NR 405.02(2m)(b)
(b) For an existing emissions unit, other than an electric utility steam generating unit, baseline actual emissions means the average rate, in tons per year, at which the emissions unit actually emitted the air contaminant during any consecutive 24-month period selected by the owner or operator within the 10-year period immediately preceding either the date the owner or operator begins actual construction of the project, or, the date a complete permit application is received by the department for a permit required under
ch. NR 406 or for a permit revision under
ch. NR 407, whichever is earlier, except that the 10-year period may not include any period earlier than November 15, 1990.
NR 405.02(2m)(b)1.
1. The average rate shall include fugitive emissions to the extent quantifiable, and emissions associated with startups, shutdowns and malfunctions.
NR 405.02(2m)(b)2.
2. The average rate shall be adjusted downward to exclude any emissions in excess of an emission limitation that was legally enforceable during the consecutive 24-month period.
NR 405.02(2m)(b)3.
3. The average rate shall be adjusted downward to exclude any emissions that would have exceeded an emission limitation with which the major stationary source must currently comply, had the major stationary source been required to comply with the limitation during the consecutive 24-month period. However, if an emission limitation is part of a maximum achievable control technology standard that the administrator proposed or promulgated under
40 CFR part 63, the baseline actual emissions need only be adjusted if the state has taken credit for the emissions reductions in an attainment demonstration or maintenance plan consistent with the requirements of
s. NR 408.06 (9).
NR 405.02(2m)(b)4.
4. For a regulated NSR air contaminant, when a project involves multiple emissions units, only one consecutive 24-month period may be used to determine the baseline actual emissions for the emissions units being changed. A different consecutive 24-month period may be used for each regulated NSR air contaminant.
NR 405.02(2m)(b)5.
5. The average rate may not be based on any consecutive 24-month period for which there is inadequate information for determining annual emissions, in tons per year, or for adjusting this amount if required by
subds. 2. and
3.
NR 405.02(2m)(c)
(c) For a new emissions unit, the baseline actual emissions for purposes of determining the emissions increase that will result from the initial construction and operation of the unit shall equal zero; and thereafter, for all other purposes, shall equal the unit's potential to emit.
NR 405.02(2m)(d)
(d) For a PAL for a stationary source, the baseline actual emissions shall be calculated for existing electric utility steam generating units in accordance with the procedures contained in
par. (a), for other existing emissions units in accordance with the procedures contained in
par. (b), and for a new emissions unit, in accordance with the procedures contained in
par. (c).
NR 405.02(3)
(3) “Baseline area" means any intrastate area, and every part thereof, designated as attainment or unclassifiable under section 107 (d) (1) (A) (ii) or (iii) of the Act (
42 USC 7407 (d) (1) (A) (ii) or (iii)) in which the major source or major modification establishing the minor source baseline date would construct or would have an air quality impact for the pollutant for which the baseline date is established equal to or greater than 1
mg/m
3 (annual average) for SO
2, NO
2, or PM
10, or equal to or greater than 0.3
mg/m
3 (annual average) for PM
2.5. Area redesignations under section 107 (d) (1) (A) (ii) or (iii) of the Act (
42 USC 7407 (d) (1) (A) (ii) or (iii)) cannot intersect or be smaller than the area of impact of any major stationary source or major modification which either establishes a minor source baseline date or is subject to this chapter.
NR 405.02(4)(a)(a) “Baseline concentration" means that ambient concentration level which exists in the baseline area at the time of the applicable minor source baseline date. A baseline concentration is determined for each air contaminant for which a minor source baseline date is established and shall include:
NR 405.02(4)(a)1.
1. The actual emissions representative of sources in existence on the applicable minor source baseline date, except as provided in
par. (b).
NR 405.02(4)(a)2.
2. The allowable emissions of major stationary sources which commenced construction before the major source baseline date, but were not in operation by the applicable minor source baseline date.
NR 405.02(4)(b)
(b) The following will not be included in the baseline concentration and will affect the applicable maximum allowable increases:
NR 405.02(4)(b)1.
1. Actual emissions from any major stationary source on which construction commenced after the major source baseline date.
NR 405.02(4)(b)2.
2. Actual emissions increases and decreases at any stationary source occurring after the minor source baseline date.
NR 405.02(6)
(6) “Begin actual construction" means, in general, initiation of physical on-site construction activities on an emissions unit which are of a permanent nature. Such activities include, but are not limited to, installation of building supports and foundations, laying of underground pipework and construction of permanent storage structures. With respect to a change in method of operation, this term refers to those on-site activities, other than preparatory activities, which mark the initiation of the change.
NR 405.02(7)
(7) “Best available control technology" or “BACT" means an emissions limitation, including a visible emissions standard, based on the maximum degree of reduction for each air contaminant subject to regulation under the Act which would be emitted from any proposed major stationary source or major modification which the department, on a case-by-case basis, taking into account energy, environmental, and economic impacts, and other costs, determines is achievable for such source or modification through application of production processes or available methods, systems, and techniques, including clean fuels, fuel cleaning or treatment or innovative fuel combination techniques for control of the air contaminant. In no event may application of best available control technology result in emissions of any air contaminant which would exceed the emissions allowed by any applicable standard under
chs. NR 440 and
445 to
449 and under sections 111 and 112 of the Act (
42 USC 7411 and
7412). Emissions from any source utilizing clean fuels or any other means to comply with this subsection may not be allowed to increase above the levels that would have been required under this subsection as it existed prior to enactment of the 1990 clean air Act amendments on November 15, 1990. If the department determines that technological or economic limitations on the application of measurement methodology to a particular emissions unit would make the imposition of an emissions standard infeasible, a design, equipment, work practice, operational standard or combination thereof, may be prescribed instead to satisfy the requirement for the application of best available control technology. The standard shall, to the degree possible, set forth the emissions reduction achievable by implementation of such design, equipment, work practice or operation, and shall provide for compliance by means which achieve equivalent results.
NR 405.02(8)
(8) “Building, structure, facility or installation" or “facility, building, structure, equipment, vehicle or action" means all of the activities which emit or may emit a regulated NSR air contaminant, belong to the same industrial grouping, are located on one or more contiguous or adjacent properties, and are under the control of the same person, or persons under common control, except the activities of any vessel. Regulated NSR air contaminant emitting activities shall be considered as part of the same industrial grouping if they are classified under the same 2-digit major group as described in the Standard Industrial Classification Manual, 1987, incorporated by reference in
s. NR 484.05.
NR 405.02(8m)
(8m) “Clean coal technology" means any technology, including technologies applied at the precombustion, combustion, or post combustion stage, at a new or existing facility which will achieve significant reductions in air emissions of sulfur dioxide or oxides of nitrogen associated with the utilization of coal in the generation of electricity, or process steam, which was not in widespread use as of November 15, 1990.
NR 405.02(8s)
(8s) “Clean coal technology demonstration project" means a project using funds appropriated under the heading `Department of Energy-Clean Coal Technology', up to a total amount of $2,500,000,000 for commercial demonstration of clean coal technology, or similar projects funded through appropriations for the U.S. environmental protection agency. The federal contribution for a qualifying project shall be at least 20% of the total cost of the demonstration project.
NR 405.02(9)
(9) “Commence" as applied to construction of a major stationary source or major modification means that the owner or operator has all necessary preconstruction approvals or permits and has done one of the following:
NR 405.02(9)(a)
(a) Begun, or caused to begin, a continuous program of actual on-site construction of the source, to be completed within a reasonable time.
NR 405.02(9)(b)
(b) Entered into binding agreements or contractual obligations, which cannot be canceled or modified without substantial loss to the owner or operator, to undertake a program of actual construction of the source to be completed within a reasonable time.
NR 405.02(10)
(10) “Complete" means, in reference to an application for a permit, that the application contains all the information necessary for processing the application. Designating an application complete for purposes of permit processing does not preclude the department from requesting or accepting any additional information.
NR 405.02(11)
(11) “Construction" means any physical change or change in the method of operation, including fabrication, erection, installation, demolition, or modification of an emissions unit, which would result in a change in emissions.
NR 405.02(11c)
(11c) “Continuous emissions monitoring system" or “CEMS" means all of the equipment that may be required to meet the data acquisition and availability requirements of this chapter, to sample, condition if applicable, analyze and provide a record of emissions on a continuous basis.
NR 405.02(11e)
(11e) “Continuous emissions rate monitoring system" or “CERMS" means the total equipment required for the determination and recording of the air contaminant mass emissions rate in terms of mass per unit of time.
NR 405.02(11j)
(11j) “Continuous parameter monitoring system" or “CPMS" means all of the equipment necessary to meet the data acquisition and data availability requirements of this chapter to monitor process and control device operational parameters, and to record average operational parameter values on a continuous basis.
NR 405.02 Note
Note: Process and control device operational parameters include secondary voltages and electric currents, and other information, such as gas flow rate, O2 or CO2 concentrations.
NR 405.02(11m)
(11m) “Electric utility steam generating unit" means any steam electric generating unit that is constructed for the purpose of supplying more than one-third of its potential electric output capacity and more than 25 MW electrical output to any utility power distribution system for sale. Any steam supplied to a steam distribution system for the purpose of providing steam to a steam-electric generator that would produce electrical energy for sale is also considered in determining the electrical energy output capacity of the affected facility.
NR 405.02(12)
(12) “Emissions unit" means any part of a stationary source which emits or would have the potential to emit any regulated NSR air contaminant and includes an electric utility steam generating unit. For purposes of this chapter, there are 2 types of emissions units described as follows:
NR 405.02(12)(a)
(a) A new emissions unit is any emissions unit which is or will be newly constructed and which has existed for less than 2 years from the date the emissions unit first operated.
NR 405.02(12)(b)
(b) An existing emissions unit is any emissions unit that does not meet the requirements in
par. (a). Notwithstanding
par. (a), a replacement unit, as defined in
sub. (25k), is an existing emissions unit.
NR 405.02(13)
(13) “Federal land manager" means, with respect to any lands in the United States, the secretary of the department with authority over such lands.
NR 405.02(15)
(15) “Fugitive emissions" means those emissions which could not reasonably pass through a stack, chimney, vent, or other functionally equivalent opening.
NR 405.02(16)
(16) “High terrain" means any area having an elevation 900 feet or more above the base of the stack of a source.
NR 405.02(17)
(17) “Indian governing body" means the governing body of any tribe, band, or group of Indians subject to the jurisdiction of the United States and recognized by the United States as possessing power of self-government.
NR 405.02(18)
(18) “Indian reservation" means any federally recognized reservation established by treaty, agreement, executive order, or act of congress.
NR 405.02(19)
(19) “Innovative control technology" means any system of air pollution control that has not been adequately demonstrated in practice, but would have a substantial likelihood of achieving greater continuous emissions reduction than any control system in current practice or of achieving at least comparable reductions at lower cost in terms of energy, economics, or nonair quality environmental impacts.
NR 405.02(20)
(20) “Low terrain" means any area other than high terrain.
NR 405.02(21)
(21) “Major modification" means any physical change in or change in the method of operation of a major stationary source that would result in a significant emissions increase of a regulated NSR air contaminant and a significant net emissions increase of that air contaminant from the major stationary source.
NR 405.02(21)(a)
(a) Any significant emissions increase from any emissions units or net emissions increase at a major stationary source that is significant for volatile organic compounds or nitrogen oxides shall be considered significant for ozone.
NR 405.02(21)(b)
(b) A physical change or change in the method of operation does not include any of the following:
NR 405.02(21)(b)2.
2. Use of an alternative fuel or raw material by reason of any order under sections 2 (a) and (b) of the Federal Energy Supply and Environmental Coordination Act of 1974 (
15 USC 791 to
798) or by reason of a natural gas curtailment plan pursuant to the Federal Power Act (
16 USC 791a to
828c).
NR 405.02(21)(b)4.
4. Use of an alternative fuel at a steam generating unit to the extent that the fuel is generated from municipal solid waste.
NR 405.02(21)(b)5.
5. Use of an alternative fuel or raw material by a stationary source when one of the following applies:
NR 405.02(21)(b)5.a.
a. The source was capable of accommodating the alternative fuel or raw material before January 6, 1975, unless the change would be prohibited under any federally enforceable permit condition which was established after January 6, 1975 pursuant to this chapter or
ch. NR 406 or
408 or under an operation permit issued pursuant to
ch. NR 407, or pursuant to a permit issued under
40 CFR Part 51 Appendix S,
40 CFR 52.21, or regulations approved pursuant to
40 CFR Part 51 subpart I.
NR 405.02(21)(b)6.
6. An increase in the hours of operation or in the production rate, unless the change would be prohibited under any federally enforceable permit condition which was established after January 6, 1975 pursuant to this chapter,
ch. NR 406, or
408 or under an operation permit issued pursuant to
ch. NR 407, or pursuant to a permit issued under
40 CFR Part 51 Appendix S,
40 CFR Part 52.21, or regulations approved pursuant to
40 CFR Part 51 subpart I.
NR 405.02(21)(b)8.
8. The installation, operation, cessation of operation or removal of a temporary clean coal technology demonstration project, provided that the project complies with both of the following:
NR 405.02(21)(b)8.b.
b. Other requirements necessary to attain and maintain the national ambient air quality standards during the project and after it is terminated.
NR 405.02(21)(b)9.
9. The installation or operation of a permanent clean coal technology demonstration project that constitutes repowering, provided that the project does not result in an increase in the potential to emit of any regulated air contaminant emitted by the unit. This exemption shall apply on a pollutant-by-pollutant basis.
NR 405.02(21)(b)10.
10. The reactivation of a very clean coal-fired electric utility steam generating unit.
NR 405.02(21)(c)
(c) This definition does not apply with respect to a particular regulated NSR air contaminant when the major stationary source is complying with the requirements under
s. NR 405.18 for a PAL for that air contaminant. Instead, the definition at
s. NR 405.18 (2) (e) shall apply.
NR 405.02(22)(a)1.
1. Any of the following stationary sources of air contaminants which emits, or has the potential to emit, 100 tons per year or more of any air contaminant subject to regulation under the Act: Fossil fuel fired steam electric plants of more than 250 million British thermal units per hour heat input, coal cleaning plants (with thermal dryers), kraft pulp mills, portland cement plants, primary zinc smelters, iron and steel mill plants, primary aluminum ore reduction plants, primary copper smelters, municipal incinerators capable of charging more than 250 tons of refuse per day, hydrofluoric, sulfuric, and nitric acid plants, petroleum refineries, lime plants, phosphate rock processing plants, coke oven batteries, sulfur recovery plants, carbon black plants (furnace process), primary lead smelters, fuel conversion plants, sintering plants, secondary metal production plants, chemical process plants (which does not include ethanol production facilities that produce ethanol by natural fermentation, as described by the 6-digit code of 312140 or 325193 in the North American Industry Classification System United States, 2007, incorporated by reference in
s. NR 484.05 (17)), fossil fuel boilers (or combinations thereof) totaling more than 250 million British thermal units per hour heat input, petroleum storage and transfer units with a total storage capacity exceeding 300,000 barrels, taconite ore processing plants, glass fiber processing plants, and charcoal production plants.
NR 405.02(22)(a)2.
2. Notwithstanding the stationary source size specified in
subd. 1., any stationary source which emits, or has the potential to emit, 250 tons per year or more of any air contaminant subject to regulation under the act.
NR 405.02(22)(a)3.
3. Any physical change that would occur at a stationary source not otherwise qualifying under this subsection as a major stationary source, if the change would constitute a major stationary source by itself.
NR 405.02(22)(b)
(b) A major source that is major for volatile organic compounds or nitrogen oxides shall be considered major for ozone.
NR 405.02(22)(d)
(d) Mobile source emissions indirectly caused by a source which attracts mobile source activity may not be considered in determining whether the source is a major stationary source for the purposes of this chapter.
NR 405.02(22m)(a)(a) “Minor source baseline date" means the earliest date after the trigger date on which the owner or operator of a major stationary source or a major modification subject to
40 CFR 52.21 or to regulations approved pursuant to
40 CFR 51.166 submits a complete application under the relevant regulations. The trigger date is:
NR 405.02(22m)(b)
(b) The minor source baseline date is established for each air contaminant for which increments or other equivalent measures have been established if:
NR 405.02(22m)(b)1.
1. The area in which the proposed source or modification would construct is designated as attainment or unclassifiable under section 107 (d) (1) (A) (ii) or (iii) of the Act (
42 USC 7407(d)(1) (A)(ii) or (iii)) for the air contaminant on the date of its complete application under
40 CFR 52.21 or under regulations approved pursuant to
40 CFR 51.166.
NR 405.02(22m)(b)2.
2. In the case of a major stationary source, the air contaminant would be emitted in significant amounts or, in the case of a major modification, there would be a significant net emissions increase of the air contaminant.
NR 405.02(23)
(23) “Necessary preconstruction approvals or permits" means those permits or approvals required under
chs. NR 400 to
499.
NR 405.02(24)(a)(a) “Net emissions increase" means, with respect to any regulated NSR air contaminant emitted by a major stationary source, the amount by which the difference between the sum of emission increases and the sum of emission decreases of the following exceeds zero:
NR 405.02(24)(a)1.
1. The increase in emissions from a particular physical change or change in the method of operation at a stationary source as calculated pursuant to the methods contained in
s. NR 405.025.
NR 405.02(24)(a)2.
2. Any other increases and decreases in actual emissions at the major stationary source that are contemporaneous with the particular change and are otherwise creditable. Baseline actual emissions for calculating increases and decreases under this subdivision shall be determined as provided in
sub. (2m), except that
sub. (2m) (a) 3. and
(b) 4. do not apply.
NR 405.02(24)(b)
(b) An increase or decrease in actual emissions is contemporaneous with the increase from the particular change only if it occurs between the following:
NR 405.02(24)(b)1.
1. The date 5 years before construction on the particular change commences.
NR 405.02(24)(c)
(c) An increase or decrease in actual emissions is creditable only if all of the following are satisfied:
