Skip navigation Wisconsin State Legislature
This is the preview version of the Wisconsin State Legislature site.
Please see http://docs.legis.wisconsin.gov for the production version.
Up
NR 253.05(1)(b)(b) The effluent limitations representing BAT by July 1, 1984.
NR 253.05(2)(2) Any new source subject to this chapter which discharges to waters of the state shall achieve NSPS at the commencement of discharge.
NR 253.05(3)(3) Any existing source subject to this chapter which introduces process wastewater pollutants into a POTW shall achieve PSES by August 15, 1986.
NR 253.05(4)(4) Any new source subject to this chapter which introduces process wastewater pollutants into a POTW shall achieve PSNS at the commencement of discharge.
NR 253.05 HistoryHistory: Cr. Register, May, 1989, No. 401, eff. 6-1-89.
subch. I of ch. NR 253Subchapter I — The Copper Forming Subcategory
NR 253.10NR 253.10 Applicability; description of the copper forming subcategory. This subchapter applies to the discharge of pollutants to waters of the state and the introduction of pollutants into POTWs from the forming of copper and copper alloys except beryllium copper alloys.
NR 253.10 HistoryHistory: Cr. Register, May, 1989, No. 401, eff. 6-1-89.
NR 253.11NR 253.11 Effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available. Except as provided in 40 CFR 125.30 to 125.32, any existing source subject to this subchapter shall achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of BPT:
- See PDF for table PDF
NR 253.11 Note(1) Within the range of 7.5 to 10.0 at all times
- See PDF for table PDF
NR 253.11 Note(1) Within the range of 7.5 to 10.0 at all times
- See PDF for table PDF
NR 253.11 Note(1) These effluent limitations are applicable only to those plants which actually discharge the drawing spent lubricant wastestream at the copper forming site. If these wastewaters are hauled off-site for disposal or are otherwise not discharged at the copper forming site, these limitations are neither applicable nor allowable.
NR 253.11 Note(2) Within the range of 7.5 to 10.0 at all times
- See PDF for table PDF
NR 253.11 Note(1) Within the range of 7.5 to 10.0 at all times
- See PDF for table PDF
NR 253.11 Note(1) Within the range of 7.5 to 10.0 at all times
- See PDF for table PDF
NR 253.11 Note(1) Within the range of 7.5 to 10.0 at all times
- See PDF for table PDF
NR 253.11 Note(1) Within the range of 7.5 to 10.0 at all times
- See PDF for table PDF
NR 253.11 Note(1) Within the range of 7.5 to 10.0 at all times
- See PDF for table PDF
NR 253.11 Note(1) Within the range of 7.5 to 10.0 at all times
- See PDF for table PDF
NR 253.11 Note(1) Within the range of 7.5 to 10.0 at all times
- See PDF for table PDF
NR 253.11 Note(1) Within the range of 7.5 to 10.0 at all times
- See PDF for table PDF
NR 253.11 Note(1) Within the range of 7.5 to 10.0 at all times
- See PDF for table PDF
NR 253.11 Note(1) Within the range of 7.5 to 10.0 at all times
- See PDF for table PDF
NR 253.11 Note(1) Within the range of 7.5 to 10.0 at all times
- See PDF for table PDF
NR 253.11 Note(1) Within the range of 7.5 to 10.0 at all times
- See PDF for table PDF
NR 253.11 Note(1) Within the range of 7.5 to 10.0 at all times
- See PDF for table PDF
NR 253.11 Note(1) Within the range of 7.5 to 10.0 at all times
NR 253.11 HistoryHistory: Cr. Register, May, 1989, No. 401, eff. 6-1-89.
NR 253.12NR 253.12 Effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable. Except as provided in 40 CFR 125.30 to 125.32, any existing source subject to this subchapter shall achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of BAT:
- See PDF for table PDF
- See PDF for table PDF
- See PDF for table PDF
- See PDF for table PDF
- See PDF for table PDF
- See PDF for table PDF
- See PDF for table PDF
- See PDF for table PDF
- See PDF for table PDF
- See PDF for table PDF
- See PDF for table PDF
- See PDF for table PDF
- See PDF for table PDF
- See PDF for table PDF
- See PDF for table PDF
- See PDF for table PDF
- See PDF for table PDF
NR 253.12 HistoryHistory: Cr. Register, May, 1989, No. 401, eff. 6-1-89.
NR 253.13NR 253.13 New source performance standards. The discharge of process wastewater pollutants from any new source subject to this subchapter may not exceed the following NSPS:
- See PDF for table PDF
NR 253.13 Note(1) Within the range of 7.5 to 10.0 at all times
- See PDF for table PDF
NR 253.13 Note(1) Within the range of 7.5 to 10.0 at all times
- See PDF for table PDF
NR 253.13 Note(1) Within the range of 7.5 to 10.0 at all times
- See PDF for table PDF
NR 253.13 Note(1) Within the range of 7.5 to 10.0 at all times
- See PDF for table PDF
NR 253.13 Note(1) Within the range of 7.5 to 10.0 at all times
- See PDF for table PDF
NR 253.13 Note(1) Within the range of 7.5 to 10.0 at all times
- See PDF for table PDF
NR 253.13 Note(1) Within the range of 7.5 to 10.0 at all times
- See PDF for table PDF
NR 253.13 Note(1) Within the range of 7.5 to 10.0 at all times
- See PDF for table PDF
NR 253.13 Note(1) Within the range of 7.5 to 10.0 at all times
- See PDF for table PDF
NR 253.13 Note(1) Within the range of 7.5 to 10.0 at all times
- See PDF for table PDF
NR 253.13 Note(1) Within the range of 7.5 to 10.0 at all times
- See PDF for table PDF
NR 253.13 Note(1) Within the range of 7.5 to 10.0 at all times
Down
Loading...
Loading...
Published under s. 35.93, Stats. Updated on the first day of each month. Entire code is always current. The Register date on each page is the date the chapter was last published.