This is the preview version of the Wisconsin State Legislature site.
Please see http://docs.legis.wisconsin.gov for the production version.
NR 264.05(2)(2)The following compliance dates apply to sources subject to this chapter which introduce process wastewater pollutants into a POTW:
NR 264.05(2)(a)(a) Any existing source subject to the semiconductor subcategory shall achieve PSES by July 1, 1984.
NR 264.05(2)(b)(b) Any existing source subject to the electronic crystals subcategory shall achieve the PSES for TTO by July 1, 1984 and for arsenic by November 8, 1985.
NR 264.05(2)(c)(c) Any existing source subject to the cathode ray tube subcategory shall achieve the PSES by July 14, 1986.
NR 264.05(2)(d)(d) Any new source shall achieve PSNS at the commencement of discharge.
NR 264.05 HistoryHistory: Cr. Register, May, 1990, No. 413, eff. 6-1-90.
subch. I of ch. NR 264Subchapter I — Semiconductor Subcategory
NR 264.10NR 264.10Applicability; description of the semiconductor subcategory. This subchapter applies to the discharge of pollutants to waters of the state and the introduction of pollutants into POTWs from all process operations, beginning with the use of crystal wafers, which lead to or are associated with the manufacture of semiconductors, except sputtering, vapor deposition, and electroplating.
NR 264.10 HistoryHistory: Cr. Register, May, 1990, No. 413, eff. 6-1-90.
NR 264.11NR 264.11Specialized definitions. The following definitions apply to the terms used in this subchapter:
NR 264.11(1)(1)“Semiconductor” means a solid state electrical device which performs functions such as information processing and display, power handling, and interconversion between light energy and electrical energy.
NR 264.11(2)(2)“TTO” means the sum of the concentrations of each of the following toxic organic compounds which is found in the discharge at a concentration greater than 10 micrograms per liter:
NR 264.11 HistoryHistory: Cr. Register, May, 1990, No. 413, eff. 6-1-90.
NR 264.12NR 264.12Effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available. Except as provided in 40 CFR 125.30 to 125.32, any existing point source subject to this subchapter shall achieve the following effluent limitations representing the degree of effluent reduction attainable by application of BPT:
NR 264.12 HistoryHistory: Cr. Register, May, 1990, No. 413, eff. 6-1-90.
NR 264.13NR 264.13Effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable. Except as provided in 40 CFR 125.30 to 125.32, any existing point source subject to this subchapter shall achieve the following effluent limitations representing the degree of effluent reduction attainable by application of BAT:
NR 264.13 HistoryHistory: Cr. Register, May, 1990, No. 413, eff. 6-1-90.
NR 264.14NR 264.14New source performance standards. Any new source subject to this subchapter shall achieve the following NSPS:
NR 264.14 HistoryHistory: Cr. Register, May, 1990, No. 413, eff. 6-1-90.
NR 264.15NR 264.15Pretreatment standards for existing sources. Except as provided in ss. NR 211.13 and 211.14, any existing source subject to this subchapter which introduces pollutants into a POTW shall comply with ch. NR 211 and the TTO concentration in the discharge may not exceed 1.37 milligrams per liter for any one day.
NR 264.15 HistoryHistory: Cr. Register, May, 1990, No. 413, eff. 6-1-90.
NR 264.17NR 264.17Effluent limitations representing the degree of effluent reduction attainable by the application of the best conventional pollutant control technology. Except as provided in 40 CFR 125.30 to 125.32, any existing point source subject to this subchapter shall achieve a pH within the range of 6.0 to 9.0 at all times.
NR 264.17 HistoryHistory: Cr. Register, May, 1990, No. 413, eff. 6-1-90.
subch. II of ch. NR 264Subchapter II — Electronic Crystals Subcategory
NR 264.20NR 264.20Applicability; description of the electronic crystals subcategory. This subchapter applies to the discharge of pollutants to waters of the state and the introduction of pollutants into POTWs resulting from the growing of crystals or the production of crystal wafers for use in the manufacture of electronic devices.
NR 264.20 HistoryHistory: Cr. Register, May, 1990, No. 413, eff. 6-1-90.
NR 264.21NR 264.21Specialized definitions. The following definitions apply to the terms used in this subchapter:
NR 264.21(1)(1)“Electronic crystals” means crystals or crystalline materials, such as crystals comprised of quartz, ceramic silicon, gallium arsenide, and indium arsenide, which, because of their unique structural and electrical properties, are used in electronic devices.
NR 264.21(2)(2)“TTO” means the sum of the concentrations of each of the following toxic organic compounds which is found in the discharge at a concentration greater than 10 micrograms per liter:
NR 264.21 HistoryHistory: Cr. Register, May, 1990, No. 413, eff. 6-1-90.
NR 264.22NR 264.22Effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available. Except as provided in 40 CFR 125.30 to 125.32, any existing point source subject to this subchapter shall achieve the following effluent limitations representing the degree of effluent reduction attainable by application of BPT:
NR 264.22 Note(1) The arsenic limitation only applies to manufacturers of gallium or indium arsenide crystals.
NR 264.22 Note(2) Within the range of 6.0 to 9.0 at all times.
NR 264.22 HistoryHistory: Cr. Register, May, 1990, No. 413, eff. 6-1-90.
NR 264.23NR 264.23Effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable. Except as provided in 40 CFR 125.30 to 125.32, any existing point source subject to this subchapter shall achieve the following effluent limitations representing the degree of effluent reduction attainable by application of BAT:
NR 264.23 Note(1) The arsenic limitation only applies to manufacturers of gallium or indium arsenide crystals.
NR 264.23 HistoryHistory: Cr. Register, May, 1990, No. 413, eff. 6-1-90.
NR 264.24NR 264.24New source performance standards. Any new source subject to this subchapter shall achieve the standards set forth in s. NR 264.23.
NR 264.24 HistoryHistory: Cr. Register, May, 1990, No. 413, eff. 6-1-90.
NR 264.25NR 264.25Pretreatment standards for existing sources. Except as provided in ss. NR 211.13 and 211.14, any existing source subject to this subchapter which introduces pollutants into a POTW shall comply with ch. NR 211 and achieve the following PSES:
NR 264.25 Note(1) The arsenic limitation only applies to manufacturers of gallium or indium arsenide crystals.
NR 264.25 HistoryHistory: Cr. Register, May, 1990, No. 413, eff. 6-1-90.
NR 264.26NR 264.26Pretreatment standards for new sources. Except as provided in s. NR 211.13, any new source subject to this subchapter which introduces pollutants into a POTW shall comply with ch. NR 211 and comply with the standards set forth in s. NR 264.25.
NR 264.26 HistoryHistory: Cr. Register, May, 1990, No. 413, eff. 6-1-90.
NR 264.27NR 264.27Effluent limitations representing the degree of effluent reduction attainable by the application of the best conventional pollutant control technology. Except as provided in 40 CFR 125.30 to 125.32, any existing point source subject to this subchapter shall achieve the following effluent limitations representing the degree of effluent reduction attainable by application of BCT:
NR 264.27 Note(1) Within the range of 6.0 to 9.0 at all times.
NR 264.27 HistoryHistory: Cr. Register, May, 1990, No. 413, eff. 6-1-90.
subch. III of ch. NR 264Subchapter III — Cathode Ray Tube Subcategory
NR 264.30NR 264.30Applicability; description of the cathode ray tube subcategory. This subchapter applies to the discharge of pollutants to waters of the state and the introduction of pollutants into POTWs from the manufacture of cathode ray tubes. This subchapter does not apply to the manufacture of receiving or transmitting tubes.
NR 264.30 HistoryHistory: Cr. Register, May, 1990, No. 413, eff. 6-1-90.
NR 264.31NR 264.31Specialized definitions. The following definitions apply to the terms used in this subchapter:
NR 264.31(1)(1)“Cathode ray tube” means an electronic device in which electrons focus through a vacuum to generate a controlled image on a luminescent surface.
NR 264.31(2)(2)“TTO” means the sum of the concentrations of each of the following toxic organic compounds which is found in the discharge at a concentration greater than 10 micrograms per liter.
1, 1, 1 chloroform
trichloroethane
methylene chloride
bis (2-ethylhexyl) phthalate
toluene
trichloroethylene
NR 264.31 HistoryHistory: Cr. Register, May, 1990, No. 413, eff. 6-1-90.
NR 264.32NR 264.32New source performance standards. Any new source subject to this subchapter shall achieve the following NSPS:
NR 264.32 Note(1) Within the range of 6.0 to 9.0 at all times.
NR 264.32 HistoryHistory: Cr. Register, May, 1990, No. 413, eff. 6-1-90.
NR 264.33NR 264.33Pretreatment standards for existing sources. Except as provided in ss. NR 211.13 and 211.14, any existing source subject to this subchapter which introduces pollutants into a POTW shall comply with ch. NR 211 and achieve the following PSES:
NR 264.33 HistoryHistory: Cr. Register, May, 1990, No. 413, eff. 6-1-90.
NR 264.34NR 264.34Pretreatment standards for new sources. Except as provided in s. NR 211.13, any new source subject to this subchapter which introduces pollutants into a POTW shall comply with ch. NR 211 and achieve the following PSNS:
NR 264.34 HistoryHistory: Cr. Register, May, 1990, No. 413, eff. 6-1-90.
subch. IV of ch. NR 264Subchapter IV — Luminescent Materials Subcategory
NR 264.40NR 264.40Applicability; description of the luminescent materials subcategory. This subchapter applies to the discharge of pollutants to waters of the state and the introduction of pollutants into POTWs resulting from the manufacture of materials, such as calcium halophosphate, yttrium oxide, zinc sulfide, and zinc-cadmium sulfide, which emit light upon excitation by energy sources such as photons, electrons, applied voltage, chemical reactions, or mechanical energy, and which are specifically used as coatings in fluorescent lamps and cathode ray tubes.
NR 264.40 HistoryHistory: Cr. Register, May, 1990, No. 413, eff. 6-1-90.
NR 264.41NR 264.41New source performance standards. Any new source subject to this subchapter shall achieve the following NSPS:
NR 264.41 Note(1) Within the range of 6.0 to 9.0 at all times.
NR 264.41 HistoryHistory: Cr. Register, May, 1990, No. 413, eff. 6-1-90.
NR 264.42NR 264.42Pretreatment standards for new sources. Except as provided in s. NR 211.13, any new source subject to this subchapter which introduces pollutants into a POTW shall comply with ch. NR 211 and achieve the following PSNS:
NR 264.42 HistoryHistory: Cr. Register, May, 1990, No. 413, eff. 6-1-90.
Loading...
Loading...
Published under s. 35.93, Stats. Updated on the first day of each month. Entire code is always current. The Register date on each page is the date the chapter was last published.