This is the preview version of the Wisconsin State Legislature site.
Please see http://docs.legis.wisconsin.gov for the production version.
DHS 159.27(1)(b)3. 3. Deny contingent accreditation. If the department determines that the training course as described in written materials is not in compliance with this chapter and does not meet the requirements for accreditation, the department may deny contingent accreditation and shall provide the applicant with written notification of the reason for denial and appeal rights under subch. VI.
DHS 159.27(1)(c) (c) Number of renewals allowed for contingent accreditation. The department may renew contingent course accreditation a maximum of 2 times.
DHS 159.27(2) (2)Full accreditation. The department shall conduct an onsite in-state audit of a training course that has been granted contingent accreditation to determine whether the training course as delivered meets the training course requirements of this chapter. Based on the results of the audit, the department shall take one of the following actions:
DHS 159.27(2)(a) (a) Grant full accreditation. If the department determines that the training course is in compliance with this chapter and meets the requirements for full accreditation the department shall issue the training provider a certificate of full accreditation to replace the certificate of contingent accreditation. The course expiration date shall remain the same.
DHS 159.27(2)(b) (b) Continue contingent accreditation. If the department determines that the training course is not in compliance with this chapter and does not meet the requirements for full accreditation, the department may allow contingent accreditation to remain in effect to allow the training provider to bring the course into compliance.
DHS 159.27(2)(c) (c) Suspend or revoke accreditation. If the department determines that the training course is not in compliance with this chapter the department may suspend or revoke the course contingent accreditation and shall provide the applicant with written notification of the reason for suspension or revocation and appeal rights under subch. VI.
DHS 159.27(3) (3)Compliance audits. In addition to audits conducted to determine full accreditation, the department may conduct onsite audits of any accredited training course to determine compliance with this chapter.
DHS 159.27(4) (4)Conduct of audits. A training provider, instructor or other provider representative may not deny department representatives entry to a training class or place of business to conduct an audit.
DHS 159.27(4)(a) (a) An audit may review any of the following:
DHS 159.27(4)(a)1. 1. Records.
DHS 159.27(4)(a)2. 2. Facilities.
DHS 159.27(4)(a)3. 3. Instructional curriculum.
DHS 159.27(4)(a)4. 4. Classroom instruction.
DHS 159.27(4)(a)5. 5. Classroom and time management.
DHS 159.27(4)(a)6. 6. Course test administration and security procedures.
DHS 159.27(4)(b) (b) The department may require a training provider to submit to the department records required under s. DHS 159.19 (7) (b) for purposes of determining compliance.
DHS 159.27(4)(c) (c) Within 60 calendar days after completing an audit, the department shall notify the training provider in writing of the audit results.
DHS 159.27 History History: CR 08-036: cr. Register February 2009 No. 638, eff. 5-1-09.
DHS 159.28 DHS 159.28Training course accreditation effective dates and expiration dates.
DHS 159.28(1) (1)Effective dates. Original or renewed course accreditation is effective on the date the department issues the accreditation certificate.
DHS 159.28(2) (2)Expiration dates. Course accreditation expires as follows.
DHS 159.28(2)(a) (a) Except as provided under par. (c), original course accreditation expires one year after the course accreditation issue date.
DHS 159.28(2)(b) (b) Except as provided under par. (c), renewed accreditation expires as follows:
DHS 159.28(2)(b)1. 1. When an application for accreditation renewal is submitted to the department before the current course accreditation expiration date, the renewed course accreditation expires one year from the date the current course accreditation expires.
DHS 159.28(2)(b)2. 2. When an application for accreditation renewal is submitted to the department within 12 months after the course accreditation expiration date the renewed course accreditation expires one year after the renewal issue date.
DHS 159.28(2)(c) (c) Accreditation of a training course that is in effect on May 1, 2009 shall expire one year after May 1, 2009.
DHS 159.28(3) (3)Expired accreditation.
DHS 159.28(3)(a)(a) To obtain accreditation for a course that has been expired for more than 12 months, the training provider shall submit application for contingent accreditation under s. DHS 159.24.
DHS 159.28(3)(b) (b) A training provider may not conduct a training course if accreditation for the course is expired.
DHS 159.28 History History: CR 08-036: cr. Register February 2009 No. 638, eff. 5-1-09.
DHS 159.29 DHS 159.29Curriculum requirements for exterior asbestos worker course. The training course for the exterior asbestos worker discipline shall be one training day in length. Course instruction shall include: lecture, supplemented with audiovisual materials, and learning exercises and activities; at least 3 hours of hands-on skills training and practice; course review with time to answer questions; a written course test that meets requirements under s. DHS 159.22 (16); and time to assist students to complete the department application for certification. Course instruction for the exterior asbestos worker discipline shall address all of the following topics:
DHS 159.29(1) (1)Asbestos characteristics. The physical characteristics of asbestos, including all of the following:
DHS 159.29(1)(a) (a) Identification of asbestos.
DHS 159.29(1)(b) (b) Aerodynamic characteristics.
DHS 159.29(1)(c) (c) Friable and non-friable asbestos-containing materials.
DHS 159.29(1)(d) (d) Typical asbestos uses on the exterior of structures including NESHAP category I and II non-friable asbestos-containing material (e.g., built-up roofing materials, cementitious roofing materials, cementitious siding materials) and incidental asbestos-containing exterior building products.
DHS 159.29(1)(e) (e) Overview of abatement control options.
DHS 159.29(2) (2)Health effects. Potential health effects related to asbestos exposure, including all of the following:
DHS 159.29(2)(a) (a) The nature of asbestos-related diseases.
DHS 159.29(2)(b) (b) Dose-response relationship and lack of a safe exposure level.
DHS 159.29(2)(c) (c) Synergistic effect between cigarette smoking and asbestos exposure.
DHS 159.29(2)(d) (d) Routes of exposure.
DHS 159.29(2)(e) (e) Latency period of asbestos-related diseases.
DHS 159.29(2)(f) (f) Relationship of asbestos exposure to asbestosis, lung cancer, mesothelioma, and cancers of other organs.
DHS 159.29(3) (3)Personal protective equipment. The use of personal protective equipment, including all of the following:
DHS 159.29(3)(a) (a) Classes and characteristics of respirators, including respirator protection factors.
DHS 159.29(3)(b) (b) Limitations of respirators.
DHS 159.29(3)(c) (c) Proper respirator selection, inspection, donning, use, maintenance, and storage procedures.
DHS 159.29(3)(d) (d) Selection of cartridges.
DHS 159.29(3)(e) (e) Methods for field testing of the face piece-to-face seal, including positive and negative pressure fit checks.
DHS 159.29(3)(f) (f) Qualitative and quantitative fit testing procedures.
DHS 159.29(3)(g) (g) Variability between field and laboratory protection and factors that alter respirator fit, such as facial hair.
DHS 159.29(3)(h) (h) Components of a proper respiratory protection program and employer responsibilities.
DHS 159.29(3)(i) (i) Selection and use of disposable and non-disposable personal protective clothing.
DHS 159.29(3)(j) (j) Regulations covering personal protective equipment.
DHS 159.29(3)(k) (k) A demonstration of donning, fit checking and fit testing.
DHS 159.29(3)(L) (L) Hands-on skills training and practice in the following:
DHS 159.29(3)(L)1. 1. Selecting proper respirators and cartridges.
DHS 159.29(3)(L)2. 2. Inspecting, disassembling, cleaning and assembling half-face respirators.
DHS 159.29(3)(L)3. 3. Donning and doffing personal protective clothing.
DHS 159.29(4) (4)Medical monitoring. Medical monitoring, including worker protection requirements under OSHA and EPA for physical examinations, pulmonary function test, chest e-rays and medical history for each employee.
DHS 159.29(5) (5)Exterior abatement work practices. State-of-the-art work practices for exterior abatement projects, including all of the following:
DHS 159.29(5)(a) (a) Proper construction and maintenance of regulated areas.
DHS 159.29(5)(b) (b) Positioning of warning signs.
DHS 159.29(5)(c) (c) Sealing openings to the building.
DHS 159.29(5)(d) (d) Proper working techniques for minimizing fiber release.
DHS 159.29(5)(e) (e) Use of wet methods.
DHS 159.29(5)(f) (f) Use of HEPA vacuums.
DHS 159.29(5)(g) (g) Proper clean-up and disposal procedures.
DHS 159.29(5)(h) (h) Work practices for removal, enclosure and repair of asbestos-containing material.
DHS 159.29(5)(i) (i) Emergency procedures for sudden releases.
DHS 159.29(5)(j) (j) Potential exposure issues.
DHS 159.29(5)(k) (k) Transport and disposal procedures.
DHS 159.29(5)(L) (L) Recommended and prohibited work practices.
DHS 159.29(5)(m) (m) Controlling for possible impact of roofing and siding activities on interior asbestos-containing materials.
DHS 159.29(5)(n) (n) Proper use of power equipment and other tools.
DHS 159.29(5)(o) (o) Proper waste handling and disposal, including systems for lowering roofing and siding materials to minimize breakage.
DHS 159.29(5)(p) (p) Decontamination requirements.
DHS 159.29(5)(q) (q) Hands-on skills training and practice in the following:
DHS 159.29(5)(q)1. 1. Establishing regulated areas.
DHS 159.29(5)(q)2. 2. Positioning warning signs.
DHS 159.29(5)(q)3. 3. Selecting proper tools.
DHS 159.29(5)(q)4. 4. Using wet methods.
DHS 159.29(5)(q)5. 5. Proper use of HEPA vacuums.
DHS 159.29(5)(q)6. 6. Waste handling and disposal.
DHS 159.29(5)(q)7. 7. Decontamination of tools and person.
DHS 159.29(6) (6)Personal hygiene. Personal hygiene, including all of the following:
DHS 159.29(6)(a) (a) Entry and exit procedures for the work area.
DHS 159.29(6)(b) (b) Proper use of decontamination.
Loading...
Loading...
Published under s. 35.93, Stats. Updated on the first day of each month. Entire code is always current. The Register date on each page is the date the chapter was last published.