NR 264.21NR 264.21 Specialized definitions. The following definitions apply to the terms used in this subchapter: NR 264.21(1)(1) “Electronic crystals” means crystals or crystalline materials, such as crystals comprised of quartz, ceramic silicon, gallium arsenide, and indium arsenide, which, because of their unique structural and electrical properties, are used in electronic devices. NR 264.21(2)(2) “TTO” means the sum of the concentrations of each of the following toxic organic compounds which is found in the discharge at a concentration greater than 10 micrograms per liter: NR 264.21 HistoryHistory: Cr. Register, May, 1990, No. 413, eff. 6-1-90. NR 264.22NR 264.22 Effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available. Except as provided in 40 CFR 125.30 to 125.32, any existing point source subject to this subchapter shall achieve the following effluent limitations representing the degree of effluent reduction attainable by application of BPT: NR 264.22 Note(1) The arsenic limitation only applies to manufacturers of gallium or indium arsenide crystals.
NR 264.22 Note(2) Within the range of 6.0 to 9.0 at all times.
NR 264.22 HistoryHistory: Cr. Register, May, 1990, No. 413, eff. 6-1-90. NR 264.23NR 264.23 Effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable. Except as provided in 40 CFR 125.30 to 125.32, any existing point source subject to this subchapter shall achieve the following effluent limitations representing the degree of effluent reduction attainable by application of BAT: NR 264.23 Note(1) The arsenic limitation only applies to manufacturers of gallium or indium arsenide crystals.
NR 264.23 HistoryHistory: Cr. Register, May, 1990, No. 413, eff. 6-1-90. NR 264.24NR 264.24 New source performance standards. Any new source subject to this subchapter shall achieve the standards set forth in s. NR 264.23. NR 264.24 HistoryHistory: Cr. Register, May, 1990, No. 413, eff. 6-1-90. NR 264.25NR 264.25 Pretreatment standards for existing sources. Except as provided in ss. NR 211.13 and 211.14, any existing source subject to this subchapter which introduces pollutants into a POTW shall comply with ch. NR 211 and achieve the following PSES: NR 264.25 Note(1) The arsenic limitation only applies to manufacturers of gallium or indium arsenide crystals.
NR 264.25 HistoryHistory: Cr. Register, May, 1990, No. 413, eff. 6-1-90. NR 264.26NR 264.26 Pretreatment standards for new sources. Except as provided in s. NR 211.13, any new source subject to this subchapter which introduces pollutants into a POTW shall comply with ch. NR 211 and comply with the standards set forth in s. NR 264.25. NR 264.26 HistoryHistory: Cr. Register, May, 1990, No. 413, eff. 6-1-90. NR 264.27NR 264.27 Effluent limitations representing the degree of effluent reduction attainable by the application of the best conventional pollutant control technology. Except as provided in 40 CFR 125.30 to 125.32, any existing point source subject to this subchapter shall achieve the following effluent limitations representing the degree of effluent reduction attainable by application of BCT: NR 264.27 Note(1) Within the range of 6.0 to 9.0 at all times.
NR 264.27 HistoryHistory: Cr. Register, May, 1990, No. 413, eff. 6-1-90. NR 264.30NR 264.30 Applicability; description of the cathode ray tube subcategory. This subchapter applies to the discharge of pollutants to waters of the state and the introduction of pollutants into POTWs from the manufacture of cathode ray tubes. This subchapter does not apply to the manufacture of receiving or transmitting tubes. NR 264.30 HistoryHistory: Cr. Register, May, 1990, No. 413, eff. 6-1-90. NR 264.31NR 264.31 Specialized definitions. The following definitions apply to the terms used in this subchapter: NR 264.31(1)(1) “Cathode ray tube” means an electronic device in which electrons focus through a vacuum to generate a controlled image on a luminescent surface. NR 264.31(2)(2) “TTO” means the sum of the concentrations of each of the following toxic organic compounds which is found in the discharge at a concentration greater than 10 micrograms per liter. 1, 1, 1 chloroform
trichloroethane
methylene chloride
bis (2-ethylhexyl) phthalate
toluene
trichloroethylene
NR 264.31 HistoryHistory: Cr. Register, May, 1990, No. 413, eff. 6-1-90. NR 264.32NR 264.32 New source performance standards. Any new source subject to this subchapter shall achieve the following NSPS: NR 264.32 Note(1) Within the range of 6.0 to 9.0 at all times.
NR 264.32 HistoryHistory: Cr. Register, May, 1990, No. 413, eff. 6-1-90. NR 264.33NR 264.33 Pretreatment standards for existing sources. Except as provided in ss. NR 211.13 and 211.14, any existing source subject to this subchapter which introduces pollutants into a POTW shall comply with ch. NR 211 and achieve the following PSES: NR 264.33 HistoryHistory: Cr. Register, May, 1990, No. 413, eff. 6-1-90. NR 264.34NR 264.34 Pretreatment standards for new sources. Except as provided in s. NR 211.13, any new source subject to this subchapter which introduces pollutants into a POTW shall comply with ch. NR 211 and achieve the following PSNS: NR 264.34 HistoryHistory: Cr. Register, May, 1990, No. 413, eff. 6-1-90. NR 264.40NR 264.40 Applicability; description of the luminescent materials subcategory. This subchapter applies to the discharge of pollutants to waters of the state and the introduction of pollutants into POTWs resulting from the manufacture of materials, such as calcium halophosphate, yttrium oxide, zinc sulfide, and zinc-cadmium sulfide, which emit light upon excitation by energy sources such as photons, electrons, applied voltage, chemical reactions, or mechanical energy, and which are specifically used as coatings in fluorescent lamps and cathode ray tubes. NR 264.40 HistoryHistory: Cr. Register, May, 1990, No. 413, eff. 6-1-90. NR 264.41NR 264.41 New source performance standards. Any new source subject to this subchapter shall achieve the following NSPS: NR 264.41 Note(1) Within the range of 6.0 to 9.0 at all times.
NR 264.41 HistoryHistory: Cr. Register, May, 1990, No. 413, eff. 6-1-90. NR 264.42NR 264.42 Pretreatment standards for new sources. Except as provided in s. NR 211.13, any new source subject to this subchapter which introduces pollutants into a POTW shall comply with ch. NR 211 and achieve the following PSNS: NR 264.42 HistoryHistory: Cr. Register, May, 1990, No. 413, eff. 6-1-90. NR 264.42 NoteNote: The Wisconsin administrative code corresponds to the code of federal regulations as cross referenced in the following table:
