand family of cigarette listed in each certification filed with the department under par. (a). The fee shall apply to all cigarettes within the brand family and shall include any new cigarette that is included in the 3-year certification period for which the fee is paid. The manufacturer shall pay the fee upon filing each certification for a new brand family.
167.35(2)(g) (g) If a manufacturer has certified a type of cigarette pursuant to this subsection, and makes any change after the certification to that type of cigarette that is likely to alter its compliance with the applicable fire safety performance standard, no person may offer for sale or sell that type of cigarette in this state unless the manufacturer retests the cigarette in accordance with the applicable testing method under sub. (3) (a) or (d) and maintains the reports of that testing as required under sub. (3) (f).
167.35(3) (3) Test methods; performance standards.
167.35(3)(a) (a) Method of testing. For purposes of this section, testing of cigarettes conducted by a manufacturer or conducted or sponsored by the state shall meet all of the following requirements:
167.35(3)(a)1. 1. The testing shall be conducted in accordance with the standard test method for measuring the ignition strength of cigarettes established by ASTM International standard E2187-04. The department may adopt a substitute test method that is different from the standard test method, if the department finds that the substitute test method does not result in a change in the percentage of full-length burns exhibited by any tested cigarette when compared to the percentage of full-length burns the same cigarette would exhibit when tested in accordance with the standard test method.
167.35(3)(a)2. 2. The testing shall be conducted on 10 layers of filter paper.
167.35(3)(a)3. 3. The fire safety performance standard under this subsection shall be applied only to a complete test trial, which shall consist of 40 replicate tests for each cigarette tested.
167.35(3)(a)4. 4. Each laboratory conducting the testing shall implement a quality control and quality assurance program that meets the requirements under par. (b) and that includes a procedure that will determine the repeatability of the results from the testing. The repeatability value may not be greater than 0.19.
Loading...
Loading...
2021-22 Wisconsin Statutes updated through 2023 Wis. Act 71 and through all Supreme Court and Controlled Substances Board Orders filed before and in effect on February 14, 2024. Published and certified under s. 35.18. Changes effective after February 14, 2024, are designated by NOTES. (Published 2-14-24)