NR 667.0199 What inspection requirements shall I meet?
NR 667.0200 What shall I do in case of a leak or a spill?
NR 667.0201 What shall I do when I stop operating the tank system?
NR 667.0202 What special requirements shall I meet for ignitable or reactive wastes?
NR 667.0203 What special requirements shall I meet for incompatible wastes?
NR 667.0204 What air emission standards apply?
Subchapter DD — Containment Buildings
NR 667.1100 Does this subchapter apply to me?
NR 667.1101 What design and operating standards shall my containment building meet?
NR 667.1102 What other requirements shall I meet to prevent releases?
NR 667.1103 What additional design and operating standards apply if liquids will be in my containment building?
NR 667.1104 How may I obtain a waiver from secondary containment requirements?
NR 667.1105 What shall I do if my containment building contains areas both with and without secondary containment?
NR 667.1106 What shall I do if I detect a release?
NR 667.1107 Can a containment building itself be considered secondary containment?
NR 667.1108 What shall I do when I stop operating the containment building?
NR 667.0001
NR 667.0001 Purpose, scope, and applicability. NR 667.0001(1)(1)
The purpose of this chapter is to establish minimum standards which define the acceptable management of hazardous waste under a subch.
J of ch. NR 670 standardized license.
NR 667.0001 History
History: CR 16-007: cr.
Register July 2017 No. 739, eff. 8-1-17; correction in (1), (2) made under s.
35.17, Stats., and correction in (2) made under s.
13.92 (4) (b) 7., Stats.,
Register July 2017 No. 739.
NR 667.0002
NR 667.0002 What is the relationship to interim license standards? If you are a facility owner or operator who has fully complied with the requirements for an interim license, as defined in s.
NR 670.002 (13) and rules under s.
NR 670.070, comply with the rules specified in ch.
NR 665 instead of the rules in this chapter, until final administrative disposition of the standardized license application is made, except as provided under subch.
S of ch. NR 664.
NR 667.0002 History
History: CR 16-007: cr.
Register July 2017 No. 739, eff. 8-1-17; correction made under s.
35.17, Stats.,
Register July 2017 No. 739.
NR 667.0003
NR 667.0003 How does this chapter affect an imminent hazard action? Notwithstanding any other provisions of this chapter, enforcement actions may be brought pursuant to
42 USC 6973 (a) and chs.
289 and
291, Stats., and other applicable laws.
NR 667.0010
NR 667.0010 Does this subchapter apply to me? This subchapter applies to owner or operators of a facility that treats or stores hazardous waste under a subch.
J of ch. NR 670 standardized license, except as provided in s.
NR 667.0001 (2).
NR 667.0010 History
History: CR 16-007: cr.
Register July 2017 No. 739, eff. 8-1-17; corrections made under ss.
13.92 (4) (b) 7. and
35.17, Stats.,
Register July 2017 No. 739.
NR 667.0011
NR 667.0011 What shall I do to comply with this subchapter? To comply with this subchapter, obtain an identification number, and follow the requirements below for waste analysis, security, inspections, training, special waste handling, and location standards.
NR 667.0011 History
History: CR 16-007: cr.
Register July 2017 No. 739, eff. 8-1-17.
NR 667.0012 History
History: CR 16-007: cr.
Register July 2017 No. 739, eff. 8-1-17.
NR 667.0013
NR 667.0013 What are the waste analysis requirements? NR 667.0013(1)(1)
Before treating or storing any hazardous wastes, obtain a detailed chemical and physical analysis of a representative sample of the wastes. At a minimum, the analysis shall contain all the information needed to treat or store the waste to comply with this chapter and ch.
NR 668.
NR 667.0013(1)(a)
(a) You may include data in the analysis that was developed under ch.
NR 661, and published or documented data on the hazardous waste or on hazardous waste generated from similar processes.
NR 667.0013(1)(b)
(b) Repeat the analysis as necessary to ensure that it is accurate and up to date. At a minimum, repeat the analysis if the process or operation generating the hazardous wastes has changed.
NR 667.0013(2)
(2) Develop and follow a written waste analysis plan that describes the procedures you will follow to comply with sub.
(1). Keep the waste analysis plan at the facility. If you receive wastes generated from off-site and are eligible for a standardized license, you also shall have submitted the waste analysis plan with the notice of intent. At a minimum, the plan shall specify all of the following:
NR 667.0013(2)(a)
(a) The hazardous waste parameters that you will analyze and the rationale for selecting these parameters (that is, how analysis for these parameters will provide sufficient information on the waste's properties to comply with sub.
(1)).
NR 667.0013(2)(c)
(c) The sampling method you will use to obtain a representative sample of the waste to be analyzed. You may obtain a representative sample using either:
NR 667.0013(2)(d)
(d) How frequently you will review or repeat the initial analysis of the waste to ensure that the analysis is accurate and up to date.
NR 667.0013 History
History: CR 16-007: cr.
Register July 2017 No. 739, eff. 8-1-17; correction in (2) (c) 1. made under s.
35.17, Stats.,
Register July 2017 No. 739.
NR 667.0014
NR 667.0014 What are the security requirements? NR 667.0014(1)(1)
Prevent, and minimize the possibility for, livestock and unauthorized people from entering the active portion of your facility.
NR 667.0014(2)
(2) Your facility shall have the security requirements in either (a) or (b), and the controlled entry requirement in (c):
NR 667.0014(2)(a)
(a) A 24-hour surveillance system (for example, television monitoring or surveillance by guards or facility personnel) that continuously monitors and controls entry onto the active portion of the facility.
NR 667.0014(2)(b)
(b) An artificial or natural barrier (for example, a fence in good repair or a fence combined with a cliff) that completely surrounds the active portion of the facility.
NR 667.0014(2)(c)
(c) A means to control entry, at all times, through the gates or other entrances to the active portion of the facility (for example, an attendant, television monitors, locked entrance or controlled roadway access to the facility).
NR 667.0014(3)
(3) Post a sign at each entrance to the active portion of a facility, and at other prominent locations, in sufficient numbers to be seen from any approach to this active portion. The sign shall bear the legend “Danger—Unauthorized Personnel Keep Out.” The legend shall be in English and in any other language predominant in the area surrounding the facility, and shall be legible from a distance of at least 25 feet. You may use existing signs with a legend other than “Danger—Unauthorized Personnel Keep Out” if the legend on the sign indicates that only authorized personnel are allowed to enter the active portion and that entry onto the active portion can be dangerous.
NR 667.0014 History
History: CR 16-007: cr.
Register July 2017 No. 739, eff. 8-1-17.
NR 667.0015
NR 667.0015 What are the general inspection requirements? NR 667.0015(1)(1)
Inspect your facility for malfunctions and deterioration, operator errors, and discharges that may be causing, or may lead to either:
NR 667.0015(1)(b)
(b) A threat to human health. Conduct the inspections often enough to identify problems in time to correct them before they result in harm to human health or the environment.
NR 667.0015(2)
(2) Develop and follow a written schedule for inspecting, monitoring equipment, safety and emergency equipment, and security devices (such as dikes and sump pumps) that are important to preventing, detecting, or responding to environmental or human health hazards.
NR 667.0015(2)(b)
(b) The schedule shall identify the equipment and devices you will inspect and what problems you look for, such as malfunctions or deterioration of equipment (for example, inoperative sump pump or leaking fitting).
NR 667.0015(2)(c)
(c) The frequency of your inspections may vary for the items on the schedule. However, the frequency should be based on the rate of deterioration of the equipment and the probability of an environmental or human health incident if the deterioration, malfunction, or any operator error goes undetected between inspections. Areas subject to spills, such as loading and unloading areas, shall be inspected daily when in use. At a minimum, the inspection schedule shall include the items and frequencies required in ss.
NR 667.0174,
667.0193,
667.0195,
667.1103 and
664.1033,
664.1052,
664.1053,
664.1058, and
664.1083 to
664.1089, where applicable.
NR 667.0015(3)
(3) Remedy any deterioration or malfunction of equipment or structures that the inspection reveals in time to prevent any environmental or human health hazard. Where a hazard is imminent or has already occurred, take remedial action immediately.
NR 667.0015(4)
(4) Record all inspections and keep the records for at least 3 years from the date of inspection. At a minimum, include the date and time of the inspection, the name of the inspector, a notation of the observations made and the date and nature of any repairs or other remedial actions.
NR 667.0015 History
History: CR 16-007: cr.
Register July 2017 No. 739, eff. 8-1-17.
NR 667.0016
NR 667.0016 What training shall my employees have? NR 667.0016(1)(1)
Your facility personnel shall successfully complete a program of classroom instruction or on-the-job training that teaches them to perform their duties in a way that ensures the facility's compliance with the requirements of this chapter. Ensure that this program includes all the elements described in the documents that are required under sub.
(4) (c).
NR 667.0016(1)(a)
(a) A person trained in hazardous waste management procedures shall direct this program, and shall teach facility personnel hazardous waste management procedures (including contingency plan implementation) relevant to their employment positions.
NR 667.0016(1)(b)
(b) At a minimum, the training program shall be designed to ensure that facility personnel are able to respond effectively to emergencies by including instruction on emergency procedures, emergency equipment and emergency systems, including all of the following, where applicable:
NR 667.0016(1)(b)1.
1. Procedures for using, inspecting, repairing, and replacing facility emergency and monitoring equipment.
NR 667.0016(2)
(2) Facility personnel shall complete the program required in sub.
(1) within six months after the date of their employment or assignment to a facility, or to a new position at a facility, whichever is later. Employees hired after the effective date of your standardized license may not work in unsupervised positions until they have completed the training requirements of sub.
(1).
NR 667.0016(3)
(3) Facility personnel shall take part in an annual review of the initial training required in sub.
(1).
NR 667.0016(4)
(4) Maintain the following documents and records at your facility:
NR 667.0016(4)(a)
(a) The job title for each position at the facility related to hazardous waste management and the name of the employee filling each job.
NR 667.0016(4)(b)
(b) A written job description for each position listed under par.
(a). The description shall include the requisite skill, education, or other qualifications and duties of employees assigned to each position.
NR 667.0016(4)(c)
(c) A written description of the type and amount of both introductory and continuing training that will be given to each person filling a position listed under par.
(a).
NR 667.0016(4)(d)
(d) Records documenting that facility personnel have received and completed the training or job experience required under subs.
(1) to
(3).
NR 667.0016(5)
(5) Keep training records on current personnel until your facility closes. Keep training records on former employees for at least 3 years from the date the employee last worked at your facility. Personnel training records may accompany personnel transferred within your company.
NR 667.0016 History
History: CR 16-007: cr.
Register July 2017 No. 739, eff. 8-1-17.
NR 667.0017
NR 667.0017 What are the requirements for managing ignitable, reactive or incompatible wastes? NR 667.0017(1)(1)
Take precautions to prevent accidental ignition or reaction of ignitable or reactive waste by following these requirements:
NR 667.0017(1)(a)
(a) Separate these wastes and protect them from sources of ignition or reaction, such as open flames, smoking, cutting and welding, hot surfaces, frictional heat, sparks (static, electrical, or mechanical), spontaneous ignition (for example, from heat-producing chemical reactions), and radiant heat.
NR 667.0017(1)(b)
(b) While ignitable or reactive waste is being handled, confine smoking and open flames to specially designated locations.
NR 667.0017(1)(c)
(c) “No Smoking” signs shall be conspicuously placed wherever there is a hazard from ignitable or reactive waste.
