NR 253.11 Note
(1) These effluent limitations are applicable only to those plants which actually discharge the drawing spent lubricant wastestream at the copper forming site. If these wastewaters are hauled off-site for disposal or are otherwise not discharged at the copper forming site, these limitations are neither applicable nor allowable.
NR 253.11 Note
(1) Within the range of 7.5 to 10.0 at all times
NR 253.11 History
History: Cr.
Register, May, 1989, No. 401, eff. 6-1-89.
NR 253.12 History
History: Cr.
Register, May, 1989, No. 401, eff. 6-1-89.
NR 253.13
NR 253.13
New source performance standards. The discharge of process wastewater pollutants from any new source subject to this subchapter may not exceed the following NSPS:
-
See PDF for table 
NR 253.13 History
History: Cr.
Register, May, 1989, No. 401, eff. 6-1-89.
NR 253.14
NR 253.14
Pretreatment standards for existing sources. Except as provided in ss. NR 211.13 and 211.14, any existing source subject to this subchapter which introduces pollutants into a POTW shall comply with ch. NR 211 and achieve the following PSES:
-
See PDF for table NR 253.14 Note
(1) For alternate monitoring
NR 253.14 History
History: Cr.
Register, May, 1989, No. 401, eff. 6-1-89.
NR 253.15
NR 253.15
Pretreatment standards for new sources. Except as provided in
s. NR 211.13, any existing [new] source subject to this subchapter which introduces pollutants into a POTW shall comply with
ch. NR 211 and achieve the following PSNS:
-
See PDF for table NR 253.15 Note
(1) For alternate monitoring
NR 253.15 History
History: Cr.
Register, May, 1989, No. 401, eff. 6-1-89.
NR 253.15 Note
Note:
The Wisconsin administrative code corresponds to the code of federal regulations as cross referenced in the following table:
-
See PDF for table
