Wisconsin Legislature: NR 255.14(1)

- See PDF for table

NR 255.12(2)(2) There may be no discharge allowance for process wastewater pollutants from any battery manufacturing operation other than those battery manufacturing operations listed in tables 11 to 18.

NR 255.12 HistoryHistory: Cr. Register, November, 1987, No. 383, eff. 12-1-87; correction in (1) made under s. 13.92 (4) (b) 7., Stats., Register April 2013 No. 688.

NR 255.13NR 255.13 New source performance standards.

NR 255.13(1)(1) The discharge of wastewater pollutants from any new source subject to this subchapter may not exceed the following standards:

- See PDF for table

1 Within the range of 7.5 to 10.0 at all times.

- See PDF for table

- See PDF for table

1 Within the range of 7.5 to 10.0 at all times.

- See PDF for table

1 Within the range of 7.5 to 10.0 at all times.

- See PDF for table

1 Within the range of 7.5 to 10.0 at all times.

- See PDF for table

1 Within the range of 7.5 to 10.0 at all times.

- See PDF for table

1 Within the range of 7.5 to 10.0 at all times.

- See PDF for table

1 Within the range of 7.5 to 10.0 at all times.

NR 255.13(2)(2) There may be no discharge allowance for process wastewater pollutants from any battery manufacturing operation other than those battery manufacturing operations listed in tables 19 to 26.

NR 255.13 HistoryHistory: Cr. Register, November, 1987, No. 383, eff. 12-1-87.

NR 255.14NR 255.14 Pretreatment standards for existing sources.

NR 255.14(1)(1) Except as provided in 40 CFR 403.7 and 403.13, any existing source subject to this subchapter that introduces pollutants into a POTW shall comply with 40 CFR Part 403 and achieve the following pretreatment standards for existing sources:

NR 255.14(2)(2) There may be no discharge allowance for process wastewater pollutants from any battery manufacturing operation other than those battery manufacturing operations listed in tables 27 to 34.

NR 255.14 HistoryHistory: Cr. Register, November, 1987, No. 383, eff. 12-1-87; correction in (1) made under s. 13.92 (4) (b) 7., Stats., Register April 2013 No. 688.

NR 255.15NR 255.15 Pretreatment standards for new sources.

NR 255.15(1)(1) Except as provided in 40 CFR 403.7, any new source subject to this subchapter that introduces pollutants into a POTW shall comply with 40 CFR Part 403 and achieve the following pretreatment standards for new sources:

NR 255.15(2)(2) There may be no discharge allowance for process waste-water pollutants from any battery manufacturing operation other than those battery manufacturing operations listed in tables 35 to 42.

NR 255.15 HistoryHistory: Cr. Register, November, 1987, No. 383, eff. 12-1-87.

subch. III of ch. NR 255Subchapter III — Calcium Subcategory

NR 255.20NR 255.20 Applicability; description of the calcium subcategory. This subchapter applies to the discharge of pollutants to waters of the state and the introduction of pollutants into POTWs from manufacturing calcium anode batteries.

NR 255.20 HistoryHistory: Cr. Register, November, 1987, No. 383, eff. 12-1-87.

NR 255.23NR 255.23 New source performance standards. There may be no discharge allowance for process wastewater pollutants from any battery manufacturing new source subject to this subchapter.

NR 255.23 HistoryHistory: Cr. Register, November, 1987, No. 383, eff. 12-1-87.

NR 255.25NR 255.25 Pretreatment standards for new sources. There may be no discharge allowance for process wastewater pollutants into a POTW from any battery manufacturing new source subject to this subchapter.

NR 255.25 HistoryHistory: Cr. Register, November, 1987, No. 383, eff. 12-1-87.

subch. IV of ch. NR 255Subchapter IV — Lead Subcategory

NR 255.30NR 255.30 Applicability; description of the lead subcategory. This subchapter applies to the discharge of pollutants to waters of the state and the introduction of pollutants into POTWs from manufacturing lead anode batteries.

NR 255.30 HistoryHistory: Cr. Register, November, 1987, No. 383, eff. 12-1-87.

NR 255.31NR 255.31 Effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available.

NR 255.31(1)(1) Except as provided in 40 CFR 125.30 to 125.32, any existing source subject to this subchapter shall achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of BPT:

- See PDF for table

1 Within the range of 7.5 to 10.0 at all times.

- See PDF for table

1 Within the range of 7.5 to 10.0 at all times.

- See PDF for table

1 Within the range of 7.5 to 10.0 at all times.

- See PDF for table

1 Within the range of 7.5 to 10.0 at all times.

- See PDF for table

1 Within the range of 7.5 to 10.0 at all times.

- See PDF for table

1 Within the range of 7.5 to 10.0 at all times.

- See PDF for table

1 Within the range of 7.5 to 10.0 at all times.

- See PDF for table

1 Within the range of 7.5 to 10.0 at all times.

- See PDF for table

1 Within the range of 7.5 to 10.0 at all times.

- See PDF for table

1Within the range of 7.5 to 10.0 at all times.

- See PDF for table

1 Within the range of 7.5 to 10.0 at all times.

NR 255.31(2)(2) There may be no discharge allowance for process wastewater pollutants from any battery manufacturing operation other than those battery manufacturing operations listed in tables 43 to 53.

NR 255.31 HistoryHistory: Cr. Register, November, 1987, No. 383, eff. 12-1-87; correction in (1) made under s. 13.92 (4) (b) 7., Stats., Register April 2013 No. 688.

NR 255.32NR 255.32 Effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable.

NR 255.32(1)(1) Except as provided in 40 CFR 125.30 to 125.32, any existing source subject to this subchapter shall achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of BAT: