Trans 256.02 Definitions.
Trans 256.03 Permit application.
Trans 256.04 Permit amendments.
Trans 256.05 Eligibility.
Trans 256.07 Registration requirements.
Trans 256.08 Driver and operating requirements.
Trans 256.09 Maximum size and loading limitations.
Trans 256.10 Flag requirements.
Trans 256.11 Times of operation.
Trans 256.12 Route limitations.
Trans 256.13 Power unit change.
Trans 256.14 Insurance and liability conditions.
Trans 256.15 General conditions and requirements.
Trans 256.16 Denial, suspension or revocation of permit.
Trans 256.01
Trans 256.01 Purpose. The purpose of this chapter is to establish standards and procedures for the issuance of single trip trailer-train permits, pursuant to s.
348.26 (3), Stats.
Trans 256.01 History
History: Cr.
Register, December, 1990, No. 420, eff. 1-1-91.
Trans 256.02(2)(a)
(a) “Issuing authority” means the department of transportation, or the officer in charge of maintenance of local highways.
Trans 256.02 Note
Note: The officer in charge of maintenance of local highways varies from jurisdiction to jurisdiction and may include the county highway commissioner; the city, town or village engineer; and the head of a city, town, or village transportation or public works department, or other person.
Trans 256.02 History
History: Cr.
Register, December, 1990, No. 420, eff. 1-1-91.
Trans 256.03(1)(1)
An application for a permit shall be submitted to an issuing authority on a form approved by the department, and in accordance with s.
348.26, Stats.
Trans 256.03(2)
(2) An application for a permit for the use of a state trunk highway shall be made to the department in any of the following ways:
Trans 256.03(3)
(3) An application for a permit for the use of a highway maintained by a local authority shall be submitted to the applicable local authority in the manner prescribed by the local authority. An application for a permit for the use of a state trunk highway within the geographical boundaries of a local authority shall be submitted to the applicable local authority in the manner prescribed by the local authority.
Trans 256.03 Note
Note: Permit application procedures are in s.
Trans 250.025 Trans 256.03 History
History: Cr.
Register, December, 1990, No. 420, eff. 1-1-91; correction in (2) (a) made under s.
13.92 (4) (b) 6., Stats.,
Register February 2013 No. 686.
Trans 256.04(1)(1)
An application for an amendment to a permit shall be made to the issuing authority which issued the original permit.
Trans 256.04(2)
(2) An application for an amendment may be made in the same manner as an application for an original permit.
Trans 256.04(3)
(3) The request shall specify the permit number of the permit to be amended.
Trans 256.04(4)
(4) A request for an extension of a permit may be made any time until the 3rd day after the expiration date of the permit.
Trans 256.04(5)
(5) An issuing authority may grant only one extension to a permit.
Trans 256.04(6)
(6) Except as provided in sub.
(7), a permit issued for less than 2 weeks may be extended not more than 2 weeks.
Trans 256.04(7)
(7) An issuing authority may extend a permit not more than 2 additional weeks where highway or other conditions remain unchanged, or as the issuing authority deems necessary.
Trans 256.04 Note
Note: Limitations on the amendment of permits are in s.
Trans 250.10.
Trans 256.04 History
History: Cr.
Register, December, 1990, No. 420, eff. 1-1-91.
Trans 256.05(1)(1)
Any vehicle or vehicle and load to be considered as operating under a permit shall satisfy the requirements for a permit under s.
348.25, Stats.
Trans 256.05(2)
(2) An issuing authority may issue a permit for empty trailer trains that are not reasonably divisible for purposes of movements to or from vehicle manufacturing, maintenance, repair, staging or terminal facilities.
Trans 256.05(3)
(3) An issuing authority may not issue a permit for wagons used in connection with seasonal agricultural industries.
Trans 256.05(4)
(4) A permit may not authorize the operation of more than 3 vehicles in combination.
Trans 256.05(5)
(5) An issuing authority may issue a permit only for a vehicle equipped with pneumatic tires.
Trans 256.05(6)
(6) The issuance of a permit is not a guarantee of the sufficiency of any highway or structure for the transporting of the vehicle, load, or vehicle and load.
Trans 256.05 History
History: Cr.
Register, December, 1990, No. 420, eff. 1-1-91.
Trans 256.06(1)(1)
A permit is valid only for the route specified in the permit, which may include the return trip on the reverse route if requested and approved, and which includes the movement of the empty vehicle, whether or not oversize or overweight, to and from the place of pickup or delivery of the permitted load.
Trans 256.06(2)
(2) A permit is valid only for the vehicle described in the application and permit.
Trans 256.06(3)
(3) A permit is valid only on the route specified in the permit.
Trans 256.06(4)
(4) An issuing authority may suspend a permit, or any of its conditions, because of seasonal highway conditions.
Trans 256.06 Note
Note: Spring thaw, flooding, and traffic congestion.
Trans 256.06(5)
(5) No condition of a permit may modify any law or regulation limiting loads because of local conditions, including load limits on bridges and highways, seasonal weight restrictions, or load limits imposed because of construction.
Trans 256.06(6)
(6) A permit is not valid during periods when adverse weather or road conditions, such as fog, smoke, heavy rain, snow or ice, or wind velocity, impair the safety of a movement under the permit.
Trans 256.06(7)
(7) A permit may not be used in combination with a multiple trip permit to authorize the movement of an oversize vehicle, load, or vehicle and load.
Trans 256.06 History
History: Cr.
Register, December, 1990, No. 420, eff. 1-1-91.
Trans 256.07(1)(1)
A vehicle operating under a permit shall be registered as required by Wisconsin Statutes, and shall be registered at not less than the permit weight or at the maximum available registration weight, whichever is less.
Trans 256.07(2)
(2) All other operational permits required by the department or other agencies having jurisdiction shall be obtained.
Trans 256.07 History
History: Cr.
Register, December, 1990, No. 420, eff. 1-1-91; correction in (2) made under s. 13.93 (2m) (b) 6., Stats.,
Register, August, 1996, No. 488.
Trans 256.08
Trans 256.08 Driver and operating requirements. Trans 256.08(1)(1)
The driver of a vehicle operating under a permit shall carry the permit in the vehicle to which it applies and shall have the permit available for inspection by any police officer, representative of the issuing authority, or person in charge of the maintenance of the highway being used.
Trans 256.08(2)
(2) The driver of a vehicle operating under a permit shall, whenever reasonable and practicable, maintain a distance of not less than 1,000 feet between the vehicle with the permit and any vehicle the driver is following, unless actually engaged in overtaking and passing another vehicle.
Trans 256.08(3)
(3) The driver of a vehicle operating under a permit shall allow traffic approaching or overtaking the permitted vehicle to pass, where it is safe to do so.
Trans 256.08(4)
(4) Unless a lower speed is specified in the permit, a vehicle operating under a permit may be operated at the posted speed limit.
Trans 256.08(5)
(5) The right wheels of the towed unit may not leave the roadway, except to allow traffic to pass.
Trans 256.08 Note
Note: A “roadway” does not include paved or unpaved shoulders. s.
340.01 (54), Stats.
Trans 256.08 History
History: Cr.
Register, December, 1990, No. 420, eff. 1-1-91.
Trans 256.09
Trans 256.09 Maximum size and loading limitations. Trans 256.09(1)(1)
The maximum size limitations authorized by a permit may not be exceeded.
Trans 256.09(2)
(2) The total length of trailer-trains consisting of truck-tractors, tractors, trailers, or semi-trailers operating under the terms of a permit, and the number of vehicles in the trailer-train authorized by the issuing authority may not be exceeded.
Trans 256.09(3)
(3) The overall length of the train of vehicles may not exceed 100 feet.
Trans 256.09(4)
(4) No vehicle in a trailer-train may be overheight or overwidth.
Trans 256.09 History
History: Cr.
Register, December, 1990, No. 420, eff. 1-1-91.
Trans 256.10(1)(1)
When a vehicle, load, or vehicle and load is overlength, 2 flags shall be fastened at the rear corners of the vehicle.
Trans 256.10(2)
(2) Each flag shall be solid red or orange in color, and not less than 18 inches square.
Trans 256.10(3)
(3) In order to wave freely, flags shall be securely fastened by at least one corner or securely mounted on a staff.
Trans 256.10 History
History: Cr.
Register, December, 1990, No. 420, eff. 1-1-91.
Trans 256.11(1)(1)
Except as otherwise specified in a permit, no vehicle or vehicle combination operating under a permit may operate:
