This is the preview version of the Wisconsin State Legislature site.
Please see http://docs.legis.wisconsin.gov for the production version.
SPS 361.33 History History: CR 00-179: cr. Register December 2001 No. 552, eff. 7-1-02; CR 16-094: am., Register April 2018 No. 748 eff. 5-1-18.
SPS 361.35 SPS 361.35Revocation of approval. The department may revoke any approval, issued under chs. SPS 361 to 366, for any false statements or misrepresentation of facts on which the approval was based.
SPS 361.35 History History: CR 00-179: cr. Register December 2001 No. 552, eff. 7-1-02; CR 16-094: am., Register April 2018 No. 748 eff. 5-1-18.
SPS 361.36 SPS 361.36Expiration of plan approval and extension of plan approval.
SPS 361.36(1)(1)Expiration of plan approval.
SPS 361.36(1)(a) (a) Building shell. Except as provided in par. (f) and sub. (2) (b), plan approval by the department or its authorized representative for new buildings and building additions shall expire 2 years after the approval date indicated on the approved building plans if the building shell is not closed in within those 2 years.
SPS 361.36(1)(b) (b) Occupancy. Except as provided in sub. (2), plan approval by the department or its authorized representative for new buildings and building additions shall expire 3 years after the approval date indicated on the approved building plans if the building is not ready for occupancy within those 3 years.
SPS 361.36(1)(c) (c) Alterations. Except as provided in sub. (2), plan approval by the department or its authorized representative for interior building alterations shall expire one year after the approval date indicated on the approved building plans if the alteration work is not completed within that year.
SPS 361.36(1)(d) (d) HVAC construction only. Except as provided in sub. (2), plan approval by the department or its authorized representative for heating, ventilating, or air conditioning construction that does not include any associated building construction shall expire one year after the approval date indicated on the approved plans if the building or building area affected by the plans is not ready for occupancy within that year.
SPS 361.36(1)(e) (e) Fire protection systems only. Except as provided in sub. (2), plan approval by the department or its authorized representative for a fire protection system that does not include any associated building construction shall expire 2 years after the approval date indicated on the approved plans if the building or building area affected by the plans is not ready for occupancy within those 2 years.
SPS 361.36(1)(f) (f) Mausoleums. Except as provided in sub. (2), plan approval by the department or its authorized representative for mausoleums within the scope of s. 440.92 (2) (e), Stats., shall expire 3 years after the date indicated on the approved building plans of the building shell if not closed within those 3 years.
SPS 361.36(1)(g) (g) Bleachers and canopies. Except as provided in sub. (2), plan approval by the department or its authorized representative for bleachers or free standing canopies shall expire 2 years after the approval date on the approved plans of the structure.
SPS 361.36(2) (2) Extension of plan approval.
SPS 361.36(2)(a) (a) Except as provided in par. (b), upon request and payment of the fee specified in ch. SPS 302, the expiration dates in sub. (1) (b) to (g) may be extended provided the request is submitted prior to expiration of the original approval.
SPS 361.36 Note Note: According to s. 66.0413, Stats., the local governmental body or building inspector may order the razing of buildings or portions thereof, where there has been a cessation of normal construction for more than 2 years.
SPS 361.36(2)(b) (b) Upon request to the secretary, the expiration dates in sub. (1) (a) and (b) may be extended at the discretion of the secretary for a one-time, 2-year period provided all of the following:
SPS 361.36(2)(b)1. 1. The approved plan is for multifamily dwelling containing less than 11 dwelling units.
SPS 361.36(2)(b)2. 2. The original plan was submitted for department review prior to January 1, 2011.
SPS 361.36(2)(b)3. 3. The request is submitted prior to expiration of the original approval.
SPS 361.36 Note Note: According to s. 66.0413, Stats., the local governmental body or building inspector may order the razing of buildings or portions thereof, where there has been a cessation of normal construction for more than 2 years.
SPS 361.36 History History: CR 00-179: cr. Register December 2001 No. 552, eff. 7-1-02; CR 06-120: renum. (2) to be (2) (a) and am., cr. (2) (b), Register February 2008 No. 626, eff. 3-1-08; correction in (2) (a) made under s. 13.92 (4) (b) 7., Stats., Register December 2011 No. 672; CR 16-094: am. (1) (f), cr. (1) (g), am. (2) (a), Register April 2018 No. 748 eff. 5-1-18.
SPS 361.37 SPS 361.37Department limitation. A conditional approval of a plan by the department may not be construed as an assumption of any responsibility on the part of the department for the design or construction of the project.
SPS 361.37 History History: CR 00-179: cr. Register December 2001 No. 552, eff. 7-1-02.
SPS 361.39 SPS 361.39Registration of cross connection control assemblies. Cross connection control assemblies to be installed in water-based fire protection systems shall be registered with the department in accordance with ch. SPS 382.
SPS 361.39 History History: CR 02-002: cr. Register April 2003 No. 568, eff. 5-1-03; CR 04-016: am. Register December 2004 No. 588, eff. 1-1-05; correction made under s. 13.92 (4) (b) 7., Stats., Register December 2011 No. 672.
subch. IV of ch. SPS 361 Subchapter IV — Supervision and Inspections
SPS 361.40 SPS 361.40Supervision.
SPS 361.40(1)(1)General.
SPS 361.40(1)(a)(a) Except as provided in par. (b), the proposed construction of a project within the scope of chs. SPS 361 to 366 shall be supervised by one or more Wisconsin registered architects or engineers, except that Wisconsin registered designers may supervise the installation of heating, ventilating and air conditioning systems, fire protection systems, and illumination systems. The person responsible for supervision shall also be responsible for the construction and installation being in substantial compliance with the approved plans and specifications. If the supervising architect, engineer, or designer is confronted with a nonconformance with the code during or at the end of construction, that party, together with the designing architect, engineer, or designer shall effect compliance or shall notify the department of the noncompliance.
SPS 361.40(1)(b)1.1. A project does not require supervision by a Wisconsin registered architect or engineer, if the project qualifies under one of the following conditions:
SPS 361.40(1)(b)1.a. a. The building contains less than 50,000 cubic feet total volume.
SPS 361.40(1)(b)1.b. b. An addition to an existing building does not cause the entire building to contain or exceed a volume of 50,000 cubic feet.
SPS 361.40(1)(b)2. 2. For the purposes of this paragraph, the utilization of fire walls to divide up a building does not create separate buildings.
SPS 361.40(2) (2) Duties. Supervision of construction is a professional service, as distinguished from superintending of construction by a contractor, and means the performance, or the supervision thereof, of reasonable on-the-site observations to determine that the construction is in substantial compliance with the approved plans and specifications.
SPS 361.40(3) (3) Name of supervising architect, engineer or designer.
SPS 361.40(3)(a)(a) Prior to the start of construction, the owner of the building or structure shall designate in writing to the authority that issued plan approval the name and Wisconsin registration number of the architect, engineer or designer retained to supervise construction of the building or structure.
SPS 361.40(3)(b) (b) If the supervising architect, engineer, or designer withdraws from a construction project, the owner of the building or structure shall retain a new supervising professional within 30 days of the date of the withdrawal and provide the authority that issued plan approval the name and Wisconsin registration number of the replacement supervising professional.
SPS 361.40(4) (4) Compliance statement. Prior to initial occupancy of a new building or addition, and prior to final occupancy of an alteration of an existing building, the supervising architect, engineer or designer shall file a written statement with the authority that issued plan approval certifying that, to the best of his or her knowledge and belief, construction of the portion to be occupied has been performed in substantial compliance with the approved plans and specifications. This statement shall be provided on a form prescribed by the department.
SPS 361.40 Note Note: The Department forms required in this chapter are available at the Department's website at www.dsps.wi.gov through links to Division of Industry Services forms.
SPS 361.40 History History: CR 00-179: cr. Register December 2001 No. 552, eff. 7-1-02; CR 01-139: am. (1) (b) 1. a. and b. Register June 2002 No. 558, eff. 7-1-02; CR 04-016: renum. from Comm 61.50 Register December 2004 No. 588, eff. 1-1-05; CR 10-103: am. (1) (a) Register August 2011 No. 668, eff. 9-1-11; correction in (1) (b) 1. made under s. 13.92 (4) (b) 7. Stats., Register August 2011 No. 668; CR 16-094: am. (1) (a), renum. (3) to (3) (a), cr. (3) (b), Register April 2018 No. 748 eff. 5-1-18.
SPS 361.41 SPS 361.41Inspections.
SPS 361.41(1)(1)On-site.
SPS 361.41(1)(a)(a) When required, on-site inspections shall be conducted within 5 business days following a request by the applicant or an authorized representative.
SPS 361.41(1)(b) (b) Construction may proceed if the inspection has not been completed by the end of the fifth business day following the day of notification or as otherwise agreed between the applicant and the municipality or authorized inspection agency.
SPS 361.41(1)(c) (c) On-site inspections shall be conducted by an authorized representative of the department to determine whether or not the construction or installations conform to the conditionally approved plans, the conditional approval letter, and chs. SPS 361 to 366.
SPS 361.41 Note Note: See s. 101.14, Stats., and ch. SPS 314 for requirements relating to fire inspections and fire prevention.
SPS 361.41(2) (2) In-plant.
SPS 361.41(2)(a)(a) General. Manufacturers of manufactured buildings shall contract with the department or an independent inspection agency to conduct in-plant inspections to assure that the manufactured buildings are in compliance with the plans approved by the department. All inspections shall be performed by a certified commercial building inspector.
SPS 361.41(2)(b) (b) Wisconsin insignia for manufactured buildings. Pursuant to s. 101.75, Stats., a Wisconsin insignia shall be installed on a manufactured dwelling unit approved by the department and inspected at the manufacturing plant. Each Wisconsin insignia shall be assigned and affixed to a specific manufactured multifamily dwelling, in the manner approved by the department, before the dwelling is shipped from the manufacturing plant. The serial number shall be located on the manufacturer's data plate.
SPS 361.41(2)(c) (c) Manufacturer's responsibilities.
SPS 361.41(2)(c)1.1. `Insignia records.' The manufacturer shall keep permanent records regarding the handling of all Wisconsin insignias indicating the number of Wisconsin insignias which have been affixed to manufactured buildings, building components, or groups of components; which Wisconsin insignias have been applied to which manufactured building or building component; and the disposition of any damaged or rejected Wisconsin insignias. The records shall be maintained by the manufacturer or by the independent inspection agency for at least 10 years. A copy of the records shall be sent to the department upon request.
SPS 361.41(2)(c)2. 2. `Lost or damaged insignia.'
SPS 361.41(2)(c)2.a.a. If Wisconsin insignias become lost or damaged, the department shall be notified immediately in writing by the manufacturer or dealer.
SPS 361.41(2)(c)2.b. b. If a Wisconsin insignia becomes damaged, the insignia shall be returned to the department with the fee specified in ch. SPS 302 to obtain a new insignia.
SPS 361.41(2)(d) (d) Insignia suspension and revocation.
SPS 361.41(2)(d)1.1. The department may suspend or revoke its approval if it determines that the standards for the construction or manufacture and installation of a manufactured building do not meet chs. SPS 361 to 366, or if such standards are not being enforced as required by this chapter.
SPS 361.41(2)(d)2. 2. Upon suspension or revocation of the approval, no further insignias may be attached to any manufactured building or type of manufactured building with respect to which the approval was suspended or revoked.
SPS 361.41(2)(d)3. 3. Upon suspension or revocation of the approval, all insignias allocated to the manufacturer shall be returned to the department no later than 30 days from the effective date of the suspension or revocation.
SPS 361.41(3) (3) Mausoleum. Within 30 days after receiving written notice from a cemetery authority that the construction or conversion of a mausoleum has been completed, the department or authorized representative shall inspect the mausoleum and provide written notification of violations. Except as provided in s. 157.12 (2) (b), Stats., mausoleum spaces may not be sold prior to approval by the department or its authorized representative.
SPS 361.41 Note Note: Sale of mausoleum spaces is permitted prior to departmental approval in accordance with other requirements of the Department.
SPS 361.41 History History: CR 00-179: cr. Register December 2001 No. 552, eff. 7-1-02; CR 01-139: renum. (2) (e) to be (3) Register June 2002 No. 558, eff. 7-1-02; CR 04-016: renum. from Comm 61.51 Register December 2004 No. 588, eff. 1-1-05; correction in (2) (c) 2. b. made under s. 13.92 (4) (b) 7., Stats., Register December 2011 No. 672; CR 16-094: renum. (1) to (1) (c) and am., cr. (1) (a), (b), am. (2) (d) 1., (3), Register April 2018 No. 748 eff. 5-1-18.
subch. V of ch. SPS 361 Subchapter V — Approval and Inspection of Modular Multifamily Dwellings and their Components
SPS 361.45 SPS 361.45Modular multifamily dwelling scope. This subchapter shall govern the design, manufacture, installation, and inspection of modular multifamily housing, modular multifamily building systems, and the building system components displaying the Wisconsin insignia.
SPS 361.45 History History: CR 16-094: cr., Register April 2018 No. 748 eff. 5-1-18.
SPS 361.46 SPS 361.46Manufacture, sale, and installation of dwellings.
SPS 361.46(1)(1)Manufacture and sale. No modular multifamily housing, modular multifamily building system and the building system components subject to this subchapter may be manufactured for use, sold for initial use or installed in this state unless it is approved by the department and it bears the Wisconsin insignia issued in accordance with s. SPS 361.47 (6).
SPS 361.46(2) (2) Compliance assurance program. A manufacturer of a modular multifamily dwelling shall establish a compliance assurance program to ensure that materials, production, and site operations conform to chs. SPS 361 to 366 and approved construction documents. The compliance assurance program shall be independent from the production of the unit. The compliance assurance program shall include all of the following:
SPS 361.46(2)(a) (a) Inspection and testing procedures that include inspection and testing frequency, processes, and criteria for accepting and rejecting materials and products.
SPS 361.46(2)(b) (b) A flow chart, plant layout, or other schematic plan or document illustrating and describing the process for manufacturing modular multifamily dwellings, including locations and check points where mandatory inspections will occur.
SPS 361.46(2)(c) (c) Procedures for protecting materials, supplies, and other items used in the production process from damage and deterioration.
SPS 361.46(2)(d) (d) Procedures for segregating and disposing of rejected materials and products, including a record documenting the authority to reject defective work without conflict from the production department.
SPS 361.46(2)(e) (e) Procedures for calibrating, testing, and inspecting equipment used in the production process.
SPS 361.46(2)(f) (f) Procedures for final inspection, identification, and labeling of finished modular multifamily housing, modular multifamily building systems, and the building system components, including a system for issuing and maintaining records of serial numbers on units and components.
SPS 361.46(2)(g) (g) Procedures for handling, storing, and protecting all finished modular multifamily housing, modular multifamily building systems, and the building system components at the manufacturing plant or other storage facility.
SPS 361.46(2)(h) (h) Procedures and methods for storing and maintaining access to manufacturing records.
SPS 361.46(2)(i) (i) An audit, monitoring, or similar evaluation system to assess the effectiveness of the compliance assurance program and the manufacturing process.
SPS 361.46(3) (3) Installation. The manufacturer shall obtain building plan review and approval, in accordance with this subchapter, for a modular multifamily dwelling before any on-site construction within the scope of chs. SPS 361 to 366 is commenced.
SPS 361.46 History History: CR 16-094: cr., Register April 2018 No. 748 eff. 5-1-18.
SPS 361.47 SPS 361.47Approval procedures.
SPS 361.47(1) (1)Application for approval.
SPS 361.47(1)(a)(a) An application for approval of any modular multifamily housing, modular multifamily building system, and the building system components shall be submitted to the department on a form required by the department, along with the appropriate fees in accordance with s. SPS 302.34 (5).
SPS 361.47 Note Note: An application form is available from the department's Division of Industry Services website at dsps.wi.gov.
SPS 361.47(1)(b) (b) The department shall review and make a determination on an application for approval of a modular multifamily housing, modular multifamily building system, and the components of the building system within 30 days.
SPS 361.47(2) (2) Approval of plans and specifications for modular multifamily building systems and building system components.
SPS 361.47(2)(a)(a) Approval of building systems. Four complete sets of building, structural, and HVAC plans, including elevations, sections, and details, and one set of specifications and calculations shall be submitted to the department on behalf of the manufacturer for examination and approval.
SPS 361.47 Note Note: Plumbing plans submission criteria can be found in ch. SPS 384.
SPS 361.47(2)(b) (b) Approval of building components. Four complete sets of plans and specifications for manufactured building components shall be submitted to the department on behalf of the manufacturer for examination and approval.
SPS 361.47(3) (3) Notification of approval or denial of plans and specifications.
Loading...
Loading...
Published under s. 35.93, Stats. Updated on the first day of each month. Entire code is always current. The Register date on each page is the date the chapter was last published.