RR 2.11 History
History: Cr.
Register, October, 1982, No. 322, eff. 11-1-82; am. (2) (intro.) and (3) to (6),
Register, August, 1986, No. 368, eff. 9-1-86.
RR 2.12
RR 2.12
Initial reports. Upon occurrence of any accident-incident in Wisconsin involving a railroad, resulting in death, substantial damages or significant hazard to the public, a report shall be made by the railroad involved to the office as soon as practicable but not later than within 24 hours of the occurrence or before 4 p.m. of the first business day following the occurrence.
RR 2.12 History
History: Renum. from PSC 72.02 (1) and am.
Register, October, 1982, No. 322, eff. 11-1-82; am.
Register, August, 1986, No. 368, eff. 9-1-86.
RR 2.13
RR 2.13
Monthly reports. The federal railroad administration in accordance with
49 CFR 225 Accident/Incident Reporting Standards requires each railroad company to submit a monthly report of railroad accidents-incidents. Each railroad company operating in Wisconsin shall submit to the office a copy of these applicable to its Wisconsin operation on or before the filing date as required by federal regulation.
RR 2.13 History
History: Renum. from PSC 72.03 and am.
Register, October, 1982, No. 322, eff. 11-1-82; am.
Register, August, 1986, No. 368, eff. 9-1-86.
RR 2.14
RR 2.14
Railroad clearances—general. Clearance standards established herein shall apply to each railroad operating in Wisconsin and lands adjacent to all railroad tracks with respect to new construction or reconstruction of tracks and structures and other conditions after the effective date of this chapter. Construction, installation and operation of electric power, communication and signal lines and equipment shall comply with the Wisconsin State Electrical Code designated as ch.
PSC 114. The exemptions referred to in this rule are not applicable to requirements of the Wisconsin State Electrical Code.
RR 2.14 History
History: Cr.
Register, February, 1965, No. 110, eff. 3-1-65; renum. from PSC 82.01 and am.
Register, October, 1982, No. 322, eff. 11-1-82.
RR 2.15(1)(1)
The horizontal clearance between the centers of adjacent and parallel tracks shall not be less than 14 feet.
RR 2.15(2)
(2) Except for railroad passenger platforms and railroad freight platforms, no structure shall be constructed or reconstructed on either side of any railroad track less than 8 feet 6 inches from the track center line; and a clear and unobstructed working space shall be maintained on both sides of any railroad track, not less than 8 feet 6 inches from the track center line.
RR 2.15(3)
(3) Platforms at passenger stations used for loading and unloading passengers, baggage, mail, and express may be constructed and maintained as follows:
RR 2.15(3)(a)
(a) Such a platform which is not higher than 4 inches above the top of the rail shall be not less than 4 feet 6 inches from the center line of the adjacent track;
RR 2.15(3)(b)
(b) Such a platform which is more than 4 inches but not higher than 8 inches above the top of the rail shall be not less than 5 feet 1 inch from the center line of the adjacent track;
RR 2.15(3)(c)
(c) Such a platform which is more than 8 inches but not higher than 1 foot 9 inches above the top of the rail shall be not less than 6 feet from the center line of the adjacent track;
RR 2.15(3)(d)
(d) Such a platform which is higher than 1 foot 9 inches above the top of the rail of a main track shall be not less than 8 feet from the center line thereof.
RR 2.15(4)
(4) Railroad freight platforms not more than 5 feet in height above the top of rail may be constructed with a clearance of not less than 6 feet 4 inches from the track center line of railroad tracks other than main line, yard lead, or industrial lead tracks, provided a clear and unobstructed working space of not less than 8 feet 6 inches from the track center line is maintained on the side of the track opposite such platforms.
RR 2.15(5)
(5) The minimum clearances standards in subs.
(1) through
(4) are for straight tracks and these minimum clearances shall be increased 1 inch for each degree of curvature when the track or tracks are curved.
RR 2.15(6)
(6) No structure which is less than 22 feet above the top of rail shall be constructed or reconstructed over a railroad track or over the area 8 feet 6 inches from the track center line on each side of a railroad track.
RR 2.15 History
History: Renum. from PSC 82.02, 82.03, 82.04 and 82.05 and am. (5),
Register, October, 1982, No. 322, eff. 11-1-82.
RR 2.16(1)(1)
Materials used by a railroad for repair or construction just prior to and during the period such work is in progress, and railroad structures and facilities necessary for the operations of trains for which it is impracticable to provide the minimum clearances, are exempted from the provisions of s.
RR 2.15 (2) to
(5).
RR 2.16(2)
(2) Upon written application and after public hearing, the office may grant exemption from the clearances requirements of this chapter upon a finding that the clearances proposed does not imperil life or limb and that public interest requires or permits such clearance. The findings and order granting exemption shall be in writing and shall contain complete provisions and requirements as to the clearances to be maintained.
RR 2.16(3)
(3) Wherever any overhead structure or any part thereof is less than 22 feet above the top of the rail, every railroad corporation or industry shall maintain telltales of suitable construction installed over each track at such distances from the obstruction as shall provide adequate security against accident; except that if the office finds that the installation of a telltale at any particular place would be impracticable or would result in any increased hazard to either the public or an employe and that either or both such factors outweigh the safety benefit which would result from the installation of a telltale, the office may enter an order providing an exemption from this subsection. Such exemption shall be ordered by the office only after written application and public hearing.
RR 2.16 History
History: Cr.
Register, February, 1965, No. 110, eff. 3-1-65; renum. from PSC 82.06,
Register, October, 1982, No. 322, eff. 11-1-82; am.
Register, August, 1986, No. 368, eff. 9-1-86; am. (1),
Register, May, 1996, No. 485, eff. 6-1-96.
RR 2.17
RR 2.17
Motor vehicles—general. RR 2.17(1)(1)
Section
RR 2.17 prescribes minimum standards for the transportation of employes by motor vehicles to and from their places of employment and during the course of their employment and shall be observed by all railroads in their operations within the state of Wisconsin.
RR 2.17(2)
(2) The intent of the rules will be realized a) by applying the rules in full to all new motor vehicles and related items or equipment when placed in service, b) by applying all except s.
RR 2.18 (1),
(2),
(3),
(5), and
(6) to existing vehicles, c) by applying all rules where there is major reconstruction of the vehicles and to those parts used as replacements in the partial reconstruction of a vehicle, d) these regulations shall not apply to taxicabs or other vehicles licensed by competent authority to transport the public, and used by a railroad to transport its employes.
RR 2.17(3)
(3) All motor vehicles and related items or equipment shall be designed for use in the manner contemplated in these rules.
RR 2.17(4)
(4) Motor vehicles and related items or equipment shall be cleaned when necessary and inspected at such intervals as experience has shown to be necessary. Any motor vehicle or related items or equipment found or known to be defective so as to endanger life or property shall be promptly repaired or taken out of service until repairs can be made. Repairs shall be made by competent persons. Compartments for employes shall be kept in a reasonably clean and sanitary condition, and employes shall cooperate in maintaining such conditions.
RR 2.17(5)
(5) It is recognized that these regulations cannot cover all contingencies, and accordingly the office may, on application or on its own motion, modify, grant exceptions to, or prescribe higher standards than the rules contained in this chapter.
RR 2.17(6)
(6) In times of emergency, if approved vehicles are not available, vehicles not complying with these regulations may be used. An emergency shall be considered as existing when rail traffic has been stopped or disrupted (or where there is a threat of stoppage or disruption) because of derailment, accident, disastrous storm, fire, flood or other similar condition. Ordinarily weather conditions including usual storms especially in winter shall not be considered to call for emergency operation.
RR 2.17(7)
(7) As used in these rules, unless the context requires otherwise:
RR 2.17(7)(a)
(a) “Employe" means an individual employed for any period in any work for which he is compensated by a rail common carrier.
RR 2.17(7)(b)
(b) “Employer" means a railroad common carrier who employs one or more employes.
RR 2.17(7)(c)
(c) “Heating facilities" means a hot water radiator type system, or any other generally acceptable form of heating which does not emit nauseous fumes or gases into the vehicle.
RR 2.17(7)(d)
(d) “Material" means all items that can be lawfully transported by motor vehicles.
RR 2.17(7)(e)
(e) “Motor vehicle" means any vehicle which is self-propelled and designed primarily for highway use, and which may or may not be equipped with retractable flange wheels for operation on railroad tracks.
RR 2.17(7)(f)
(f) “Rear compartment" means a crew cab which may be a continuation of the driver's cab, providing additional seating facilities, or an auxiliary cab located directly behind the driver's cab.
RR 2.17(7)(g)
(g) “Seating facilities" means seats provided for workers other than the driver.
RR 2.17(7)(h)
(h) “Tools" means hand or power-driven instruments and machines used in the efficient prosecution of a trade or calling.
RR 2.17 History
History: Cr.
Register, September, 1970, No. 177, eff. 10-1-70; renum. from PSC 85.01 (2), 85.02, 85.03 (2) to (6), (9) to (11), and am. (1),
Register, October, 1982, No. 322, eff. 11-1-82; am. (5),
Register, August, 1986, No. 368, eff. 9-1-86; am. (1), (2),
Register, May, 1996, No. 485, eff. 6-1-96.
RR 2.18(1)(1)
A rear compartment may be either a continuation cab or an auxiliary cab.
RR 2.18(2)
(2) A continuation cab is a standard crew cab as designed and furnished by the motor vehicle manufacturer or as constructed by a motor vehicle body company which is a continuance of the driver's cab, of equal strength, all welded construction. In this type of cab, no communication system between the rear compartment and the driver is required.
RR 2.18(3)
(3) An auxiliary cab is a rear compartment separated from the driver's cab. It shall be of metal construction (including top), welded or riveted, with interior lining, equipped with adequate padded seats and back rests firmly secured in place. It shall be fastened directly to the frame of the motor vehicle and not to the surface of the bed of the vehicle. When necessary, it shall be equipped with steps and hand holds.
RR 2.18(4)
(4) A system of communication between an auxiliary cab and the driver shall be provided and said communication system must be kept in good working condition at all times.
RR 2.18(5)
(5) Both types of cabs shall be provided with a heating system for cold weather and a ventilation system for hot weather, providing heat and ventilation substantially equal to that provided for the driver. Exhaust systems shall be so designed as to prevent exhaust fumes from entering the rear compartment. Heavy-duty hinge-type doors shall be provided, equipped with automotive-type safety latches. All windows shall be of safety glass, as required by law. Where a compartment is equipped with only one door, at least one window shall be of the “knock-out" type and of sufficient size to provide emergency exit for the employes. All vehicles shall have adequate seating capacity for the number of employes carried.
RR 2.18(6)
(6) Canvas-covered truck beds or shelters built of wood, plywood or light-gauge metal on the bed of the truck shall not be considered as a rear compartment. The vehicles shall be especially built or modified for transporting employes in compartments separate from space used to transport tools, material and equipment for the employes.
RR 2.18 History
History: Cr.
Register, September, 1970, No. 177, eff. 10-1-77; renum. from PSC 85.04,
Register, October, 1982, No. 322, eff. 11-1-82.
RR 2.19
RR 2.19
Safety equipment required. RR 2.19(1)(1)
All vehicles used for the transportation of employes shall carry an adequate first-aid kit suitable for the number of employes transported.
RR 2.19(2)
(2) Each vehicle used to transport employes shall be equipped with either a 2-pound dry chemical type, or a 4-pound carbon dioxide type fire extinguisher approved by the Underwriters Laboratories, Inc. These are minimum capacities. Toxic vaporizing liquid type fire extinguishers, such as those containing carbon tetrachloride or chlorobromomethane, will not be permitted.
RR 2.19(3)
(3) Racks, boxes, holsters or equivalent means shall be provided and arranged so employes will not be endangered by tools or equipment being transported, loaded or removed.
RR 2.19(4)
(4) To prevent materials being transported on flatbed trucks from shifting against cab or rear compartment, a suitable front endgate must be provided.
RR 2.19 History
History: Cr.
Register, September, 1970, No. 177, eff. 10-1-70; renum. from PSC 85.05,
Register, October, 1982, No. 322, eff. 11-1-82.
RR 2.20
RR 2.20
Drivers, operation, employe's duties. RR 2.20(1)(1)
Only authorized, experienced, competent, qualified and licensed drivers not less than 18 years of age who satisfy the minimum standards for drivers established by the division of motor vehicles shall be permitted to operate vehicles used to transport employes.
RR 2.20(2)
(2) The motor vehicles shall not carry railroad passengers or non-employes, except in an emergency. Persons having a work contact with the railroad or governmental inspection personnel may be carried.
RR 2.20(3)
(3) When the driver's compartment is separate from the compartment used to transport employes, the signals adopted for use on the communication system shall be simple and understood by both driver and employes.
RR 2.20(4)
(4) No vehicle shall be loaded beyond its safe carrying capacity, or beyond its licensed capacity when in use on public streets or highways. No motor vehicle shall be driven if it is so loaded, or if the load thereon is so distributed or so inadequately secured as to prevent safe operation.
RR 2.20(5)
(5) No motor vehicle shall be driven when anything in, on or attached to the vehicle obscures the driver's view ahead or to either side, or interferes with the free movement of his arms or legs, or prevents his free and ready access to his controls and emergency equipment, or prevents the free and ready exit of any person from the vehicle.
RR 2.20(6)
(6) All vehicles transporting employes shall observe all motor vehicle laws of the state.
RR 2.20(7)
(7) No explosives (except flagging equipment) shall be hauled on any vehicle while it is engaged in transporting employes. This rule shall not prohibit the driver and one qualified powder man from riding in a vehicle in which explosives are being hauled.
RR 2.20(8)
(8) Gasoline and other low flash point liquids shall not be hauled in vehicles transporting employes except when in department of industry, labor and human relations approved safety containers or in containers meeting with the current specifications of the United States department of transportation. Such containers shall be carried in a safe, suitable location outside the passenger compartment as far from the compartment as possible, firmly secured to prevent shifting, and where they will not block exit from the vehicle.
RR 2.20(9)
(9) Occupants shall not ride with any part of their bodies extending out over the side of the vehicle.
RR 2.20(10)
(10) Employes wearing equipment which might injure a fellow employ (spurs, exposed sharp tools, and the like) shall remove such equipment before entering any vehicle in which employes are being transported.
RR 2.20(11)
(11) Scuffling or horseplay while riding in any vehicle is prohibited.
RR 2.20(12)
(12) Any hazardous condition or defect of a motor vehicle or unsafe practice of the driver or employes riding in vehicles used to transport employes shall be reported in writing to the employer or supervisor as soon as possible by any employe having knowledge of such conditions.
RR 2.20 History
History: Cr.
Register, September, 1970, No. 177, eff. 10-1-70; renum. from PSC 85.06,
Register, October, 1982, No. 322, eff. 11-1-82.
