Chapter NR 239
CARBON BLACK MANUFACTURING
NR 239.04 Compliance with effluent limitations and standards.
NR 239.06 Application of effluent limitations and standards.
NR 239.10 Effluent limitations, best practicable treatment.
NR 239.13 Pretreatment standards.
NR 239.01
NR 239.01
Purpose. The purpose of this chapter is to establish effluent limitations, standards of performance, and pretreatment standards for discharges of process wastes from the carbon black manufacturing category of point sources and subcategories thereof.
NR 239.01 Note
Note: The authority for promulgation of this chapter is set forth in ch.
NR 205.
NR 239.01 History
History: Cr.
Register, June, 1977, No. 258, eff. 7-1-77.
NR 239.02
NR 239.02
Applicability. The effluent limitations, standards of performance, pretreatment standards, and other provisions in this chapter are applicable to pollutants or pollutant properties in discharges of process waste resulting from manufacture in any of the following process subcategories:
NR 239.02 History
History: Cr.
Register, June, 1977, No. 258, eff. 7-1-77.
NR 239.03
NR 239.03
Definitions. Definitions of terms and meanings of abbreviations used in this chapter are set forth in
ch. NR 205.
NR 239.03 History
History: Cr.
Register, June, 1977, No. 258, eff. 7-1-77.
NR 239.04
NR 239.04
Compliance with effluent limitations and standards. Discharge of pollutants from facilities subject to the provisions of this chapter may not exceed, as appropriate:
NR 239.04(1)
(1) By July 1, 1977 effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available;
NR 239.04(2)
(2) By July 1, 1983 effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable;
NR 239.04(3)
(3) Pretreatment standards for discharges to publicly owned treatment works;
NR 239.04 History
History: Cr.
Register, June, 1977, No. 258, eff. 7-1-77; r. and recr.
Register, August, 1983, No. 332, eff. 9-1-83.
NR 239.06
NR 239.06
Application of effluent limitations and standards. NR 239.06(1)(1) The effluent limitations and standards set forth in this chapter shall be used in accordance with this section to establish the quantity or quality of pollutants or pollutant properties which may be discharged by a point source subject to the provisions of this chapter, except as:
NR 239.06(1)(b)
(b) They may be superseded by more stringent limitations and standards necessary to achieve water quality standards or meet other legal requirements, or
NR 239.06(1)(c)
(c) They may be supplemented or superseded by standards or prohibitions for toxic pollutants or by additional limitations for other pollutants required to achieve water quality.
NR 239.06 History
History: Cr.
Register, June, 1977, No. 258, eff. 7-1-77;
correction in (1) (a) made under s. 13.92 (4) (b) 7, Stats., Register April 2018 No. 748. NR 239.10
NR 239.10
Effluent limitations, best practicable treatment. Except as provided in subch.
IV of ch. NR 220, there shall be no discharge of process wastewater pollutants from a facility subject to the provisions of this chapter after application to process wastes of the best practicable control technology currently available.
NR 239.10 History
History: Cr.
Register, June, 1977, No. 258, eff. 7-1-77;
correction made under s. 13.92 (4) (b) 7, Stats., Register April 2018 No. 748.
NR 239.13
NR 239.13
Pretreatment standards. The pretreatment standards for discharges to publicly owned treatment works from sources subject to the provisions of this chapter shall be as set forth in
ch. NR 211.
NR 239.13 History
History: Cr.
Register, August, 1983, No. 332, eff. 9-1-83.
