NR 214.18(4)(a)
(a) The discharge to a sludge spreading site may not exceed the hydraulic, organic, nitrogen, chloride or other limitations specified in a WPDES permit or plans developed pursuant to a permit requirement. In determining discharge limitations, the department shall consider past operating performance, the ability of the soils to treat the pollutants in the discharge, nutrient uptake of the cover crops, hydrogeologic characteristics of the site such as permeability and infiltration rates, and other relevant information.
NR 214.18(4)(b)
(b) The sludge application rate shall be limited so that any parameter that may impact groundwater quality is restricted to minimize the concentration of the substance in the groundwater to the extent technically and economically feasible and to prevent exceedence of the preventive action limit in the groundwater.
NR 214.18(4)(c)
(c) In order to prevent surface runoff and leaching and to control objectionable odors, the department may require liquid sludge to be incorporated into the soil surface within a time period specified in the WPDES permit. Cake sludge shall be incorporated in the soil in accordance with the time period specified in the sludge spreading management plan.
NR 214.18(4)(d)
(d) The total amount of any nutrient applied per year may not exceed the nutrient needs of the crop to be grown minus available nutrients in the soil or applied as fertilizer.
NR 214.18(4)(e)
(e) The pH of the sludge and soil mixture shall be 6.5 or higher at the time that the sludge is spread. If the concentration of cadmium in the sludge is 2 mg/kg (dry weight) or less, the soil pH may be less than 6.5.
NR 214.18(4)(f)
(f) No more than 0.45 pounds per acre of cadmium may be spread annually on land used for production of food chain crops.
NR 214.18(4)(g)
(g) The cumulative amount of cadmium, copper, lead, nickel and zinc spread on any site may not exceed the levels listed in Table 4.
-
See PDF for table ![PDF](https://docs-preview.legis.wisconsin.gov/assets/image/file_acrobat.gif)
NR 214.18(4)(h)
(h) Sludge containing concentrations of PCBs equal to or greater than 10 mg/kg (dry weight) shall be incorporated into the soil when applied to land used for producing animal feed, including pasture crops for animals raised for the purpose of producing milk. The department may allow surface application of the sludge if it is assured that the PCB content is less than 0.2 mg/kg (actual weight) in animal feed or less than 1.5 mg/kg (fat basis) in milk from animals consuming the feed.
NR 214.18(4)(i)
(i) The department may limit or prohibit the land application of sludges containing additional pollutants such as, but not limited to phenolics, pesticides and bioaccumulative organics. Any such limit or prohibition shall be based on waste characteristics, soil cation exchange capacity, type of crop grown and other relevant factors.
NR 214.18(5)(a)(a) The discharge shall be monitored for total daily discharge volume.
NR 214.18(5)(b)
(b) The department may require in a WPDES permit that the sludge spreading discharge be monitored for total suspended solids, forms of nitrogen, chloride, metals or any other pollutant that may be present. The department shall select the pollutants to be monitored and the required frequency of monitoring on a case-by-case basis by considering the potential public health impacts, probable environmental impact, soil and geologic conditions, past operating performance, concentrations and characteristics of pollutants in the discharge and other relevant information.
NR 214.18(5)(c)
(c) The department may require the submittal of monitoring reports to include the following information for each site utilized during the reporting period:
NR 214.18(5)(c)1.
1. The amount of sludge applied in tons per acre on a dry weight basis.
NR 214.18(5)(c)2.
2. The amount of nitrogen applied in pounds per acre on a dry weight basis.
NR 214.18(5)(c)3.
3. The amount of each metal applied in pounds per acre on a dry weight basis.
NR 214.18(5)(c)4.
4. Other site monitoring information as specified in the sludge management plan or WPDES permit.
NR 214.18(5)(c)5.
5. A description of any adverse environmental, health or social effects that occurred due to sludge application during the preceding reporting period.
NR 214.18(5)(d)
(d) The department may require electronic or paper submittal of discharge monitoring reports and land application forms.
NR 214.18(6)(a)
(a) Spillage or leakage from vehicles used for transporting or spreading sludge shall be prevented.
NR 214.18(6)(b)
(b) The vehicle shall be moving forward at all times of application unless it is equipped with a high pressure spray nozzle which evenly distributes the sludge over the land.
NR 214.18(6)(c)
(c) Management plan. The department shall require each sludge spreading system owner or operator to submit a management plan for optimizing system performance and demonstrating compliance with the requirements of this chapter. Following approval by the department, the system shall be operated in conformance with the management plan. If the facility wishes to operate differently than specified in the approved plan, a written request shall be submitted to the department for approval to amend the management plan. The plan shall specify information on: sludge volumes and characteristics, beneficial or nondetrimental fertilizer or soil conditioner properties, production and pretreatment processes, description of all site limitations, vegetative cover control and removal, availability of storage, type of transportation and spreading vehicle, sludge application rates, load and rest schedules, contingency plans for periods of adverse weather, odor and nuisance abatement or any other pertinent information.
NR 214.18(7)
(7) Soil investigation and groundwater monitoring requirements. Soil investigation and groundwater monitoring requirements are specified in ss.
NR 214.20 and
214.21.
NR 214.18 History
History: Cr.
Register, June, 1990, No. 414, eff. 7-1-90;
CR 09-123: cr. (5) (d)
Register July 2010 No. 655, eff. 8-1-10.
NR 214.20
NR 214.20
Soil investigation requirements. NR 214.20(1)(1)
Applicability. This section is applicable to all new, expanded or modified land treatment systems receiving liquid wastes, by-product solids and sludges from industrial facilities for which a plan approval under s.
281.41, Stats., and ch.
NR 108 or a WPDES discharge permit under ch.
283, Stats., is required. It is also applicable to those existing dischargers which need to demonstrate according to s.
NR 214.06 (1) that their land treatment system complies with groundwater protection requirements although the system does not meet each specific design standard.
NR 214.20(2)
(2) Professional qualifications. The department shall accept soil test pit evaluations, soil classifications and soil boring logs performed by a qualified soil scientist, engineer or other qualified individual. Qualifications shall include a degree from an accredited institution of higher education or field experience in soil investigation, interpretation and classification.
NR 214.20(3)
(3) Technical procedures. All technical procedures used to investigate a wastewater disposal facility shall be the current standard procedures as specified by the American society for testing and materials, United States geologic survey, standard methods for the examination of water and wastewater, or other equivalent or appropriate methods approved by the department. Test procedures used shall be specified. Any deviation from a standard method shall be explained in detail with reasons provided.
NR 214.20(4)
(4) Soil evaluations for landspreading and sludge spreading systems. The following soil related information shall be submitted for sludge spreading systems or landspreading systems for liquid waste or organic by-product solids:
NR 214.20(4)(a)
(a) Individual treatment site locations identified on topographic maps, plat maps or aerial photographs,
NR 214.20(4)(b)
(b) Relevant, existing soil survey information such as that assembled by the U.S. department of agriculture, soil conservation service including the soil names, percent slope, relative permeability, available water capacity, organic matter content and current land use,
NR 214.20(4)(c)
(c) A detailed soils map displaying the location of the various soils on the site at a scale of not more than 2,000 feet to the inch,
NR 214.20(4)(d)
(d) Laboratory determined or estimated soil cation exchange capacity,
NR 214.20(4)(e)
(e) Agronomic soil nutrient testing results for making fertilizer and liming recommendations for cover crop growth using procedures such as those employed by the university of Wisconsin - cooperative extension program,
NR 214.20(4)(f)
(f) Additional soil related information that may be required by the department on a case-by-case basis.
NR 214.20(5)
(5) Treatment systems where groundwater monitoring wells are not required. For absorption pond, ridge and furrow, spray irrigation, overland flow and subsurface absorption systems where groundwater monitoring wells are not required, or for those sites which are being investigated for potential future use as such systems, the soils evaluation shall contain the following information and investigation, at a minimum:
NR 214.20(5)(a)
(a) The location, soil survey, soil cation exchange capacity and soil nutrient content information as specified for landspreading systems in sub.
(4).
NR 214.20(5)(b)
(b) A sufficient number of soil test pits shall be excavated to adequately define the soil conditions found on the site.
NR 214.20(5)(b)1.
1. Prior to soil test pit construction, the treatment site owner or operator and the department shall agree on the number and location of test pits to be excavated dependent upon the size of the land treatment site and uniformity of soils and geology.
NR 214.20(5)(b)2.
2. The soil test pits shall be large enough to allow visual inspection and documentation of soil layers and shall be excavated to a depth of 5 feet below the final base grade of the system. The U.S. occupational health and safety administration requires that test pits with more than 5 feet of standing wall shall not be entered unless provision is made to prevent caving of the walls.
NR 214.20(5)(b)3.
3. The department shall be notified at least 24 hours prior to excavation of the soil test pits to allow inspection by department personnel.
NR 214.20(5)(c)
(c) Soil samples from the test pits shall be collected and analyzed at each significant change in soil characteristics or lithology for the following:
NR 214.20(5)(c)1.
1. Soil textural classification in accordance with the unified soil classification system as specified in ASTM standard D-2487-85.
NR 214.20(5)(c)2.
2. Particle size analysis performed in accordance with ASTM D422-72 to determine particle size distribution. With department approval, soil samples may be composited, or the particle size determined by a sieve analysis to reduce repetitive testing of similar soil samples.
NR 214.20(5)(c)3.
3. The soil moisture holding capacity by direct measurement or as specified through reference to literature values for different soil textures.
NR 214.20(5)(d)
(d) Following soil sample collection, the test pits shall be deepened to the extent practical with a backhoe to check for bedrock, the water table or for soil layers that would restrict the downward movement of water. This shall be visual check from the land surface, unless the test pits are protected from caving in accordance with U.S. occupational safety and health administration requirements. All soil test pits shall be refilled with excavated material following deepening for the bedrock, water table and impervious layer check.
NR 214.20(6)
(6) Treatment systems with required groundwater monitoring. For land treatment systems where groundwater monitoring wells are required, the soils evaluation shall contain the following information and investigation, at a minimum:
NR 214.20(6)(a)
(a) A preliminary site investigation report shall be assembled that contains the site location, soil survey, soil cation exchange capacity and soil nutrient content information as specified for landspreading systems in sub.
(4). Also, a limited number of test pits may be constructed to provide preliminary soils information, such as that specified in sub.
(5).
NR 214.20(6)(b)
(b) The treatment system owner or operator shall submit the results of the preliminary site investigation and propose a full scale treatment site investigation plan.
NR 214.20(6)(c)
(c) The full scale treatment site investigation shall consist of a combination of soil test pits and soil borings to adequately define the soil, groundwater and bedrock conditions at the site.
NR 214.20(6)(c)1.
1. Prior to construction of test pits and soil borings, the treatment site owner or operator and the department shall agree on the number and location of soil borings and test pits dependent upon the size of the site and uniformity of soils and geology.
NR 214.20(6)(c)3.
3. The soil sampling in borings shall be performed in accordance with ASTM D1586-84 or ASTM D1587-83.
NR 214.20(6)(c)4.
4. The soil borings shall extend to the groundwater table, be terminated upon encountering bedrock, or be drilled to a minimum depth agreed upon in the preliminary site investigation plan. The department may require the borings to extend to a minimum depth of 25 feet below the final base grade of the land treatment system when groundwater or bedrock is not encountered first.
NR 214.20(6)(d)
(d) Soil samples which are above the normal groundwater level and are contained in the unsaturated zone shall be collected from the test pits and soil borings and analyzed at each significant change in soil characteristics or lithology as specified in sub.
(5) (c). Hydrogeologic testing requirements are specified in s.
NR 214.21 (2) (e).
NR 214.20(7)
(7) High rate absorption pond systems. For absorption pond systems having a design hydraulic application rate greater than 10,000 gpd/acre, the minimum soil, groundwater and bedrock related information and requirements are those listed in sub.
(6), with the following additional requirements:
NR 214.20(7)(a)
(a) At least 2 saturated hydraulic conductivity tests shall be performed on the soils located at the final base grade of the system using a field permeability test. In some cases, the department may allow laboratory permeability tests on hydrated and saturated samples compacted at the same approximate density as exists in the in-field condition. These laboratory tests may be performed on molded or core samples, and separate tests shall be performed using tap water, wastewater or sludge extract. The permeability shall be based on stabilized inflow and outflow rates during the test. All preparation work and information detailing the test apparatus shall be submitted along with all results obtained.
NR 214.20(8)
(8) Data presentation. The results from the subsurface investigation shall be presented in accordance with ch.
NR 108 as follows:
NR 214.20(8)(a)
(a) Existing site conditions and surrounding natural and man-made conditions shall be presented on a baseline topographic map.
NR 214.20(8)(b)
(b) Cross-sections shall be developed and presented to illustrate subsurface geologic and geomorphic conditions. At least one cross-section shall be developed parallel to groundwater flow. The cross-sections shall present documented and inferred stratigraphic, soil, groundwater and bedrock conditions of the site. Soil test pit and soil boring information shall be correlated to each cross-section developed.
NR 214.20 History
History: Cr.
Register, June, 1990, No. 414, eff. 7-1-90; am. (5) (c) 1.,
Register, April, 1991, No. 424, eff. 5-1-91.
NR 214.21
NR 214.21
Groundwater monitoring requirements. NR 214.21(1)(1)
Applicability. The department may require the generator of a liquid waste, the owner or operator of a liquid waste land treatment system or an independent liquid waste-handling contractor, if applicable, to design and install a groundwater monitoring well system depending upon the type and strength of liquid waste, the volume of discharge, the type of land treatment system, the rate of discharge to the land treatment system and the site characteristics of the land treatment system. This section applies to discharges of liquid wastes and does not apply to sites used for spreading sludge or by-product solids; groundwater monitoring may be required around sludge or by-product solid spreading sites in special cases as specified in s.
NR 214.05.
NR 214.21(1)(a)
(a) For land treatment systems which receive liquid wastes and have a flow to land treatment equal to or greater than 1.0 million gallons per day, the generator of the wastewater, the independent contractor who uses the system or the owner or operator of the system shall install a comprehensive multi-level groundwater monitoring system. The monitoring system shall contain one or more well nests to monitor groundwater elevation, flow and quality.
NR 214.21(1)(b)
(b) For absorption pond, ridge and furrow, spray irrigation and subsurface absorption systems which receive any type of liquid waste and have a flow to land treatment of 15,000 gallons per day or more, but less than 1.0 million gallons per day, the generator of the wastewater, the independent contractor who uses the system or the owner or operator of the system shall install a single level groundwater monitoring system.
NR 214.21(1)(c)
(c) The department may require the generator of the liquid waste, an independent contractor who uses the system or the owner or operator of a land treatment system which receives any flow of liquid wastes to install a single level or a multi-level groundwater monitoring well system. Factors to be considered for this determination include waste strength and characteristics, volume of waste, dosage schedule, geology of the area (depth to groundwater and bedrock), soil type, and the ratio of the groundwater flow velocity to the hydraulic application rate.
NR 214.21(1)(d)
(d) The department may waive the requirement to install a groundwater monitoring well system for a land treatment system. Factors to be considered for granting this waiver may include: whether the system is operated at nutrient and hydraulic application rates which do not exceed the agronomic needs of the cover crop, whether the geology, soils and proposed hydraulic loading rate indicate that groundwater contamination is unlikely, the ratio of the groundwater flow velocity to the hydraulic application rate and the density of the waste material.
NR 214.21(2)
(2) Design, construction, installation, testing, documentation and abandonment of monitoring wells. NR 214.21(2)(a)
(a) Groundwater monitoring systems shall be installed in accordance with approved plans and specifications. The department will accept plans and specifications prepared by and submitted under the signature of a qualified hydrogeologist, soil scientist, engineer or other qualified individual. Qualifications shall include a degree from an accredited institution of higher education and field experience on soil investigation, interpretation and classification of geologic or hydrogeologic information.
NR 214.21(2)(b)
(b) Minimum acceptable standards for the design, construction, installation, documentation, development and abandonment of groundwater monitoring wells shall be in accordance with ch.
NR 141.
NR 214.21(2)(c)
(c) The groundwater monitoring well system shall consist of an adequate number of wells to define groundwater flow direction and to judge the groundwater impacts from land treatment on the site. A background monitoring well shall be located upgradient and far enough away from the land treatment system that no impact from the treatment system is measured. The other monitoring wells shall be located downgradient from the land treatment system in the possible directions of groundwater flow. In the event the groundwater flow direction is not known, the department may require the downgradient wells to be installed approximately equal distance from each other and around the perimeter of the system.
NR 214.21(2)(d)
(d) Downgradient groundwater monitoring wells shall be located at least 10 feet beyond the outer edge of the waste application area. The department may require monitoring wells to be placed within, at or beyond the land treatment system design management zone.
NR 214.21(2)(e)
(e) The groundwater monitoring wells shall be tested to provide information on the hydrogeology of the site.
NR 214.21(2)(e)1.
1. The saturated hydraulic conductivity of the aquifer around at least 3 of the monitoring wells shall be estimated by performing in-field tests. All preparation work, analysis and information describing the use of the in-field test shall be submitted along with the results obtained. The test shall be of sufficient duration and include enough data to provide a representative estimate of the actual hydraulic conductivity.
NR 214.21(2)(e)2.
2. The horizontal and, if possible, the vertical hydraulic gradient shall be calculated using measured groundwater elevations from on-site wells.
NR 214.21(2)(e)3.
3. The aquifer thickness and type of bedrock shall be determined through use of reliable reference material or by actual measurement.
NR 214.21(2)(f)
(f) As-built plans shall be submitted to the department after the wells are installed. The plans shall contain the following information:
NR 214.21(2)(f)1.
1. A map shall be drawn to a specific scale and indicate the location of the land treatment system, all well location and elevation requirements as specified in s.
NR 141.065, and the direction of groundwater flow. Land surface contours of the land treatment system and the elevations of the groundwater shall be referenced to the U.S. geological survey or the U.S. national geodetic survey.
NR 214.21(3)
(3) Plan map. An 8
1/
2′′ by 11
′′ plan map drawn to scale according to a horizontal grid system shall be submitted that indicates the location of the land treatment system, the adjacent property boundaries and the location of all wells, wetlands, streams and lakes within 0.5 miles of the land treatment system.
NR 214.21(4)
(4) Groundwater sample collection, analysis and monitoring requirements. NR 214.21(4)(a)
(a) All groundwater monitoring well samples shall be collected, preserved and analyzed in accordance with procedures specified by the department in the“groundwater sampling guidelines," dated February 1987, and in accordance with s.
NR 140.16.
NR 214.21(4)(b)
(b) All groundwater samples, except those analyzed for volatile organic compounds, shall be filtered through a standard 0.45 micron filter prior to analysis. If the groundwater sample is to be analyzed for metals, filtering shall be performed in the field immediately following sample collection. For all other types of analysis, filtering shall be performed in the field immediately following sample collection, unless the sample is cooled to 4
°
C and filtering is performed at the laboratory within 24 hours of sample collection.
NR 214.21(4)(c)
(c) Sulfuric acid preservation of groundwater samples to be analyzed for the nitrogen series and nitric acid preservation of groundwater samples to be analyzed for metals shall be performed immediately after the sample is filtered.
NR 214.21(4)(d)
(d) Monitoring shall be in accordance with the requirements of the plan approval or WPDES permit. For seasonal operations, groundwater monitoring shall be performed at a minimum of once prior to the startup of the land treatment system and 2 times during or within 2 months after the time the wastewater treatment system is used. The department shall specify in the WPDES permit the month during which the groundwater monitoring is to be performed and may adjust the frequency of groundwater monitoring for any land treatment system on a case-by-case basis.