This is the preview version of the Wisconsin State Legislature site.
Please see http://docs.legis.wisconsin.gov for the production version.
NR 211.11(4) (4)Compensation for pollutants in intake water.
NR 211.11(4)(a)(a) Categorical pretreatment standards may be adjusted to reflect the presence of pollutants in an industrial user's intake water if the applicable categorical pretreatment standards specifically provide that they may be applied on a net basis or if the industrial user demonstrates to the control authority that:
NR 211.11(4)(a)1. 1. The control system used or proposed to meet the categorical pretreatment standards would meet the categorical pretreatment standards in the absence of pollutants in the intake water if the control system is properly installed and operated;
NR 211.11(4)(a)2. 2. The constituents of a generic measure, such as BOD, TSS or oil and grease, in the industrial user's effluent are substantially similar to the constituents of the generic measure in the intake water. The control authority may waive this requirement if appropriate additional limits are placed on process water pollutants either at the point of discharge or elsewhere; and
NR 211.11(4)(a)3. 3. The intake water is drawn from the same water body as the water body to which the POTW discharges. The control authority may waive this requirement if it finds that no environmental de-gradation will result.
NR 211.11(4)(b) (b) The control authority shall grant credits only to the extent necessary to meet the applicable categorical pretreatment standards, up to a maximum value equal to the influent value. The control authority may require additional monitoring to determine eligibility for credits and compliance with the adjusted standards.
NR 211.11 History History: Cr. Register, July, 1983, No. 331, eff. 8-1-83; am. (1), r. and recr. (2) and (3), cr. (4), Register, March, 1992, No. 435, eff. 4-1-92; CR 13-006: am. (3) (title), cr. (3) (a) 5., r. (3) (b), cr. (3) (bm), r. (3) (c), cr. (3) (cm), (d), (e), am. (4) (a) (intro.) Register January 2014 No. 697, eff. 2-1-14.
NR 211.12 NR 211.12Combined wastestreams.
NR 211.12(1)(1)Where effluent from a process regulated by a categorical pretreatment standard is mixed prior to treatment with wastewaters other than those generated by the regulated process, fixed alternative discharge limits may be established by the control authority or by the industrial user with the written concurrence of the control authority. These alternative limits shall apply to the mixed effluent. When deriving alternative categorical limits, the control authority or industrial user shall calculate both an alternative daily maximum value using the daily maximum values specified in the appropriate categorical pretreatment standards and an alternative monthly average value using the monthly average values specified in the appropriate categorical pretreatment standards. The industrial user shall comply with the alternative daily maximum and monthly average limits approved by the control authority until the control authority modifies the limits or approves an industrial user modification request. Modification is authorized whenever there is a material or significant change in the values used in the calculation to fix alternative limits for the regulated pollutant. An industrial user shall immediately report any such material or significant change to the control authority. New alternative categorical limits shall be calculated within 30 days.
NR 211.12(2) (2)Alternative limit calculation. Alternative limits shall be derived according to the following formulas:
NR 211.12(2)(a) (a) Alternative concentration limit: - See PDF for diagram PDF
NR 211.12(2)(b) (b) Alternative mass limit: - See PDF for diagram PDF
NR 211.12(2)(c)1. 1. Boiler blowdown, non-contact cooling, stormwater and demineralizer backwash streams. However, if these streams contain a significant amount of a pollutant and if the combination of these streams with an industrial user's regulated process waste-stream prior to treatment will result in a substantial reduction of that pollutant, the control authority, upon the industrial user's application, shall determine whether these streams should be classified as diluted or unregulated. In its application to the control authority, the industrial user shall provide engineering, production, sampling and analysis and other information necessary for the control authority to make its determinations;
NR 211.12(2)(c)2. 2. Sanitary wastestreams where the streams are not regulated by a categorical pretreatment standard; or
NR 211.12(2)(c)3. 3. Any process wastestreams which were or could have been entirely exempted from categorical pretreatment standards for one or more of the following reasons:
NR 211.12(2)(c)3.a. a. The pollutants regulated by the categorical pretreatment standards used in the formula are not detectable in the effluent from the industrial user;
NR 211.12(2)(c)3.b. b. The pollutants of concern are present only in trace amounts and are neither causing nor likely to cause toxic effects;
NR 211.12(2)(c)3.c. c. The pollutants of concern are present in amounts too small to be effectively reduced by technologies known to the administrator of EPA; or
NR 211.12(2)(c)3.d. d. The wastestream contains only pollutants that are compatible with the POTW.
NR 211.12(3) (3)Alternate limits below detection limit. An alternative pretreatment limit may not be used if the alternative limit is below the analytical detection limit for any of the regulated pollutants.
NR 211.12(4) (4)Self-monitoring. Self-monitoring to insure compliance with the alternative categorical limit shall be conducted in accordance with s. NR 211.15 (4).
NR 211.12(5) (5)Choice of monitoring location.
NR 211.12(5)(a)(a) If a treated regulated process wastestream is combined with wastewaters other than those generated by the regulated process, the industrial user may monitor either the segregated process wastestream or the combined wastestream for purposes of determining compliance with the applicable pretreatment standards. If the industrial user chooses to monitor the segregated process wastestream, the industrial user shall apply the applicable categorical pretreatment standard. If the industrial user chooses to monitor the combined wastestream, the industrial user shall apply an alternative discharge limit calculated according to the combined wastestream formula in sub. (2).
NR 211.12(5)(b) (b) An industrial user may change monitoring points only after receiving approval from the control authority. The control authority shall ensure that any change in an industrial user's monitoring point will not allow the industrial user to substitute dilution for adequate treatment.
NR 211.12 History History: Cr. Register, September, 1986, No. 369, eff. 10-1-86; am. (1), r. and recr. (2) and (4), cr. (5) and (6), Register, March, 1992, No. 435, eff. 4-1-92; CR 13-006: r. (6) Register January 2014 No. 697, eff. 2-1-14.
NR 211.13 NR 211.13Removal credits.
NR 211.13(1)(a) (a) Any POTW receiving wastes from an industrial user to which a categorical pretreatment standard applies may, subject to the conditions of this section, grant removal credits for removal by the POTW of pollutants specified in the categorical pretreatment standard. The POTW may grant a removal credit equal to or less than its consistent removal rate. Upon being granted a removal credit, each affected industrial user shall calculate its revised discharge limits in accordance with par. (c).
NR 211.13(1)(b) (b) A POTW may give removal credits only if:
NR 211.13(1)(b)1. 1. The POTW applies for and receives authorization from the department to give a removal credit in accordance with the requirements and procedures specified in sub. (5). Removal credits may only be given for indicator or surrogate pollutants regulated in a categorical pretreatment standard if the categorical pretreatment standard so specifies.
NR 211.13(1)(b)2. 2. The POTW demonstrates and continues to achieve consistent removal of the pollutant in accordance with sub. (2).
NR 211.13(1)(b)3. 3. Except as provided in sub. (7), the POTW has an approved pretreatment program as required by this chapter; however, a POTW which does not have an approved pretreatment program may, pending approval of such a program, conditionally give credits as provided in sub. (4).
NR 211.13(1)(b)4. 4. The granting of removal credits will not cause the POTW to violate the local, state and federal sludge requirements which apply to the sludge management method chosen by the POTW. Alternatively, the POTW can demonstrate to the department that even though it is not presently in compliance with applicable sludge requirements, it will be in compliance when the industrial user to whom the removal credit would apply is required to meet its modified categorical pretreatment standard.
NR 211.13(1)(b)5. 5. The granting of removal credits will not cause a violation of the POTW's permit limitations or conditions. Alternatively, the POTW can demonstrate to the department that even though it is not presently in compliance with applicable limitations and conditions in its WPDES permit, it will be in compliance when the industrial user to whom the removal credit would apply is required to meet its modified categorical pretreatment standard.
NR 211.13(1)(b)6. 6. The granting of removal credits will not result in a discharge of pollutants to waters of the state greater than the discharge that would be allowed if the pollutants were discharged other than through a POTW.
NR 211.13(1)(c) (c) Revised discharge limits for a specific pollutant shall be derived by use of the following formula:
y = x
l-r
where:
x =   pollutant discharge limit specified in the applicable
  categorical pretreatment standard.
r =   removal credit for that pollutant as established under         sub. (2) (percentage removal expressed as a proportion,       i.e., a number between 0 and 1).
y =   revised discharge limit for the specified pollutant
  (expressed in same units as x).
NR 211.13(2) (2)Demonstration of consistent removal. In order to demonstrate consistent removal, the POTW shall, for each pollutant [for] which removal credit authorization is sought, collect influent and effluent data and calculate consistent removal in accordance with the following requirements:
NR 211.13(2)(a) (a) At least 12 representative samples of influent and effluent shall be taken at approximately equal intervals throughout one full year. Sampling shall be evenly distributed over the days of the week to include non-work days as well as work days. Upon concurrence of the department, a POTW may utilize a historical data base either in lieu of or as a supplement to these 12 samples. In order to be approved, the historical data base shall represent the yearly and seasonal conditions to which the POTW is subject and the POTW's performance for at least one year. Alternatively, a POTW, upon approval of the department, may utilize an alternative sampling design, if the samples to be taken represent the POTW's normal operating conditions and the different seasonal conditions to which the POTW is subject.
NR 211.13(2)(b) (b) The POTW shall use the composite sampling method unless the grab sampling method is more appropriate.
NR 211.13(2)(b)1. 1. Composite method.
NR 211.13(2)(b)1.a.a. Influent and effluent operational data should be obtained through 24-hour flow proportional composite samples. Sampling may be done manually or automatically, and discretely or continuously. If discrete sampling is employed, at least 12 aliquots shall be composited. Discrete sampling may be flow proportioned either by varying the time interval between each aliquot or the volume of each aliquot. All composites shall be flow proportional to either the stream flow at the time of collection of the influent aliquot or to the total influent flow since the previous influent aliquot. Volatile pollutant aliquots shall be combined in the laboratory immediately before analysis.
NR 211.13(2)(b)1.b. b. Effluent sample collection need not be delayed to compensate for hydraulic detention. However, the POTW may elect to include detention time compensation or the department may require detention time compensation. The department may require that each effluent sample is taken approximately one detention time later than the corresponding influent sample if necessary to represent actual POTW operation. The detention period shall be based on a 24-hour average daily flow value. The average daily flow shall be based on the average of the daily flows during the same month of the previous year.
NR 211.13(2)(b)2. 2. Grab method. If composite sampling is not an appropriate technique, grab samples shall be taken to obtain influent and effluent operational data. A grab sample is an individual sample collected over a period of time not exceeding 15 minutes. The collection of influent grab samples shall precede the collection of effluent samples by approximately one detention period except that where the detention period is greater than 24 hours such staggering of the sample collection may not be necessary or appropriate. The detention period shall be based on a 24-hour average daily flow value. The average daily flow shall be based upon the average of the daily flows during the same month of the previous year. Grab sampling shall be employed where the pollutants being evaluated are those which may not be held for an extended period because of biological, chemical or physical interaction after sample collection which affects the results.
NR 211.13 Note Note: Examples: Cyanide and phenol.
NR 211.13(2)(c) (c) The POTW shall analyze the samples for pollutants in accordance with the analytical techniques prescribed in ch. NR 219. If ch. NR 219 does not contain analytical techniques for the pollutant in question, or if the department determines that ch. NR 219 analytical techniques are inappropriate, the analysis shall be performed using validated analytical methods or any other applicable analytical procedures approved by the department including procedures suggested by the POTW.
NR 211.13(2)(d)1.1. For purposes of this paragraph “measurable" refers to the ability of the analytical method to quantify as well as identify the presence of the pollutant in question. “Limit of detectability" refers to the lowest limit at which the analytical method can quantify the pollutant in question.
NR 211.13(2)(d)2. 2. For each sample, removal shall be calculated by dividing the difference between the concentrations of a pollutant in the POTW's influent and effluent by the influent concentration. If the number of samples with measurable concentrations is greater than 12, the consistent removal is the average of the lowest half of the removals. If the number of samples with measurable concentrations is between 8 and 12, the consistent removal is the average of the lowest 6 removals. If less than 8 samples have measurable concentrations, the department may approve a means for demonstrating consistent removal on a case-by-case basis.
NR 211.13(2)(d)3. 3. If a substance is measurable in the influent but not in the effluent, the effluent concentration may be assumed to be the limit of measurement, and those data may be used by the POTW, subject to approval by the department.
NR 211.13(2)(d)4. 4. When calculating consistent removal, the POTW shall use all of the data obtained for measuring removal, except for measurements in which a substance is not measurable in the influent.
NR 211.13(2)(e) (e) If an overflow of untreated water to receiving water occurs at least once per year, a POTW may claim consistent removal only by complying with either subd. 1. or 2., except as provided in subd. 3.
NR 211.13(2)(e)1. 1. The POTW shows, to the department's satisfaction, that:
NR 211.13(2)(e)1.a. a. All industrial users to which the POTW proposes to apply removal credits have demonstrated the ability to contain or reduce discharges or increase pretreatment to compensate for the removal not being provided by the POTW during circumstances in which overflow can be reasonably expected to occur;
NR 211.13(2)(e)1.b. b. The POTW has identified circumstances in which an overflow event can be reasonably expected to occur and has a notification plan or other viable plan to ensure that industrial users will learn of an impending overflow event in sufficient time to contain or reduce discharges or increase pretreatment to prevent untreated overflow from occurring;
NR 211.13(2)(e)1.c. c. The POTW will monitor and verify the data required in subd. 1. d. to ensure that industrial users are containing or reducing discharges or pretreatment during overflow events; and
NR 211.13(2)(e)1.d. d. All industrial users to which the POTW proposes to apply removal credits have demonstrated the ability and commitment to collect and make available, upon request, to the POTW, department or EPA, daily flow reports or other data sufficient to demonstrate that all discharges from regulated processes containing the pollutant for which the removal credit is requested were contained, reduced or subject to increased pretreatment during all circumstances in which an overflow was reasonably expected to occur.
NR 211.13(2)(e)2.a.a. The consistent removal calculated according to par. (d) is reduced according to the following equation:
rc = rm 8760 - Z
8760
NR 211.13(2)(e)2.b. b. The POTW is complying with all WPDES permit requirements and any additional requirements in any order or decree issued pursuant to the Federal Water Pollution Control Act, (33 U.S. Code section 1251 et seq.), (Clean Water Act), affecting combined sewer outflows. These requirements include, but are not limited to, any requirements contained in EPA's Combined Sewer Overflow Control Policy.
NR 211.13(2)(e)3. 3. This paragraph does not apply if the industrial user can show that overflow does not occur between the industrial user and the POTW treatment plant.
NR 211.13(3) (3)Provisional credits. For pollutants which are not discharged currently (i.e., new or modified facilities, or production changes) the POTW may apply for authorization to give removal credits prior to the initial discharge of the pollutant. Consistent removal for the first 18 months of discharge shall be based on data from treatability studies or demonstrated removal at other treatment facilities where the quality and quantity of influent are similar. Eighteen months after initial discharge of pollutants, consistent removal shall be demonstrated pursuant to the requirements of sub. (2). If the POTW cannot demonstrate consistent removal pursuant to the requirements of sub. (2), the authority to grant provisional removal credits shall be terminated by the department. All industrial users to whom the revised discharge limits had been applied shall achieve compliance with the applicable categorical pretreatment standards within a reasonable time, not to exceed the period of time prescribed in the applicable categorical pretreatment standards, as may be specified by the department.
NR 211.13(4) (4)Terms and conditions for POTW granting and continuing conditional removal credits. A POTW required to develop a local pretreatment program by s. NR 211.20 may give removal credits pending approval of the program under the following terms and conditions:
NR 211.13(4)(a) (a) All industrial users who are currently subject to a categorical pretreatment standard and who apply for a conditional removal credit shall submit to the POTW the information required in s. NR 211.15 (1) (a) to (h). However, new or modified industrial users shall only submit the information required by s. NR 211.15 (1) (a) to (f), pertaining to the categorical pretreatment standard as modified by the removal credit. The industrial users shall indicate what additional technology, if any, will be needed to comply with the categorical pretreatment standard as modified by the removal credit;
NR 211.13(4)(b) (b) The POTW shall have submitted to the department an application for pretreatment program approval meeting the requirements of subch. II of ch. NR 211 in a timely manner, not to exceed the time limitation set forth in a compliance schedule for development of a pretreatment program included in the POTW's WPDES permit, but in no case later than July 1, 1983, where no permit deadline exists;
NR 211.13(4)(c) (c) The POTW shall:
NR 211.13(4)(c)1. 1. Compile and submit data demonstrating its consistent removal in accordance with sub. (2);
NR 211.13(4)(c)2. 2. Comply with the conditions specified in sub. (1) (b); and
NR 211.13(4)(c)3. 3. Submit a complete application for removal credit authority in accordance with sub. (5);
NR 211.13(4)(d) (d) If a POTW receives authority to grant conditional removal credits and the department subsequently makes a final determination, after appropriate notice, that the POTW failed to comply with the conditions in pars. (b) and (c), the authority to grant conditional removal credits shall be terminated by the department. All industrial users to whom the revised discharge limits had been applied shall achieve compliance with the applicable categorical pretreatment standard within a reasonable time, not to exceed the period of time prescribed in the applicable categorical pretreatment standard, as may be specified by the department.
NR 211.13(4)(e) (e) If a POTW grants conditional removal credits and the POTW or the department subsequently makes a final determination, after appropriate notice, that the industrial user failed to comply with the conditions in par. (a), the conditional credit shall be terminated by the POTW or the department for the non-complying industrial user. The industrial user to whom the revised discharge limits had been applied shall achieve compliance with the applicable categorical pretreatment standard within a reasonable time, not to exceed the period of time prescribed in the applicable categorical pretreatment standard, as may be specified by the department. The conditional credit may not be terminated where a violation of the provisions of this paragraph results from causes entirely outside of the control of the industrial user or the industrial user had demonstrated substantial compliance.
NR 211.13(4)(f) (f) The department may decide not to review an application for conditional removal credit authority, in which case the conditionally revised discharge limits shall become effective and remain in effect until reviewed by the department. This review shall be conducted in accordance with the procedures of s. NR 211.30 before any pretreatment program approval or any WPDES permit reissuance pursuant to the pretreatment program approval.
NR 211.13(5) (5)POTW application for authorization to give removal credits.
NR 211.13(5)(a)(a) Any POTW that wants to give removal credits or modify existing ones shall apply for authorization from the department. Such application may be submitted at any time and shall include the following information:
NR 211.13(5)(a)1. 1. A list of pollutants for which removal credits are proposed;
NR 211.13(5)(a)2. 2. The data required pursuant to sub. (2);
NR 211.13(5)(a)3. 3. Proposed revised discharge limits for each affected subcategory of industrial users calculated in accordance with sub. (1) (c);
NR 211.13(5)(a)4. 4. A certification that the POTW has an approved local pretreatment program or qualifies for the exceptions to this requirement found in subs. (4) and (7);
NR 211.13(5)(a)5. 5. A specific description of the POTW's current methods of using or disposing of its sludge and a certification that the granting of removal credits will not cause a violation of the sludge requirements identified in sub. (1) (b) 4.;
NR 211.13(5)(a)6. 6. A certification that the granting of removal credits will not cause a violation of the POTW's WPDES permit limits and conditions as required in sub. (1) (b) 5.; and
NR 211.13(5)(a)7. 7. A demonstration that the granting of removal credits will be consistent with sub. (1) (b) 6. for each industrial user for whom removal credits are proposed.
NR 211.13(5)(b) (b) The department shall review the POTW's application for authorization to give or modify removal credits in accordance with the procedures of s. NR 211.30 within 180 days from public notice of an application to complete review.
NR 211.13(5)(c) (c) Nothing in these regulations precludes an industrial user or other interested party from assisting the POTW in preparing and presenting the information necessary to apply for authorization.
NR 211.13(6) (6)Continuation and withdrawal of authorization.
NR 211.13(6)(a)(a) A POTW authorized to grant removal credits for a pollutant regulated in a categorical pretreatment standard may extend that removal credit to the same pollutant when it is regulated in other categorical standards. If a POTW elects to extend removal credits to a new categorical standard, industrial subcategory, or one or more industrial users that were not granted removal credits, it shall notify the department. A POTW may extend removal credits if granting the removal credit will not cause the POTW to violate the sludge requirements identified in sub. (1) (b) 4., or its WPDES permit limits and conditions as required by sub. (1) (b) 5.
NR 211.13(6)(b) (b) Removal credits shall be included in the authorized POTW's WPDES permit as soon as possible and shall become an enforceable requirement of the POTW's WPDES permit. The removal credits shall remain in effect for the term of the POTW's WPDES permit, provided the POTW maintains compliance with the conditions specified in par. (d).
Loading...
Loading...
Published under s. 35.93, Stats. Updated on the first day of each month. Entire code is always current. The Register date on each page is the date the chapter was last published.