Chapter 101

101.145(3)(a) (a) The owner of a residential building shall install any smoke detector required under this section according to the directions and specifications of the manufacturer of the smoke detector.

101.145(3)(b) (b) The owner of a residential building shall maintain any such smoke detector that is located in a common area of that residential building.

101.145(3)(c) (c) The occupant of a unit in a residential building shall maintain any smoke detector in that unit, except that if an occupant who is not an owner, or a state, county, city, village or town officer, agent or employee charged under statute or municipal ordinance with powers or duties involving inspection of real or personal property, gives written notice to the owner that a smoke detector in the unit is not functional the owner shall provide, within 5 days after receipt of that notice, any maintenance necessary to make that smoke detector functional.

101.145(4) (4) Requirement. The owner of a residential building the initial construction of which is commenced before, on or after May 23, 1978, shall install and maintain a functional smoke detector in the basement and at the head of any stairway on each floor level of the building and shall install a functional smoke detector either in each sleeping area of each unit or elsewhere in the unit within 6 feet of each sleeping area and not in a kitchen.

101.145(5) (5) Penalty. Whoever violates this section shall forfeit to the state not more than $50 for each day of violation.

101.145(6) (6) Department inspection and orders. The department may inspect all residential buildings, except the interior of private dwellings, as may be necessary to ensure compliance with this section. The department may inspect the interior of private dwellings at the request of the owner or renter as may be necessary to ensure compliance with this section. The department may issue orders as may be necessary to ensure compliance with this section.

101.145 History History: 1977 c. 388; 1983 a. 189; 1987 a. 376; 1989 a. 109; 2007 a. 205; 2011 a. 146.

101.1472 101.1472 Contractor regulation.

101.1472(1) (1) In this section:

101.1472(1)(a) (a) “Construction work” means construction, renovation, improvements, remodeling, installations, alterations, repairs, or demolition activities.

101.1472(1)(b) (b) “License” means a license, a permit, or a certificate of certification or registration.

101.1472(2) (2) The department may not promulgate or enforce any rule that requires that a person who is engaged, or who offers to be engaged, in a business to do construction work hold a license issued under this chapter or ch. 145 unless the rule relates to a license specifically required by this chapter or ch. 145.

101.1472 History History: 2013 a. 20.

101.148 101.148 Contractor notices.

101.148(1) (1) Definitions. In this section:

101.148(1)(a) (a) “Consumer” means a person who enters into a written or oral contract with a contractor to construct or remodel a dwelling.

101.148(1)(b) (b) “Contractor” means a person who enters into a written or oral contract with a consumer to construct or remodel a dwelling.

101.148(1)(c) (c) “Deliver” means any of the following:

101.148(1)(c)1. 1. Depositing the document or written notice in the U.S. mail or with a commercial delivery service, addressed to the applicable person.

101.148(1)(c)2. 2. Giving the document or written notice personally to the applicable person.

101.148(1)(d) (d) “Dwelling” means any premises or portion of a premises that is used as a home or a place of residence and that part of the lot or site on which the dwelling is situated that is devoted to residential use. “Dwelling” includes other existing structures on the immediate residential premises such as driveways, sidewalks, swimming pools, terraces, patios, fences, porches, garages, and basements.

101.148(1)(e) (e) “Remodel” means to alter or reconstruct a dwelling. “Remodel” does not include maintenance or repair work.

101.148(2) (2) Notice required at time of contracting.

101.148(2)(a) (a) Before entering into a written contract to construct or remodel a dwelling, or, if the parties enter into an oral contract, as soon as reasonably possible, but before commencing any work to construct or remodel a dwelling, the contractor shall deliver to the consumer a copy of the brochure prepared under s. 895.07 (13) and a notice worded substantially as follows:

NOTICE CONCERNING CONSTRUCTION DEFECTS

Wisconsin law contains important requirements you must follow before you may file a lawsuit for defective construction against the contractor who constructed your dwelling or completed your remodeling project or against a window or door supplier or manufacturer. Section 895.07 (2) and (3) of the Wisconsin statutes requires you to deliver to the contractor a written notice of any construction conditions you allege are defective before you file your lawsuit, and you must provide your contractor or window or door supplier the opportunity to make an offer to repair or remedy the alleged construction defects. You are not obligated to accept any offer made by the contractor or window or door supplier. All parties are bound by applicable warranty provisions.

101.148(2)(b) (b) The notice required under par. (a) shall be conspicuous and in writing and may be included within the contract between the contractor and the consumer.

101.148 History History: 2005 a. 201.

101.149 101.149 Carbon monoxide detectors.

101.149(1) (1) Definitions. In this section:

101.149(1)(ag) (ag) “Bed and breakfast establishment” has the meaning given in s. 97.01 (1g).

101.149(1)(am) (am) “Carbon monoxide detector” means an electronic or battery-operated device or system that sounds an alarm when an unsafe level of carbon monoxide is in the air.

101.149(1)(as) (as) “Fuel-burning appliance” means a device that burns fossil fuel or carbon-based fuel and that produces carbon monoxide as a combustion by-product.

101.149(1)(b) (b) “Residential building” means a tourist rooming house, a bed and breakfast establishment, or any public building that is used for sleeping or lodging purposes. “Residential building” does not include a hospital or nursing home.

101.149(1)(c) (c) “Sleeping area” has the meaning given in s. 101.145 (1) (b).

101.149(1)(cm) (cm) “Tourist rooming house” has the meaning given in s. 97.01 (15k).

101.149(1)(d) (d) “Unit” means a part of a residential building that is occupied by one or more persons as a home, residence, or sleeping place.

101.149(2) (2) Installation requirements.

101.149(2)(ac) (ac) Carbon monoxide detectors required. Except as provided in sub. (5), the owner of a residential building shall provide carbon monoxide detectors at the locations specified in par. (ax) as required under pars. (ag) to (at).

101.149(2)(ag) (ag) Fuel-burning appliances. Carbon monoxide detectors shall be provided in units that contain a fuel-burning appliance.

101.149(2)(aL) (aL) Forced-air furnaces. Carbon monoxide detectors shall be provided in units served by a fuel-burning, forced-air furnace, except that carbon monoxide detectors are not required in a unit if a carbon monoxide detector is provided in the first room or area served by each main duct leaving the furnace and one of the following is satisfied:

101.149(2)(aL)1. 1. The carbon monoxide alarm signals are automatically transmitted to all units served by the furnace and to a designated location at a facility staffed by trained personnel on a continuous basis where alarm and supervisory signals are monitored and facilities are provided for notification of the fire department.

101.149(2)(aL)2. 2. In addition to the first room or area served by each main duct leaving the furnace, a carbon monoxide detector is installed in every 4th unit on the same floor as that first room or area.

101.149(2)(ap) (ap) Fuel-burning appliances outside of units. Carbon monoxide detectors shall be provided in units located in residential buildings that contain fuel-burning appliances, except as follows:

101.149(2)(ap)1. 1. Carbon monoxide detectors are not required in units where there are no openings between the fuel-burning appliance and the unit through which carbon monoxide can get into the unit.

101.149(2)(ap)2. 2. Carbon monoxide detectors are not required in units where a carbon monoxide detector is provided in one of the following locations:

101.149(2)(ap)2.a. a. Between the fuel-burning appliance and the unit.

101.149(2)(ap)2.b. b. On the ceiling of the room containing the fuel-burning appliance.

101.149(2)(at) (at) Private garages. Carbon monoxide detectors shall be provided in units in buildings with attached private garages, except as follows:

101.149(2)(at)1. 1. Carbon monoxide detectors are not required where there are no openings between the private garage and the unit through which carbon monoxide can get into the unit.

101.149(2)(at)2. 2. Carbon monoxide detectors are not required in units located more than one story above or below the private garage.

101.149(2)(at)3. 3. Carbon monoxide detectors are not required where the private garage connects to the building through an open-ended corridor.

101.149(2)(at)4. 4. Where carbon monoxide detectors are provided between openings to the private garage and units, carbon monoxide detectors are not required in the units.

101.149(2)(at)5. 5. Carbon monoxide detectors are not required where the private garage has openings designed to provide natural ventilation, or is mechanically ventilated, in accordance with rules for natural and mechanical ventilation in public parking garages promulgated by the department.

101.149(2)(ax) (ax) Locations. If required under pars. (ag) to (at), carbon monoxide detectors shall be installed in the following locations:

101.149(2)(ax)1. 1. ‘Units.’ In units, outside of each separate sleeping area in the immediate vicinity of the sleeping rooms.

101.149(2)(ax)2. 2. ‘Sleeping rooms.’ In sleeping rooms, if a fuel-burning appliance is located within the sleeping room or its attached bathroom.

101.149(2)(d) (d) Certification. Any carbon monoxide detector that bears an Underwriters Laboratories, Inc., listing mark or similar mark from an independent product safety certification organization satisfies the requirements of this subsection.

101.149(2)(e) (e) Manufacturer directions and specifications. The owner shall install every carbon monoxide detector required by this subsection according to the directions and specifications of the manufacturer of the carbon monoxide detector.

101.149(3) (3) Maintenance requirements.

101.149(3)(a) (a) The owner of a residential building shall reasonably maintain every carbon monoxide detector in the residential building in the manner specified in the instructions for the carbon monoxide detector.

101.149(3)(am) (am) If any person certified under s. 101.12 (4) or 101.14 (4r) gives written notice to an owner of a residential building that a carbon monoxide detector in the residential building is not functional, the owner shall provide, within 5 days after receipt of that notice, any maintenance necessary to make that carbon monoxide detector functional.

101.149(3)(b) (b) An occupant of a unit in a residential building may give the owner of the residential building written notice that a carbon monoxide detector in the residential building is not functional or has been removed by a person other than the occupant. The owner of the residential building shall repair or replace the nonfunctional or missing carbon monoxide detector within 5 days after receipt of the notice.

101.149(3)(c) (c) The owner of a residential building is not liable for damages resulting from any of the following:

101.149(3)(c)1. 1. A false alarm from a carbon monoxide detector if the carbon monoxide detector was reasonably maintained by the owner of the residential building.

101.149(3)(c)2. 2. The failure of a carbon monoxide detector to operate properly if that failure was the result of tampering with, or removal or destruction of, the carbon monoxide detector by a person other than the owner or the result of a faulty detector that was reasonably maintained by the owner as required under par. (a).

101.149(4) (4) Tampering prohibited. No person may tamper with, remove, destroy, disconnect, or remove batteries from an installed carbon monoxide detector, except in the course of inspection, maintenance, or replacement of the detector.

101.149(5) (5) Exception. Subsections (2) and (3) do not apply to the owner of a residential building if all of the fuel-burning appliances in the residential building have sealed combustion units that are covered by the manufacturer’s warranty against defects.

101.149(6) (6) Rules. The department shall promulgate rules establishing a procedure under which the owner of a residential building may apply to the department for a waiver of the requirements under sub. (2).

101.149(7) (7) Inspection. To ensure compliance with subs. (2) and (3), the department or a person certified under s. 101.12 (4) or 101.14 (4r) may inspect the common area of residential buildings and may inspect a unit within such buildings at the request of the owner or occupant of the unit to be inspected.

101.149(8) (8) Penalties.

101.149(8)(a) (a) If the department of safety and professional services or the department of agriculture, trade and consumer protection determines after an inspection of a building under this section or s. 97.625 (1g) that the owner of the building has violated sub. (2) or (3), the respective department shall issue an order requiring the person to correct the violation within 5 days or within such shorter period as the respective department determines is necessary to protect public health and safety. If the person does not correct the violation within the time required, he or she shall forfeit $50 for each day of violation occurring after the date on which the respective department finds that the violation was not corrected.

101.149(8)(b) (b) If a person is charged with more than one violation of sub. (2) or (3) arising out of an inspection of a building owned by that person, those violations shall be counted as a single violation for the purpose of determining the amount of a forfeiture under par. (a).

101.149(8)(c) (c) Whoever violates sub. (4) is subject to the following penalties:

101.149(8)(c)1. 1. For a first offense, the person may be fined not more than $10,000 or imprisoned for not more than 9 months, or both.

101.149(8)(c)2. 2. For a 2nd or subsequent offense, the person is guilty of a Class I felony.

101.149 History History: 2007 a. 20 s. 9121 (6) (a); 2007 a. 205; 2011 a. 32; 2013 a. 166 s. 77; 2015 a. 55; 2017 a. 330.

101.149 Cross-reference Cross-reference: See also ss. SPS 321.095, 362.0915, and 366.1011 (2), Wis. adm. code.

101.15 101.15 Mines, tunnels, quarries and pits.

101.15(1) (1) If any shaft or workings of a mine, or any tunnel, trench, caisson, quarry, or gravel or sand pit is being operated or used in violation of the safety orders of the department applicable thereto, the owner or operator upon receiving notice of such violation from the department shall immediately cease such operation or use. The operation or use of such shaft or workings of a mine, or of such tunnel, trench, caisson, quarry or gravel or sand pit, shall not be resumed until such safety orders have been complied with.

101.15(2) (2) 

101.15(2)(a) (a) For the purpose of this section:

101.15(2)(a)1. 1. “Excavation” or “workings” means any or all parts of a mine excavated or being excavated, including shafts, tunnels, drifts, cross cuts, raises, winzes, stopes and all other working places in a mine.

101.15(2)(a)2. 2. “Mineral” means a product recognized by standard authorities as mineral, whether metalliferous or nonmetalliferous.

101.15(2)(a)3. 3. “Shaft” means an opening made for mining minerals, for hoisting and lowering persons or material, or for ventilating underground workings.

101.15(2)(b) (b) No excavation of a shaft may be commenced unless a permit is first issued therefor by the department. Permits for such excavation shall be issued upon fee payment and application filed with the department, if the department is satisfied that the shaft or the excavation and workings will be in compliance with the safety orders adopted by the department and applicable thereto. Application shall be made upon forms prescribed by the department and shall be furnished upon request.

101.15(2)(c) (c) Paragraph (b) does not apply to shafts which will be less than 50 feet in depth wherein persons are not employed, or which are not equipped with power driven hoists used for hoisting persons in and out of the shafts, or which are not covered with a flammable building.

101.15(2)(d) (d) The department may:

101.15(2)(d)1. 1. Employ additional mining inspectors, each of whom shall have experience in mining or be a graduate of a recognized college with a degree of mining engineering.