This is the preview version of the Wisconsin State Legislature site.
Please see http://docs.legis.wisconsin.gov for the production version.
SPS 345.11(4)(b) (b) Where a provision of this chapter prescribes a general requirement and another provision of this chapter prescribes a specific or more detailed requirement regarding the same subject, the specific or more detailed requirement shall govern, except as provided in par. (a).
SPS 345.11(4)(c) (c) Where different sections of this chapter specify conflicting requirements, the most restrictive requirement, as determined by the department, shall govern, except as provided in pars. (a) and (b).
SPS 345.11(5) (5)Interpretations. Under s. 101.02 (1), Stats., the department reserves the right to interpret the requirements in this chapter and in all adopted codes and standards.
SPS 345.11 Note Note: Section 101.02 (1) of the Statutes reads as follows: “The department shall adopt reasonable and proper rules and regulations relative to the exercise of its powers and authorities and proper rules to govern its proceedings and to regulate the mode and manner of all investigations and hearings."
SPS 345.11 History History: CR 03-012: cr. Register October 2003 No. 574, eff. 11-1-03; CR 10-011: (title), (1) and (2) renum. from Comm 45.02 and am. (title), (1) (title), (intro.), (a), (c) and (d), cr. (1) (e) to (g), and (3) to (5) Register August 2010 No. 656, eff. 9-1-10.
SPS 345.12 SPS 345.12Local regulations. This chapter does not limit the power of cities, villages and towns to make or enforce additional or more stringent regulations, provided the regulations do not conflict with this chapter, any other rule of the department, or law.
SPS 345.12 History History: CR 03-012: cr. Register October 2003 No. 574, eff. 11-1-03; CR 10-011: renum. from Comm 45.03 Register August 2010 No. 656, eff. 9-1-10.
subch. II of ch. SPS 345 Subchapter II — Definitions
SPS 345.20 SPS 345.20Definitions. In this chapter:
SPS 345.20(1) (1) “Alteration" means any of the following:
SPS 345.20(1)(a) (a) A change in a mechanical refrigeration system that involves an extension, addition or change to the arrangement, type or purpose of the existing installation or component.
SPS 345.20(1)(b) (b) A change in the type of refrigerant for a mechanical refrigeration system.
SPS 345.20(2) (2) “Approved" means acceptable to the department.
SPS 345.20(3) (3) “Approved nationally recognized testing laboratory" means a laboratory acceptable to the department, which provides uniform testing and examination procedures and standards for meeting design, manufacturing and factory test requirements of this chapter; is organized, equipped and qualified for testing; and has a follow-up inspection service of the current production of the listed products.
SPS 345.20(4) (4) “Authorized agent" means any of the following or their authorized representatives:
SPS 345.20(4)(a) (a) A boiler-pressure vessel inspector who is so certified under ch. SPS 305 and is addressed in a written contract with the department as enforcing this chapter.
SPS 345.20(4)(b) (b) A local governmental unit that has been authorized in writing by the department to administer and enforce this chapter.
SPS 345.20(4)(c) (c) A first class city that has accepted the responsibility to administer and enforce this chapter.
SPS 345.20 Note Note: As of September 1, 2010, only the City of Milwaukee had become a first class city.
SPS 345.20(5) (5) “Department" means the department of safety and professional services.
SPS 345.20(6) (6) “Ozone-depleting refrigerant" has the meaning specified under s. 100.45 (1) (d), Stats.
SPS 345.20 Note Note: Under s. 100.45 (1) (d), Stats., “ozone-depleting refrigerant" means a substance used in refrigeration that is or contains a class I substance, as defined in 42 USC 7671 (3) or a Class II substance, as defined in 42 USC 7671 (4).
SPS 345.20(7) (7) “Place of employment" has the meaning specified under s. 101.01 (11), Stats.
SPS 345.20 Note Note: Under s. 101.01 (11), Stats., “place of employment" includes every place, whether indoors or out or underground and the premises appurtenant thereto where either temporarily or permanently any industry, trade or business is carried on, or where any process or operation, directly or indirectly related to any industry, trade or business, is carried on, and where any person is, directly or indirectly, employed by another for direct or indirect gain or profit, but does not include any place where persons are employed in private domestic service which does not involve the use of mechanical power or in farming. “Farming" includes those activities specified in s. 102.04 (3), and also includes the transportation of farm products, supplies or equipment directly to the farm by the operator of said farm or employees for use thereon, if such activities are directly or indirectly for the purpose of producing commodities for market, or as an accessory to such production. When used with relation to building codes, “place of employment" does not include an adult family home, as defined in s. 50.01 (1), or, except for the purposes of s. 101.11, a previously constructed building used as a community-based residential facility, as defined in s. 50.01 (1g), which serves 20 or fewer residents who are not related to the operator or administrator.
SPS 345.20(8) (8) “Public building" has the meaning specified under s. 101.01 (12), Stats.
SPS 345.20 Note Note: Under s. 101.01 (12), Stats., “public building" means any structure, including exterior parts of such building, such as a porch, exterior platform or steps providing means of ingress or egress, used in whole or in part as a place of resort, assemblage, lodging, trade, traffic, occupancy, or use by the public or by 3 or more tenants. When used in relation to building codes, “public building" does not include a previously constructed building used as a community-based residential facility as defined in s. 50.01 (1g) which serves 20 or fewer residents who are not related to the operator or administrator or an adult family home, as defined in s. 50.01 (1).
SPS 345.20(9) (9) “Repair" means the restoration of any portion or component of a mechanical refrigeration system to a safe operating condition.
SPS 345.20 History History: CR 03-012: cr. Register October 2003 No. 574, eff. 11-1-03; CR 10-011: (intro.), (2), (3), (5) to (8) renum. from Comm 45.05 (intro.), (1), (2), (4), (7) to (9), r. (3), (5) and (6), cr. (1), (4) and (9) Register August 2010 No. 656, eff. 9-1-10; correction in (4) (a), (5) made under s. 13.92 (4) (b) 6., 7., Stats., Register December 2011 No. 672.
subch. III of ch. SPS 345 Subchapter III — Administration and Enforcement
SPS 345.30 SPS 345.30Installation registration.
SPS 345.30(1) (1)Classifications. Any installation of the following mechanical refrigeration systems or components thereof shall be registered with the department:
SPS 345.30(1)(a) (a) Any system using a Group A1 or B1 refrigerant and having a capacity rated at or greater than 50 horsepower, 50 tons or 50,000 volt-amperes.
SPS 345.30(1)(b) (b) Any system using a Group A2, B2, A3 or B3 refrigerant and having a capacity rated at or greater than 10 horsepower, 10 tons or 10,000 volt-amperes.
SPS 345.30(1)(c) (c) Any alteration of a mechanical refrigeration system, that causes the system to have or exceed the capacity in par. (a) or (b).
SPS 345.30(1)(d) (d) Any alteration or repair of a currently registered mechanical refrigeration system.
SPS 345.30 Note Note: See normative appendix C in ANSI/ASHRAE standard 15, as adopted in subchapter IV, for characteristics of the refrigerant safety groups listed in paragraphs (a) and (b). For characteristics of individual refrigerants, such as the safety groups they are assigned to, see Tables 1 and 2 in ANSI/ASHRAE standard 34, as referenced in appendix E of ANSI/ASHRAE standard 15.
SPS 345.30(2) (2)Forms. Registration information shall be submitted on form SBD-34.
SPS 345.30 Note Note: The Department forms required in this chapter are available for a nominal fee at telephone 800-DOC-SALE or 411 (Telecommunications Relay), or at no charge at the Department's Web site at www.dsps.wi.gov through links to Division of Industry Services forms.
SPS 345.30(3) (3)Submittal deadline.
SPS 345.30(3)(a)(a) The registration form shall be submitted to the department at least 20 business days before the system is initially placed in operation.
SPS 345.30(3)(b) (b) A registration form shall be submitted to the department at least 20 business days before a system is reactivated after an alteration, repair or replacement.
SPS 345.30 Note Note: The purpose of the registration is to inform the Department of the pending activation of the refrigeration system and thereby enable performance of the inspection specified in section SPS 345.31 (2). Under that section, this inspection must be performed within 45 business days after completion of construction or installation.
SPS 345.30 History History: CR 03-012: cr. Register October 2003 No. 574, eff. 11-1-03; CR 10-011: renum. from Comm 45.07 and am. (1) (intro.), (2) and (3), renum. (4) to be Comm 45.32 (6), cr. (1) (c) and (d) Register August 2010 No. 656, eff. 9-1-10.
SPS 345.31 SPS 345.31Enforcement and inspections.
SPS 345.31(1)(1)Enforcement.
SPS 345.31(1)(a)(a) This chapter shall be enforced by the department and its authorized agents.
SPS 345.31 Note Note: Section 101.02 (15) (g) of the Statutes authorizes the Department and its authorized agents to enter any building, facility or premises and examine any mechanical refrigeration system or component and associated records for the purpose of enforcing this chapter.
SPS 345.31(1)(b) (b) Where an authorized agent administers and enforces this chapter in conjunction with the department, the authorized agent's administration and enforcement shall be exercised in advance of the department's administration and enforcement.
SPS 345.31 Note Note: Under section SPS 345.11 (5), the department reserves the right to interpret the requirements in this chapter and in all adopted codes and standards.
SPS 345.31(2) (2)Installation inspection.
SPS 345.31(2)(a)(a) The authorized agent or the department shall inspect a mechanical refrigeration system that is required to be registered under s. SPS 345.30 (1), within 45 business days after completion of the initial construction or installation, and within 45 business days after completion of construction or installation relating to any alteration, repair or replacement.
SPS 345.31(2)(b)1.1. All refrigerant steel piping that will employ welded joints shall be inspected by the authorized agent or the department after the piping material is delivered to the job site and prior to installation of the piping.
SPS 345.31(2)(b)2. 2. The authorized agent or the department shall be given a minimum of 5 business days notice prior to the start of construction to arrange for inspections under this paragraph.
SPS 345.31 Note Note: The Department can be notified by writing to the Division of Industry Services, Mechanical Refrigeration Program, P.O. Box 7302, Madison, WI 53707-7302; or by telephone at 608/266-7548 or 411 (Telecommunications Relay); or by using the contact information available through the following Web site: http://dsps.wi.gov/Documents/Industry%20Services/Maps/Mechanical-Refrigeration-Gas-Systems-Anhydrous-Ammonia%20Map%2008-13.pdf.
SPS 345.31(2)(b)3. 3. If applicable and if required by the authorized agent or the department, the following documents shall be made available for review during inspections under this paragraph:
SPS 345.31(2)(b)3.a. a. Welding procedure specification.
SPS 345.31(2)(b)3.b. b. Procedure qualification record.
SPS 345.31(2)(b)3.c. c. Welder performance qualification.
SPS 345.31(2)(b)3.d. d. Welder continuity record.
SPS 345.31(2)(b)3.e. e. Design calculations.
SPS 345.31(2)(b)3.f. f. Design plans for the piping system.
SPS 345.31(2)(b)3.g. g. Material test reports.
SPS 345.31(2)(b)3.h. h. Certificates of compliance.
SPS 345.31 Note Note: For further information relating to the welding documentation listed in subdivision 3. a. to d., see section IX of the ASME Boiler and Pressure Vessel Code, as referenced in section SPS 345.550 (1).
SPS 345.31(2)(b)4. 4. Form SBD-5204 shall be completed and be retained at the job site for reference during inspections under this paragraph. If the design of the piping is acceptable, the authorized agent or the department shall sign the form.
SPS 345.31(2)(c) (c) Welded, prefabricated steel piping that is part of a mechanical refrigeration system to be erected on a job site shall be inspected at the fabrication shop by the authorized agent or the department – or, for out-of-state fabricators, by an inspector commissioned by the national board of boiler and pressure vessel inspectors. The fabricator shall make a copy of the inspection report or a copy of the completed form SBD-5204 available to the installer at the job site verifying that the prefabricated piping complies with ASME B31.5. Design calculations for the prefabricated piping shall be provided to the authorized agent or the department if so requested.
SPS 345.31(2)(d) (d) Within 5 business days of completing the installations and inspections under par. (b) or (c), a copy of the completed SBD-5204-E form shall be filed with the authorized agent or the department, unless additional time is granted by the authorized agent or the department.
SPS 345.31 Note Note: The address for submitting forms to the Department is the Division of Industry Services, Mechanical Refrigeration Program, P.O. Box 7302, Madison, WI 53707-7302; and the fax number is 608-283-7420.
SPS 345.31 Note Note: ASME B31.5 is a mandatory reference for designers, fabricators and producers of refrigeration equipment, and is referenced in appendix E of ANSI/ASHRAE standard 15, which is adopted in subchapter IV.
SPS 345.31 Note Note: It is recommended that out-of-state installers contact the Department prior to any fabrication or installation of prefabricated piping, to expedite compliance with the Department's requirements.
SPS 345.31 Note Note: The National Board of Boiler and Pressure Vessel Inspectors can be contacted at 1055 Crupper Avenue, Columbus, OH 43229; or at telephone 614.888.8320; or at www.nationalboard.com.
SPS 345.31 Note Note: The Department forms required in this chapter are available for a nominal fee at telephone 800-DOC-SALE or 411 (Telecommunications Relay) or at docsales@doa.state.wi.us, or at no charge at the Department's Web site at www.dsps.wi.gov through links to Division of Industry Services forms.
SPS 345.31(3) (3)Periodic inspections.
SPS 345.31(3)(a)1.1. Except as provided in subd. 2., any mechanical refrigeration system using a Group A1 or B1 refrigerant and having a capacity rated at or greater than 50 horsepower, 50 tons or 50,000 volt-amperes shall be inspected by the authorized agent or the department at least once every 36 months.
SPS 345.31(3)(a)2.a.a. Mechanical refrigeration systems containing a Group A1 or B1 refrigerant which are used only for air conditioning for human occupancy and which have their mechanical components located outdoors with the discharge from any relief valve located at least 20 feet from any building opening are exempt from periodic inspections.
SPS 345.31(3)(a)2.b. b. An air intake opening that is part of an outdoor self-contained system under subd. 2. a. is not considered a building opening for the purposes of this subdivision.
SPS 345.31(3)(b) (b) Any mechanical refrigeration system using a Group A2, B2, A3 or B3 refrigerant and having a capacity rated at or greater than 10 horsepower, 10 tons or 10,000 volt-amperes shall be inspected by the authorized agent or the department at least once every 12 months.
SPS 345.31 Note Note: See Table 1 and normative appendix C in ANSI/ASHRAE standard 15, as adopted in subchapter IV, for characteristics of the refrigerant groups listed in paragraphs (a) and (b).
SPS 345.31 History History: CR 10-011: cr. (title), (1) and (2), sub. (3) renum. from Comm 45.08 (3) and am. Register August 2010 No. 656, eff. 9-1-10; correction in (2) (a) made under s. 13.92 (4) (b) 7., Stats., Register December 2011 No. 672; CR 11-047: cr. (2) (d) Register May 2012 No. 677, eff. 6-1-12.
SPS 345.32 SPS 345.32Permit to operate.
SPS 345.32(1)(a)1.1. Within 5 business days after completing an inspection, the authorized agent or the department shall determine whether the mechanical refrigeration system complies with the applicable requirements of this chapter.
SPS 345.32(1)(a)2. 2. For each inspection performed by an authorized agent, a report shall be sent to the department in accordance with the department's electronic data interchange transfer guidelines, within 5 business days after completing the inspection, unless additional time is authorized by the department.
SPS 345.32 Note Note: The Department will provide assistance at no charge regarding the use of the electronic data interchange system. The guidelines are available on the Internet at http://dsps.wi.gov/SB/docs/SB-BoilerEdiGuidelines.pdf.
SPS 345.32(1)(b) (b) Within 10 business days after making or receiving the determination under par. (a), the department shall issue a permit to operate if it has been determined that the mechanical refrigeration system complies with the applicable requirements of this chapter.
Loading...
Loading...
Published under s. 35.93, Stats. Updated on the first day of each month. Entire code is always current. The Register date on each page is the date the chapter was last published.