Summary of factual data and analytical methodologies:
The Designer Section determined that a revision of ch. A-E 5 was necessary after applications for a permit required multiple requests for additional information. Input for the revisions to ch. A-E 5 was solicited from the Designer Section, the Professional Engineer Section, the A-E Board, and the A-E Rules Committee. Analysis and supporting documents used to determine effect on small business or in preparation of economic impact analysis:
The rules were posted for a period of 14 days to solicit public comment on economic impact, including how the rules may affect businesses, local government units, and individuals. No comments were received.
Fiscal Estimate and Economic Impact Analysis:
The Fiscal Estimate and Economic Impact Analysis document is attached.
Effect on small business:
These rules do not have an economic impact on small businesses, as defined in s. 227.114 (1), Stats. The Department’s Regulatory Review Coordinator may be contacted by email at Daniel.Hereth@wisconsin.gov or by calling (608) 267-2435. Agency contact person:
Dale Kleven, Administrative Rules Coordinator, Department of Safety and Professional Services, Division of Policy Development, 4822 Madison Yards Way, P.O. Box 8366, Madison, Wisconsin 53705-8366; telephone 608-261-4472; email at DSPSAdminRules@wisconsin.gov. Place where comments are to be submitted and deadline for submission:
Comments may be submitted to Dale Kleven, Administrative Rules Coordinator, Department of Safety and Professional Services, Division of Policy Development, 4822 Madison Yards Way, P.O. Box 8366, Madison, WI 53708-8366, or by email to DSPSAdminRules@wisconsin.gov. Comments must be received at or before the public hearing scheduled for 1:00 PM on April 21, 2020 to be included in the record of rule-making proceedings. ------------------------------------------------------------------------------------------------------------
TEXT OF RULE
section 1.
A-E 5.02 and (Note) are repealed.section 2.
A-E 5.03 (1) (e) is created to read:section 3.
A-E 5.03 (2) is amended to read:A-E 5.03 (2) Areas of experience. To qualify as satisfactory experience in the design of engineering systems under s. 443.07, Stats., the The experience of an applicant for a permit shall be substantially in the field or subfield for which the applicant has applied, and the experience shall demonstrate competence to be in charge of work in that specific field or subfield to the satisfaction of the section. Fields and subfield subfields are described in s. A-E 5.06. The experience shall be in areas of design practice designated under subs. (3) and (4), or other areas which, in to the opinion satisfaction of the board section, provide provides the applicant with knowledge or practice at least equivalent to that which what is generally acquired by experience in the areas listed. An applicant need not have experience in all areas of practice listed under subs. (3) and sub. (4). However, all applicants shall have experience in those areas listed in sub. (3) (a) and (b). Academic coursework which that provides the applicant with knowledge and skills in some of the areas of practice listed under subs. (3) and (4) may be claimed as equivalent to experience, in accordance with the limitations in s. 443.07 (2), Stats. section 4.
A-E 5.04 (1) (d) (intro.) and 1. to 6., (3), (5), (6), (7), (7) (Note), and (8) (a) are amended to read:A-E 5.04 (1) (d) (intro.) The examination for a permit in the subfield of private sewage onsite wastewater treatment systems as defined in s. 145.01 (12), Stats., requires an applicant to demonstrate competency in: 1. Knowledge of soils;.
2. Design of private sewage onsite wastewater treatment systems;.
3. Applicable administrative code and statutory provisions;.
4. Knowledge of applications and reports, including but not limited to soil boring and percolation reports;.
5. Mapping skills and interpretation;.
6. Knowledge of all systems in the subfield and design of the systems; and.
(3) Application for examination. An application for examination must be filed with the board section no later than 2 months before the scheduled date for the examination.
(5) Time, date and site of examinations. The examinations shall be held at a time, date and site specified by the board section.
(6) Grading of written examinations. The passing scores set by the board section represent the minimum competency required to protect public health and safety. An applicant's experience rating is not considered by the board section in grading the applicant's written examination.
(7) Reexamination procedure. An applicant for a designer examination who fails an examination or any part of an examination may retake any part of the examination failed at a regularly-scheduled administration of the examination. If an applicant fails to pass, on reexamination of the parts failed, or, the current examination parts equivalent to the parts failed, within 4 years from the date of receipt of the results of the first failure of the examination or any part of the examination, the applicant is required to take and pass the entire examination. If the applicant retakes the entire examination, the applicant shall pay the original examination fee under s. 440.05 (1), Stats. The board section shall determine which parts of a current examination are equivalent to the examination parts failed by an applicant. Note: Examination fees are available on the department’s website at dsps.wi.gov, or by request to the Department of Safety and Professional Services, P.O. Box 8935, Madison, WI 53708, or by calling call (608) 266 - 2112.
(8) (a) One-year limitation. An applicant for a designer examination may review questions on any part of an examination failed by the applicant within one year from the date of the examination, as specified in s. 443.09 (6), Stats. An applicant may review the examination only once.
section 5.
A-E 5.04 (8) (Note) is repealed.section 6.
A-E 5.06 (1), (2) (intro.) and (c), and (6) are amended to read:A-E 5.06 (1) Design services which may be performed by designers are the preparation of plans and specifications, consultation, investigation, and evaluation in connection with the preparation of plans and specifications in those fields and subfield subfields set forth in sub. (2).
(2) (intro.) Permits for the design of engineering systems shall be issued in the following fields and subfield subfields:
(c) The subfield of private sewage onsite wastewater treatment systems.
(6) (a) A master plumber's license restricted to private sewage onsite wastewater treatment systems issued pursuant to s. 145.14, Stats., shall be deemed equivalent to 4 years of approved experience in designing private sewage onsite wastewater treatment systems. The mathematics and mechanical science portions of the examination for the subfield of private sewage onsite wastewater treatment systems may be waived for an applicant who holds such the license. An applicant who does not hold such that license shall take the mathematics, mechanical science, and practice portions of the examination for the subfield of private sewage onsite wastewater treatment systems.
(b) A plumbing design permit in the subfield of private sewage onsite wastewater treatment systems shall be limited to the design of septic tanks for private sewage disposal onsite wastewater treatment systems, drain fields designed to serve such septic tanks, and the sewer service from the septic tank or sewer extensions from mains to the immediate inside or proposed inside foundation wall of the building.
section 7.
Effective Date. The rules adopted in this order shall take effect on the first day of the month following publication in the Wisconsin Administrative Register, pursuant to s. 227.22 (2) (intro.), Stats.------------------------------------------------------------------------------------------------------------
(END OF TEXT OF RULE)
------------------------------------------------------------------------------------------------------------
Dated _________________ Agency __________________________________
Chair
Examining Board of Architects, Landscape
Architects, Professional Engineers,
Designers, and Professional Land Surveyors
