DHS 163.20(8)(a)2.p.
p. Discuss the advantages and disadvantages of different lead hazard reduction activities.
DHS 163.20(8)(a)2.q.
q. Describe exterior abatement activities, including soil-lead abatement options.
DHS 163.20(8)(a)2.r.
r. Discuss engineering controls and work practice issues specific to exterior lead-based paint projects.
DHS 163.20(8)(a)2.s.
s. Perform a job site preparation and set-up for an exterior abatement project.
DHS 163.20(8)(a)2.u.
u. Discuss requirements for pre-cleaning and daily cleaning of abatement work areas, including worker pathways.
DHS 163.20(8)(a)3.
3. `Lead abatement supervision course.' A lead abatement supervision course shall provide a minimum of 16 training hours only to persons who have successfully completed lead abatement worker training and meet the requirements of s.
DHS 163.10 for certification. The course shall include lectures, demonstrations, hands-on skills assessment, a course review and a written course test. The course shall provide a minimum of 6 hours of hands-on practice and hands-on skills assessment, and instruction and materials that address all of the following student learning goals and objectives:
DHS 163.20(8)(a)3.b.
b. Discuss each of the major responsibility areas necessary to successfully manage lead abatement projects.
DHS 163.20(8)(a)3.c.
c. Describe basic supervisory techniques and responsibilities for lead hazard reduction projects.
DHS 163.20(8)(a)3.d.
d. Discuss the role the site supervisor plays in community relations and occupant protection.
DHS 163.20(8)(a)3.f.
f. Describe the various options for controlling interior, exterior and soil lead hazards.
DHS 163.20(8)(a)3.g.
g. Determine appropriate lead hazard reduction methods for interior, exterior and soil hazards.
DHS 163.20(8)(a)3.n.
n. Discuss employer responsibilities for worker training and protection under
29 CFR 1926.62, lead in construction regulations issued by the U.S. occupational safety and health administration.
DHS 163.20(8)(a)3.p.
p. Discuss requirements for lead hazard reduction measures under
24 CFR Part 35, HUD requirements for notification, evaluation and reduction of lead-based paint hazards in federally owned residential property and housing receiving federal assistance.
DHS 163.20(8)(a)3.r.
r. Discuss liability and insurance issues as they relate to lead hazard reduction work.
DHS 163.20(8)(a)3.s.
s. Interpret risk assessment and inspection reports as they apply to planned lead hazard reduction activities.
DHS 163.20(8)(a)3.t.
t. Describe the standards for registered lead-free property and registered lead-safe property registration.
DHS 163.20(8)(a)3.w.
w. Select appropriate paint types for various conditions and locations in a housing unit.
DHS 163.20(8)(a)3.y.
y. Determine the appropriate type and amount or number of tools, equipment, supplies, materials and replacement components necessary to perform given lead hazard reduction activities.
DHS 163.20(8)(a)3.z.
z. Determine the set-up work required for various lead hazard reduction projects.
DHS 163.20(8)(a)3.za.
za. Determine the lead hazard reduction methods most appropriate for various lead hazards.
DHS 163.20(8)(a)3.zd.
zd. Write contract specifications for the planned lead-based paint hazard reduction activity.
DHS 163.20(8)(a)3.zf.
zf. Complete an occupant protection plan for the planned lead-based paint hazard reduction activity.
DHS 163.20(8)(a)3.zm.
zm. List the records that must be kept by the employer for lead hazard reduction activities.
DHS 163.20(8)(a)3.zn.
zn. Describe the requirements for determining if an encapsulant will adhere properly.
DHS 163.20(8)(a)4.
4. `Lead project design course.' A lead project design course shall provide a minimum of 8 training hours only to persons who have successfully completed lead abatement supervisor training and meet the requirements of s.
DHS 163.10 for certification. The course shall include lectures, demonstrations, student participation, a course review and a written course test. The course shall provide instruction and materials that address all of the following student learning goals and objectives:
DHS 163.20(8)(a)4.b.
b. Explain the uses and values of inspection and risk assessment report to the project designer.
DHS 163.20(8)(a)4.c.
c. Identify indications of incomplete or inaccurate inspection and risk assessment reports.
DHS 163.20(8)(a)4.d.
d. Identify the elements of a lead-based paint abatement design or project plan and describe a typical way of creating it.
DHS 163.20(8)(a)4.e.
e. Explain the importance of writing specifications for a lead hazard reduction project.
DHS 163.20(8)(a)4.h.
h. Describe and discuss the advantages and disadvantages of different lead-based paint abatement strategies.
DHS 163.20(8)(a)4.i.
i. Explain when it is appropriate to use temporary lead hazard reduction methods and when it is appropriate to use abatement.
DHS 163.20(8)(a)4.j.
j. Describe the procedures used for final cleanup after lead-based paint abatement activities.
DHS 163.20(8)(a)4.k.
k. Describe the procedures for interior dust-lead reduction and explain how those procedures differ from final cleanup procedures.
DHS 163.20(8)(a)4.L.
L. Describe the relationship between modernization and lead hazard reduction programs in federal housing.
DHS 163.20(8)(a)4.m.
m. Describe how lead hazard reduction programs are integrated into other remodeling activities in the federal housing program.
DHS 163.20(8)(a)4.p.
p. Outline the requirements of an effective containment system for interior lead-based paint abatement projects.
DHS 163.20(8)(a)4.q.
q. Outline the requirements of an effective containment system for exterior lead-based paint abatement projects.
DHS 163.20(8)(a)4.r.
r. Outline the requirements of an effective containment system for soil abatement projects.
DHS 163.20(8)(a)4.s.
s. Describe clearance testing procedures for lead-based paint abatement projects in multi-family housing.
DHS 163.20(8)(a)4.t.
t. Describe the appropriate response to clearance failures on large lead-based paint projects.
DHS 163.20(8)(b)
(b)
Required learning objectives for courses leading to certification in lead investigation disciplines. An accredited training course that meets a training requirement under s.
DHS 163.11 for certification as a lead sampling technician, lead inspector, lead hazard investigator or lead risk assessor shall teach work practice standards that are consistent with s.
DHS 163.14 for lead investigation activities. A training course shall be based on department-approved curricula and shall meet or exceed the applicable minimum curriculum requirements, including both the minimum number of course training hours and the minimum number of hands-on training hours, as follows:
DHS 163.20(8)(b)1.
1. `Lead sampling course.' A lead sampling course shall provide a minimum of 8 training hours. The course shall include lectures, demonstrations, a minimum of 3 hours of hands-on practice and hands-on skills assessment, a course review and a written course test. The course shall provide instruction and materials that address all of the following student learning goals and objectives:
DHS 163.20(8)(b)1.a.
a. Describe the health effects of lead exposure and the particular danger lead poses to children under age 6.
DHS 163.20(8)(b)1.d.
d. Describe the differences in roles and responsibilities of a lead sampling technician, risk assessor, hazard investigator and inspector.
DHS 163.20(8)(b)1.e.
e. Explain the purposes of lead sampling and appropriate situations for performing lead sampling.
DHS 163.20(8)(b)1.f.
f. Identify the following lead-based paint hazards: visible dust, paint chips, painted debris and deteriorated paint.
DHS 163.20(8)(b)1.L.
L. Identify the appropriate locations for taking dust wipe samples to clear a given project.
DHS 163.20(8)(b)1.m.
m. Describe the methods used to ensure that sampling media are not contaminated.
