This is the preview version of the Wisconsin State Legislature site.
Please see http://docs.legis.wisconsin.gov for the production version.
SPS 383.25(2)(f)2.a. a. Existing POWTS treatment components.
SPS 383.25(2)(f)2.b. b. Existing POWTS holding components.
SPS 383.25(2)(f)2.c. c. Existing POWTS dispersal components.
SPS 383.25 Note Note: A municipality that issues building permits may delegate to the governmental unit responsible for issuing sanitary permits the determination of whether the proposed construction will affect or interfere with an existing POWTS relating to capability or location of the existing POWTS.
SPS 383.25 Note Note: See ch. SPS 383 Appendix for further information regarding setbacks.
SPS 383.25 History History: Cr. Register, April, 2000, No. 532, eff. 7-1-00; CR 02-129: am. (2) (a) Register January 2004 No. 577, eff. 2-1-04; CR 07-100: renum. (2) (e) to be (2) (f), cr. (2) (e) Register September 2008 No. 633, eff. 10-1-08; correction in (2) (b) 1., (d) 2., (f) 1. made under s. 13.92 (4) (b) 7., Stats., Register December 2011 No. 672; CR 17-065: am. (2) (b) (intro.), 1., (c) 1. (intro.), a., 2. (intro.), a., (d) 3. Register June 2018 No. 750, eff. 7-1-18.
SPS 383.255 SPS 383.255Governmental inventory and maintenance program.
SPS 383.255(1)(a)1.1. A governmental unit shall maintain an inventory of all POWTS located in its jurisdictional area.
SPS 383.255(1)(a)2. 2. The inventory shall be updated as existing POWTS are identified and new POWTS are installed or constructed.
SPS 383.255(1)(b) (b) At a minimum, a POWTS inventory shall consist of all of the following elements:
SPS 383.255(1)(b)1. 1. Legal description of all properties including tax parcel number where a POWTS is located within the governmental unit jurisdictional area.
SPS 383.255(1)(b)2. 2. Name and address of the owner of each POWTS located within the governmental unit jurisdictional area.
SPS 383.255 Note Note: The inventory does not require site visits, identification of the type of POWTS or an evaluation of the POWTS.
SPS 383.255(2)(a)(a) A governmental unit shall be responsible for administering a POWTS maintenance program.
SPS 383.255(2)(b) (b) At a minimum, a POWTS maintenance program shall consist of all of the following elements:
SPS 383.255(2)(b)1. 1. An inventory of all POWTS located within the governmental unit jurisdictional area.
SPS 383.255(2)(b)2. 2. A process that accepts and records inspection, evaluation, maintenance and servicing reports submitted by the POWTS owner or the owner's agent for POWTS listed in the governmental unit inventory.
SPS 383.255(2)(b)3. 3. A process that accepts and creates a record for each inspection, evaluation, maintenance and servicing report for a POWTS within the governmental unit jurisdictional area but not listed in the governmental unit inventory that is submitted by the POWTS owner or the owner's agent.
SPS 383.255(2)(b)4. 4. A process that notifies POWTS owners that are delinquent in submitting reports for inspection, evaluation, maintenance and servicing activities listed in ss. SPS 383.54 (3) and (4) and 383.55.
SPS 383.255(2)(b)5. 5. A process that includes measures meant to ensure that required inspection, evaluation, maintenance and servicing is performed and the results are reported to the governmental unit.
SPS 383.255(2)(b)6. 6. Reports summarizing the results of the maintenance program on an annual basis in a format requested by the department.
SPS 383.255(3) (3)A governmental unit shall make available to the department, upon request, any and all records necessary to ascertain compliance with this chapter and the provisions as specified in s. 145.20 (2) (i), Stats.
SPS 383.255 History History: CR 07-100: cr. Register September 2008 No. 633, eff. 10-1-08; correction in (2) (b) 4. made under s. 13.92 (4) (b) 7., Stats., Register December 2011 No. 672; CR 11-031: am. (1) (a) 1., (2) (a) Register June 2013 No. 690, eff. 7-1-13; CR 17-065: am. (1) (a) 1. Register June 2018 No. 750, eff. 7-1-18, am. (2) (a) Register June 2018 No. 750, eff. 10-1-19.
SPS 383.26 SPS 383.26Inspections and testing.
SPS 383.26(1)(a) (a) Pursuant to s. 145.02 (3) (c), Stats., the department or governmental unit may inspect the construction, installation, operation or maintenance of a POWTS to ascertain whether the POWTS conforms to plans approved by the department or governmental unit, the conditions of approval and this chapter.
SPS 383.26(1)(b) (b) The department may issue an order directing an immediate cessation of the installation of a POWTS or the modification to an existing POWTS for failure to comply with a corrective order.
SPS 383.26(1)(c) (c) Pursuant to ss. 145.02 (3) (f) and 145.20 (1) (a) and (2) (f), Stats., an individual authorized by the department or a governmental unit to administer and enforce this chapter may issue orders to abate human health hazards relating to this chapter.
SPS 383.26 Note Note: Section SPS 305.66 delineates qualifications and responsibilities for POWTS inspectors.
SPS 383.26(1)(d) (d) Pursuant to s. 145.20 (2) (e) and (g), Stats., nothing in this chapter shall limit a governmental unit's authority and power to inspect or require an evaluation of a POWTS, including an existing POWTS at times or for activities not covered under this section.
SPS 383.26(2)(a)(a) When a sanitary permit is required under s. SPS 383.21 (1), no part of a POWTS component may be covered nor any POWTS component put into service until the governmental unit or the department has had an opportunity to inspect the system in accordance with this subsection.
SPS 383.26 Note Note: Pursuant to s. 145.20 (2), Stats., an individual authorized by a governmental unit to administer and enforce the provisions of chs. SPS 382 to 387 relative to POWTS is required to be a certified POWTS inspector under s. SPS 305.66.
SPS 383.26(2)(b) (b) The master plumber or the master plumber-restricted service responsible for the installation of a POWTS or the modification to an existing POWTS shall notify the governmental unit when the work will be or is ready for inspection. The notification shall be in person, in writing or by telephone or other electronic communication in a format acceptable to the governmental unit performing the inspection.
SPS 383.26(2)(c) (c) The master plumber or the master plumber-restricted service responsible for the installation of a POWTS or the modification shall maintain records of the inspection notifications. The records shall include the date and time of notification and the name of the person contacted.
SPS 383.26(2)(d) (d) The master plumber or master plumber-restricted service responsible for the POWTS installation or modification shall provide the necessary equipment and properly licensed personnel required for the inspection as requested by the governmental unit or department.
SPS 383.26(2)(e) (e) If an inspection is not made by the end of the next workday, excluding Saturdays, Sundays and holidays, after the requested inspection day, the master plumber or the master plumber-restricted service may proceed with the installation of the POWTS, including backfilling and covering.
SPS 383.26(3) (3)Pursuant to s. 145.20 (2) (g), Stats., a governmental unit by ordinance may require other inspections in addition to that specified under this section.
SPS 383.26(4) (4)A governmental unit shall maintain a written record of each inspection conducted for a POWTS. The record shall include information relative to all of the following:
SPS 383.26(4)(a) (a) The location of the POWTS.
SPS 383.26(4)(b) (b) The date of the inspection.
SPS 383.26(4)(c) (c) The nature and findings of the inspection.
SPS 383.26(5) (5)Before being put into service, components of a POWTS shall be tested in accordance with the manufacturer's specifications or as specified as a condition of approval under ss. SPS 383.22 and 384.10.
SPS 383.26 History History: Cr. Register, April, 2000, No. 532, eff. 7-1-00; correction in (2) (a), (5) made under s. 13.92 (4) (b) 7., Stats., Register December 2011 No. 672.
SPS 383.27 SPS 383.27Experiments.
SPS 383.27(1)(1)The provisions of this chapter or ch. SPS 384 are not intended to prevent the design and use of an innovative method or concept for the treatment or dispersal of domestic wastewater which is not specifically addressed by this chapter, provided the experiment has been first approved by the department in accordance with s. SPS 384.50 (3).
SPS 383.27(2) (2)The department shall review a submittal of an experiment under this section with input from the technical advisory committee assembled under s. SPS 384.10 (3) (d).
SPS 383.27(3) (3)The protocol for a proposed experiment submitted to the department for consideration shall include all of the following:
SPS 383.27(3)(a) (a) The experiment shall be supervised by a professional who has experience in small-scale wastewater treatment.
SPS 383.27(3)(b) (b) The professional shall submit a vita of training and experience relative to small-scale wastewater treatment along with the application for the experiment.
SPS 383.27(3)(c) (c) A proposal shall be submitted for the experiment that includes at least all of the following:
SPS 383.27(3)(c)1. 1. The purpose of the experiment.
SPS 383.27(3)(c)2. 2. The theory and science behind the proposed experiment including a description of the systems or processes to be used as part of the experiment.
SPS 383.27(3)(c)3. 3. The number of systems or components to be installed or modified as part of the experiment.
SPS 383.27(3)(c)4. 4. The identification of the initial sites, if known, that will take part in the experiment.
SPS 383.27(3)(c)5. 5. A letter of comment from the governmental unit or units where the experiment is to be conducted.
SPS 383.27(3)(c)6. 6. The data to be collected and the method to be employed to collect the data.
SPS 383.27(3)(c)7. 7. The duration of the proposed experiment.
SPS 383.27(3)(d) (d) The experiment may not involve less than 5, and not more than 50 individual installations.
SPS 383.27(3)(e) (e) An experiment shall be designed to provide definitive results within 5 years from the start of the experiment.
SPS 383.27(3)(f) (f) An experiment on a site not previously developed shall include a contingency plan that provides for a code complying replacement POWTS, if the experiment fails to meet the required performance standards of this chapter.
SPS 383.27(3)(g) (g) If the experiment is approved, the experimenter shall execute a signed agreement with the department setting forth the obligations of the parties.
SPS 383.27(3)(h) (h) Within 6 months of the completion of the experiment, the results or conclusions shall be forwarded to the department.
SPS 383.27 History History: Cr. Register, April, 2000, No. 532, eff. 7-1-00; correction in (1), (2) made under s. 13.92 (4) (b) 7., Stats., Register December 2011 No. 672.
SPS 383.28 SPS 383.28Penalties. Penalties for violations of this chapter shall be assessed in accordance with s. 145.12, Stats.
SPS 383.28 History History: Cr. Register, April, 2000, No. 532, eff. 7-1-00.
SPS 383.29 SPS 383.29Range of responses.
SPS 383.29(1)(a) (a) Pursuant to s. 160.21, Stats., the department shall respond with any one or more of the actions delineated under Table 383.29 if the preventive action limits or enforcement standards enumerated in ch. NR 140 Tables 1 and 2 are exceeded at a point of standards application as a result of the performance of a POWTS, including a POWTS existing prior to July 1, 2000, except as provided in par. (b).
SPS 383.29(1)(b) (b) Pursuant to s. 160.255, Stats., the design, installation, use or maintenance of a POWTS is not required to comply with the nitrate standard specified in ch. NR 140 Table 1, except as provided under s. SPS 383.03 (5). - See PDF for table PDF
SPS 383.29(2) (2)Pursuant to s. 160.21 (2), Stats., the point of standards application relative to the performance of POWTS shall be:
SPS 383.29(2)(a) (a) Any point of present groundwater use for potable water supply; and
SPS 383.29(2)(b) (b) Any point beyond the boundary of the property on which the facility, practice or activity is located.
SPS 383.29 History History: Cr. Register, April, 2000, No. 532, eff. 7-1-00; CR 02-129: am. (1) (a) Register January 2004 No. 577, eff. 2-1-04; correction in (1) (a), (b), Table 383.29 made under s. 13.92 (4) (b) 7., Stats., Register December 2011 No. 672.
subch. III of ch. SPS 383 Subchapter III — General Requirements
SPS 383.30 SPS 383.30Purpose. This subchapter establishes parameters for the types of POWTS that may be used and how a POWTS may be used.
SPS 383.30 History History: Cr. Register, April, 2000, No. 532, eff. 7-1-00.
SPS 383.31 SPS 383.31Principles. A POWTS shall be operated and used in such a manner so as not to render the POWTS inoperative or beyond its capabilities, and thereby, create a human health hazard.
SPS 383.31 History History: Cr. Register, April, 2000, No. 532, eff. 7-1-00.
SPS 383.32 SPS 383.32Prohibitions and limitations.
SPS 383.32(1)(1)Prohibitions.
SPS 383.32(1)(a)(a) Except as provided in s. SPS 383.03 (4), the introduction of wastewater or substances in such quantities or concentrations to a POWTS, including a POWTS existing prior to July 1, 2000, that results in exceeding the enforcement standards and preventive action limits specified in ch. NR 140 Tables 1 and 2 at a point of standards application shall be prohibited.
SPS 383.32 Note Note: Section SPS 383.03 (4) reads:
SPS 383.32 Note (4) Groundwater standards. (a) Pursuant to s. 160.255, Stats., the design, installation, use or maintenance of a POWTS is not required to comply with the nitrate standard specified in ch. NR 140 Table 1, except as provided under sub. (5).
SPS 383.32(1)(b) (b) Pursuant to s. 160.19 (2) (a), Stats., the department has determined that it is not technically or economically feasible to require that a POWTS treat wastewater to comply with the preventive action limit for chloride specified in ch. NR 140, Table 2, as existed on June 1, 1998.
SPS 383.32(1)(c) (c) Substances deleterious to a POWTS shall be intercepted, diluted or treated in accordance with s. SPS 382.34 prior to the substance discharging into a POWTS.
Loading...
Loading...
Published under s. 35.93, Stats. Updated on the first day of each month. Entire code is always current. The Register date on each page is the date the chapter was last published.