This is the preview version of the Wisconsin State Legislature site.
Please see http://docs.legis.wisconsin.gov for the production version.
NR 664.0251(3)(a)1.a. a. A top liner designed and constructed of materials (e.g., a geomembrane) to prevent the migration of hazardous constituents into the liner during the active life and long-term care period.
NR 664.0251(3)(a)1.b. b. A composite bottom liner, consisting of at least 2 components. The upper component shall be designed and constructed of materials (e.g., a geomembrane) to prevent the migration of hazardous constituents into this component during the active life and long-term care period. The lower component shall be designed and constructed of materials to minimize the migration of hazardous constituents if a breach in the upper component were to occur. The lower component shall be constructed of at least 3 feet (91 cm) of compacted soil material with a hydraulic conductivity of no more than 1×10-7 cm/sec.
NR 664.0251(3)(a)2. 2. The liners shall comply with sub. (1) (a) 1., 2. and 3.
NR 664.0251(3)(b) (b) The leachate collection and removal system immediately above the top liner shall be designed, constructed, operated and maintained to collect and remove leachate from the waste pile during the active life and long-term care period. The department will specify design and operating conditions in the operating license to ensure that the leachate depth over the liner does not exceed 30 cm (one foot). The leachate collection and removal system shall comply with par. (c) 3. and 4.
NR 664.0251(3)(c) (c) The leachate collection and removal system between the liners, and immediately above the bottom composite liner in the case of multiple leachate collection and removal systems, is also a leak detection system. This leak detection system shall be capable of detecting, collecting and removing leaks of hazardous constituents at the earliest practicable time through all areas of the top liner likely to be exposed to waste or leachate during the active life and long-term care period. The requirements for a leak detection system in this subsection are satisfied by installation of a system that is, at a minimum, all of the following:
NR 664.0251(3)(c)1. 1. Constructed with a bottom slope of 1% or more.
NR 664.0251(3)(c)2. 2. Constructed of granular drainage materials with a hydraulic conductivity of 1×10-2 cm/sec or more and a thickness of 12 inches (30.5 cm) or more; or constructed of synthetic or geonet drainage materials with a transmissivity of 3×10 -5 m 2/sec or more.
NR 664.0251(3)(c)3. 3. Constructed of materials that are chemically resistant to the waste managed in the waste pile and the leachate expected to be generated, and of sufficient strength and thickness to prevent collapse under the pressures exerted by overlying wastes, waste cover materials and equipment used at the waste pile.
NR 664.0251(3)(c)4. 4. Designed and operated to minimize clogging during the active life and long-term care period.
NR 664.0251(3)(c)5. 5. Constructed with sumps and liquid removal methods (e.g., pumps) of sufficient size to collect and remove liquids from the sump and prevent liquids from backing up into the drainage layer. Each unit shall have its own sump. The design of each sump and removal system shall provide a method for measuring and recording the volume of liquids present in the sump and of liquids removed.
NR 664.0251(3)(d) (d) The owner or operator shall collect and remove pumpable liquids in the leak detection system sumps to minimize the head on the bottom liner.
NR 664.0251(3)(e) (e) The owner or operator of a leak detection system that is not located completely above the seasonal high water table shall demonstrate that the operation of the leak detection system will not be adversely affected by the presence of groundwater.
NR 664.0251(4) (4)The department may approve alternative design or operating practices to those specified in sub. (3) if the owner or operator demonstrates to the department that the design and operating practices, together with location characteristics, will do both of the following:
NR 664.0251(4)(a) (a) Prevent the migration of any hazardous constituent into the groundwater or surface water at least as effectively as the liners and leachate collection and removal systems specified in sub. (3).
NR 664.0251(4)(b) (b) Allow detection of leaks of hazardous constituents through the top liner at least as effectively.
NR 664.0251(5) (5)Subsection (3) does not apply to monofills that are granted a waiver by the department in accordance with s. NR 664.0221 (5).
NR 664.0251(6) (6)The owner or operator of any replacement waste pile unit is exempt from sub. (3) if both of the following apply:
NR 664.0251(6)(a) (a) The existing unit was constructed in compliance with the design standards of 42 USC 6924(o)(1)(A)(i) and (5).
NR 664.0251(6)(b) (b) There is no reason to believe that the liner is not functioning as designed.
NR 664.0251(7) (7)The owner or operator shall design, construct, operate and maintain a run-on control system capable of preventing flow onto the active portion of the pile during peak discharge from at least a 25-year storm.
NR 664.0251(8) (8)The owner or operator shall design, construct, operate and maintain a run-off management system to collect and control at least the water volume resulting from a 24-hour, 25-year storm.
NR 664.0251(9) (9)Collection and holding facilities (e.g., tanks or basins) associated with run-on and run-off control systems shall be emptied or otherwise managed expeditiously after storms to maintain design capacity of the system.
NR 664.0251(10) (10)If the pile contains any particulate matter which may be subject to wind dispersal, the owner or operator shall cover or otherwise manage the pile to control wind dispersal.
NR 664.0251(11) (11)The department shall specify in the operating license all design and operating practices that are necessary to ensure that the requirements of this section are satisfied.
NR 664.0251 History History: CR 05-032: cr. Register July 2006 No. 607, eff. 8-1-06; CR 16-007: am. (3) (intro.) Register July 2017 No. 739, eff. 8-1-17.
NR 664.0252 NR 664.0252Action leakage rate.
NR 664.0252(1)(1)The department shall approve an action leakage rate for waste pile units subject to s. NR 664.0251 (3) or (4). The action leakage rate is the maximum design flow rate that the leak detection system can remove without the fluid head on the bottom liner exceeding one foot. The action leakage rate shall include an adequate safety margin to allow for uncertainties in the design (e.g., slope, hydraulic conductivity, thickness of drainage material), construction, operation and location of the leak detection system, waste and leachate characteristics, likelihood and amounts of other sources of liquids in the leak detection system and proposed response actions (e.g., the action leakage rate shall consider decreases in the flow capacity of the system over time resulting from siltation and clogging, rib layover and creep of synthetic components of the system, overburden pressures, etc.).
NR 664.0252(2) (2)To determine if the action leakage rate has been exceeded, the owner or operator shall convert the weekly flow rate from the monitoring data obtained under s. NR 664.0254 (3), to an average daily flow rate (gallons per acre per day) for each sump. Unless the department approves a different calculation, the average daily flow rate for each sump shall be calculated weekly during the active life and closure period.
NR 664.0252 History History: CR 05-032: cr. Register July 2006 No. 607, eff. 8-1-06.
NR 664.0253 NR 664.0253Response actions.
NR 664.0253(1)(1)The owner or operator of waste pile units subject to s. NR 664.0251 (3) or (4) shall have an approved response action plan before receipt of waste. The response action plan shall set forth the actions to be taken if the action leakage rate has been exceeded. At a minimum, the response action plan shall describe the actions specified in sub. (2).
NR 664.0253(2) (2)If the flow rate into the leak detection system exceeds the action leakage rate for any sump, the owner or operator shall do all of the following:
NR 664.0253(2)(a) (a) Notify the department in writing of the exceedance within 7 days of the determination.
NR 664.0253(2)(b) (b) Submit a preliminary written assessment to the department within 14 days of the determination, as to the amount of liquids, likely sources of liquids, possible location, size and cause of any leaks and short-term actions taken and planned.
NR 664.0253(2)(c) (c) Determine to the extent practicable the location, size and cause of any leak.
NR 664.0253(2)(d) (d) Determine whether waste receipt should cease or be curtailed, whether any waste should be removed from the unit for inspection, repairs or controls and whether or not the unit should be closed.
NR 664.0253(2)(e) (e) Determine any other short-term and long-term actions to be taken to mitigate or stop any leaks.
NR 664.0253(2)(f) (f) Within 30 days after the notification that the action leakage rate has been exceeded, submit to the department the results of the analyses specified in pars. (c), (d) and (e), the results of actions taken and actions planned. Monthly thereafter, as long as the flow rate in the leak detection system exceeds the action leakage rate, the owner or operator shall submit to the department a report summarizing the results of any remedial actions taken and actions planned.
NR 664.0253(3) (3)To make the leak and remediation determinations in sub. (2) (c), (d) and (e), the owner or operator shall comply with par. (a) or (b):
NR 664.0253(3)(a) (a) Do all of the following:
NR 664.0253(3)(a)1. 1. Assess the source of liquids and amounts of liquids by source.
NR 664.0253(3)(a)2. 2. Conduct a fingerprint, hazardous constituent or other analyses of the liquids in the leak detection system to identify the source of liquids and possible location of any leaks, and the hazard and mobility of the liquid.
NR 664.0253(3)(a)3. 3. Assess the seriousness of any leaks in terms of potential for escaping into the environment.
NR 664.0253(3)(b) (b) Document why the assessments are not needed.
NR 664.0253 History History: CR 05-032: cr. Register July 2006 No. 607, eff. 8-1-06.
NR 664.0254 NR 664.0254Monitoring and inspection.
NR 664.0254(1)(1)During construction or installation, liners (except in the case of existing portions of piles exempt from s. NR 664.0251 (1)) and cover systems (e.g., membranes, sheets or coatings) shall be inspected for uniformity, damage and imperfections (e.g., holes, cracks, thin spots or foreign materials). Both of the following inspections are required immediately after construction or installation:
NR 664.0254(1)(a) (a) Synthetic liners and covers shall be inspected to ensure tight seams and joints and the absence of tears, punctures or blisters.
NR 664.0254(1)(b) (b) Soil-based and admixed liners and covers shall be inspected for imperfections including lenses, cracks, channels, root holes or other structural non-uniformities that may cause an increase in the permeability of the liner or cover.
NR 664.0254(2) (2)While a waste pile is in operation, it shall be inspected weekly and after storms to detect evidence of any of the following:
NR 664.0254(2)(a) (a) Deterioration, malfunctions or improper operation of run-on and run-off control systems.
NR 664.0254(2)(b) (b) Proper functioning of wind dispersal control systems, where present.
NR 664.0254(2)(c) (c) The presence of leachate in and proper functioning of leachate collection and removal systems, where present.
NR 664.0254(3) (3)An owner or operator required to have a leak detection system under s. NR 664.0251 (3) shall record the amount of liquids removed from each leak detection system sump at least once each week during the active life and closure period.
NR 664.0254 History History: CR 05-032: cr. Register July 2006 No. 607, eff. 8-1-06.
NR 664.0256 NR 664.0256Special requirements for ignitable or reactive waste. Ignitable or reactive waste may not be placed in a waste pile unless the waste and waste pile satisfy all applicable requirements of ch. NR 668 and sub. (1) or (2):
NR 664.0256(1) (1)The waste is treated, rendered or mixed before or immediately after placement in the pile so that both of the following apply:
NR 664.0256(1)(a) (a) The resulting waste, mixture or dissolution of material no longer meets the definition of ignitable or reactive waste under s. NR 661.0021 or 661.0023.
NR 664.0256(1)(b) (b) Section NR 664.0017 (2) is complied with.
NR 664.0256(2) (2)The waste is managed in such a way that it is protected from any material or conditions which may cause it to ignite or react.
NR 664.0256 History History: CR 05-032: cr. Register July 2006 No. 607, eff. 8-1-06; CR 19-082: am. (1) (a) Register August 2020 No 776.
NR 664.0257 NR 664.0257Special requirements for incompatible wastes.
NR 664.0257(1)(1)Incompatible wastes, or incompatible wastes and materials, (see ch. NR 664 Appendix V for examples) may not be placed in the same pile, unless s. NR 664.0017 (2) is complied with.
NR 664.0257(2) (2)A pile of hazardous waste that is incompatible with any waste or other material stored nearby in containers, other piles, open tanks or surface impoundments shall be separated from the other materials, or protected from them by means of a dike, berm, wall or other device.
NR 664.0257(3) (3)Hazardous waste may not be piled on the same base where incompatible wastes or materials were previously piled, unless the base has been decontaminated sufficiently to ensure compliance with s. NR 664.0017 (2).
NR 664.0257 History History: CR 05-032: cr. Register July 2006 No. 607, eff. 8-1-06; correction in (1) made under s. 13.92 (4) (b) 7., Stats., Register March 2013 No. 687.
NR 664.0258 NR 664.0258Closure and long-term care.
NR 664.0258(1)(1)At closure, the owner or operator shall remove or decontaminate all waste residues, contaminated containment system components (liners, etc.), contaminated subsoils and structures and equipment contaminated with waste and leachate, and manage them as hazardous waste unless s. NR 661.0003 (4) applies.
NR 664.0258(2) (2)If, after removing or decontaminating all residues and making all reasonable efforts to effect removal or decontamination of contaminated components, subsoils, structures and equipment as required in sub. (1), the owner or operator finds that not all contaminated subsoils can be practicably removed or decontaminated, the owner or operator shall close the facility and perform long-term care in accordance with the closure and long-term care requirements that apply to landfills (s. NR 664.0310).
NR 664.0258(3)(a)(a) The owner or operator of a waste pile that does not comply with the liner requirements of s. NR 664.0251 (1) (a) and is not exempt from them in accordance with s. NR 664.0250 (3) or 664.0251 (2), shall do both of the following:
NR 664.0258(3)(a)1. 1. Include in the closure plan for the pile under s. NR 664.0112 both a plan for complying with sub. (1) and a contingent plan for complying with sub. (2) in case not all contaminated subsoils can be practicably removed at closure.
NR 664.0258(3)(a)2. 2. Prepare a contingent long-term care plan under s. NR 664.0118 for complying with sub. (2) in case not all contaminated subsoils can be practicably removed at closure.
NR 664.0258(3)(b) (b) The cost estimates calculated under ss. NR 664.0142 and 664.0144 for closure and long-term care of a pile subject to this subsection shall include the cost of complying with the contingent closure plan and the contingent long-term care plan, but are not required to include the cost of expected closure under sub. (1).
NR 664.0258 History History: CR 05-032: cr. Register July 2006 No. 607, eff. 8-1-06; CR 19-082: am. (1) Register August 2020 No 776, eff. 9-1-20.
NR 664.0259 NR 664.0259Special requirements for hazardous wastes F020, F021, F022, F023, F026 and F027.
NR 664.0259(1)(1)Hazardous wastes F020, F021, F022, F023, F026 and F027 may not be placed in waste piles that are not enclosed (as defined in s. NR 664.0250 (3)) unless the owner or operator operates the waste pile in accordance with a management plan for these wastes that is approved by the department pursuant to the standards set out in this subsection, and in accord with all other applicable requirements of this chapter. All of the following factors shall be considered:
NR 664.0259(1)(a) (a) The volume and physical and chemical characteristics of the wastes, including their potential to migrate through soil or to volatilize or escape into the atmosphere.
NR 664.0259(1)(b) (b) The attenuative properties of underlying and surrounding soils or other materials.
NR 664.0259(1)(c) (c) The mobilizing properties of other materials co-disposed with these wastes.
NR 664.0259(1)(d) (d) The effectiveness of additional treatment, design or monitoring techniques.
NR 664.0259(2) (2)The department may determine that additional design, operating and monitoring requirements are necessary for piles managing hazardous wastes F020, F021, F022, F023, F026 and F027 in order to reduce the possibility of migration of these wastes to groundwater, surface water or air so as to protect human health and the environment.
NR 664.0259 History History: CR 05-032: cr. Register July 2006 No. 607, eff. 8-1-06.
subch. M of ch. NR 664 Subchapter M — Land Treatment
NR 664.0270 NR 664.0270Applicability. Land treatment of any hazardous waste is prohibited. The department may not grant a variance under s. 291.31, Stats., to allow land treatment of any hazardous waste, as identified or listed in ch. NR 661.
NR 664.0270 History History: CR 05-032: cr. Register July 2006 No. 607, eff. 8-1-06.
subch. N of ch. NR 664 Subchapter N — Landfills
NR 664.0300 NR 664.0300Applicability. This subchapter applies to owners and operators of facilities that dispose of hazardous waste in landfills, except as s. NR 664.0001 provides otherwise.
NR 664.0300 History History: CR 05-032: cr. Register July 2006 No. 607, eff. 8-1-06.
Loading...
Loading...
Published under s. 35.93, Stats. Updated on the first day of each month. Entire code is always current. The Register date on each page is the date the chapter was last published.