December 8, 2023 - Introduced by Senators Roys, Taylor, Hesselbein, Larson and Smith, cosponsored by Representatives Baldeh, Andraca, Bare, Considine, Stubbs, Conley, Moore Omokunde, Emerson, Jacobson, Palmeri, Subeck, Joers, Neubauer, Ohnstad, Clancy, J. Anderson, Shelton, Sinicki, Vining, Madison and Drake. Referred to Committee on Natural Resources and Energy.
SB777,,22An Act to create 101.02 (7r) (h) and 101.028 of the statutes; relating to: creating a stretch energy code. SB777,,33Analysis by the Legislative Reference Bureau This bill requires the Department of Safety and Professional Services to create a stretch energy code working group, which is required to establish a stretch energy code.
Under current law, DSPS promulgates rules setting design requirements for construction and equipment for the purpose of energy conservation in public buildings and places of employment (commonly known as the “energy conservation code”). In general, a local unit of government is prohibited from enacting or enforcing an ordinance establishing minimum standards for constructing, altering, or adding to public buildings or buildings that are places of employment unless that ordinance strictly conforms to applicable DSPS rules.
The bill requires the stretch energy code working group to establish the stretch energy code, which must have separate components for commercial and residential buildings and must establish minimum energy efficiency requirements that may exceed the requirements of the energy conservation code. The bill provides that any county, city, village, or town may by ordinance adopt the residential or commercial components of the stretch energy code, or both, and make the adopted requirements of the stretch energy code applicable within the county, city, village, or town.
For further information see the state fiscal estimate, which will be printed as an appendix to this bill.
SB777,,44The people of the state of Wisconsin, represented in senate and assembly, do enact as follows: SB777,15Section 1. 101.02 (7r) (h) of the statutes is created to read: SB777,,66101.02 (7r) (h) Notwithstanding par. (a), a county, city, village, or town may enact and enforce an ordinance establishing an energy code that is stricter than rules promulgated by the department under s. 101.027 (2) if the ordinance is in strict conformity with the stretch energy code established by the stretch energy code working group under s. 101.028 (2). SB777,27Section 2. 101.028 of the statutes is created to read: SB777,,88101.028 Stretch energy code. (1) The department shall create a stretch energy code working group consisting of the secretary, or his or her designee, and other members appointed by the secretary, or his or her designee, who are any of the following: SB777,,99(a) An employee of the department. SB777,,1010(b) An industry leader in deep clean energy. SB777,,1111(c) A nonprofit leader focused on scaling climate solutions. SB777,,1212(d) A representative from a municipality that has a climate action plan. SB777,,1313(2) No later than December 31, 2023, the stretch energy code working group shall establish the stretch energy code, which shall have separate components for commercial and residential buildings and shall establish minimum energy efficiency requirements that may exceed the minimum energy efficiency requirements established in the energy conservation code under s. 101.027. SB777,,1414(3) A county, city, village, or town may by ordinance adopt the residential or commercial components of the stretch energy code, or both, and make the adopted requirements of the stretch energy code applicable within the county, city, village, or town. SB777,315Section 3. Nonstatutory provisions. SB777,,1616(1) The authorized FTE positions for the department of safety and professional services are increased by 1.0 GPR project position, to be funded from the appropriation under s. 20.165 (1) (a), for the purpose of administering the creation of the stretch energy code under s. 101.028.
