ATCP 93.050 Note
Note: Section
ATCP 93.130 requires marine-craft tank vehicles to have a material approval before being placed into service.
ATCP 93.050(70)
(70) “
Mechanical monitoring” means a mechanical device not dependent upon electricity, installed to monitor tanks and piping for leaks.
ATCP 93.050 Note
Note: An example is a mechanical line leak detector.
ATCP 93.050(71)
(71) “
Monthly monitoring” means an approved electronic or non-electronic method of testing a tank or pipe for a leak at least monthly. The test shall detect a 0.2 gallon per hour leak rate with a probability of detection of 0.95 and a probability of false alarm of 0.05. For purposes of monitoring on a monthly cycle, the department will accept tests no further than 30 days apart.
ATCP 93.050(72)
(72) “
Motor fuel” means flammable or combustible liquid that is used in the operation of an internal combustion or turbine engine.
ATCP 93.050(73)
(73) “
Motor vehicle” means a self-propelled motor-driven vehicle that is used for moving people or products on land, water or air, except this term does not include any vehicle which is operated exclusively on a rail. “Motor vehicle” in this definition is intended to apply to motorized equipment transporting people and goods for pleasure, construction or commerce, rather than equipment dedicated to warehousing and yard operations, such as forklifts; or for grounds and facility maintenance, such as lawnmowers; or for amusement facilities, such as go-carts.
ATCP 93.050 Note
Note: Based on this definition, fuel storage tanks on a railroad train or other motorized equipment which operates exclusively on a rail are regulated under this chapter and NFPA 30 as non-vehicle fueling tanks, and NFPA 30A does not apply to them.
ATCP 93.050(74)
(74) “
New” means installed or constructed on or after November 1, 2019.
ATCP 93.050(75)
(75) “
Non-discriminating” means not discriminating as to the type of liquid.
ATCP 93.050(76)
(76) “
Obvious release” means there is an indication of a release, and there is both environmental evidence, such as soil discoloration, observable free product, or odors — and a known source, such as a tank or piping with cracks, holes or rust plugs, or leaking joints.
ATCP 93.050 Note
Note: See sub. (62) for a definition of “leak,” sub. (103) for a definition of “release” and sub. (113) for a definition of “suspected release.”
ATCP 93.050(77)
(77) “
Oil-burning equipment” means an oil burner of any type, together with its tank, piping, wiring, controls and related devices, and including all oil burners, oil-fired units and heating and cooking appliances.
ATCP 93.050(78)
(78) “
Operational life” means the period beginning when installation of the tank system has commenced and extending to when the tank system either is closed in accordance with s.
ATCP 93.460 or
93.560, or undergoes a change in service to store a non-regulated substance in accordance with s.
ATCP 93.450 or
93.550.
ATCP 93.050(79)
(79) “
Operator” means any person in control of, or having responsibility for, the daily operation of a storage tank system.
ATCP 93.050(80)(a)
(a) In the case of an in-use storage tank system, any person who owns at least the tank storage portion of a storage tank system used for storage or dispensing of regulated substances, or the person owning the property on which the storage tank system is located.
ATCP 93.050(80)(b)
(b) In the case of a storage tank system not in use, any person who owned at least the tank storage portion of the storage tank system immediately before the discontinuation of its use, or the person owning the property on which the storage tank system is located.
ATCP 93.050(81)
(81) “
Person” means an individual, trust, firm, joint stock company, federal agency, corporation, state, municipality, commission, political subdivision of a state, or any interstate body, and includes a consortium, joint venture, commercial entity, and the United States government.
ATCP 93.050(82)
(82) “
Petroleum” means crude oil, crude oil fractions, and refined petroleum fractions, including gasoline, kerosene, heating oils, and diesel fuels.
ATCP 93.050(83)
(83) “
Petroleum storage tank system” means a storage tank system that primarily contains petroleum products, such as motor fuels, jet fuels, fuel oils, lubricants, petroleum solvents, and used oil.
ATCP 93.050(84)
(84) “
Pier” means any structure, such as a dock, which extends into navigable waters from the shore, with water on both sides, and which is built or maintained for the purpose of servicing watercraft, providing a berth for watercraft, or for loading or unloading cargo or passengers onto or from watercraft. A pier may be an open deck or solid-fill structure.
ATCP 93.050(85)
(85) “
Pipe” or “piping” means a pressure-tight cylinder used to convey, transfer or move a fluid, and is ordinarily designated “pipe” in applicable material specifications. Materials designated as tube or tubing in the specifications are considered pipe when intended for pressure service. This term includes pipe emanating from or feeding storage tanks, or transferring product to or from storage tanks.
ATCP 93.050(85m)
(85m) “Pipeline facilities,” including gathering lines, means new and existing pipe rights-of-way and any equipment, facilities, or buildings.
ATCP 93.050(86)
(86) “
Pipe system” or “piping system” means the primary piping, secondary containment, leak detection devices, tubing, including suction line drop tube, flanges, bolts, gaskets, valves, fittings, flexible connectors, the pressure-containing parts of other components such as expansion joints and strainers, and devices that serve such purposes as mixing, separating, distributing, metering, or controlling flow, and any core components which allow the piping system to function as intended and in accordance with the installation requirements.
ATCP 93.050 Note
Note: For a typical underground system, the pipe system would be from the point of connection at the tank to the connection to the dispenser, immediately downstream of the emergency shutoff valve.
ATCP 93.050(89)
(89) “
Point-of-sale” or “POS” means a marketing or dispensing practice that accommodates a cash, credit card, key, personal identification number or similar dispenser-authorized transfer of fuel into a motor vehicle without the direct oversight, supervision or intervention of an employee of the fueling facility.
ATCP 93.050(90)
(90) “
Precision tightness testing” or “precision tightness test” means a procedure for testing the ability of a tank system to prevent a release of a regulated substance, that is capable of detecting a 0.1 gallon per hour leak rate with a probability of detection of 0.95 and a probability of false alarm of 0.05.
ATCP 93.050(91)
(91) “
Pressurized piping” means product piping that experiences product pressure above normal atmospheric pressure. Product pressure may be generated from a pump or static head of an aboveground storage tank.
ATCP 93.050(92)
(92) “
Pressurized system” or “remote pumping system” means a dispensing system where the pump is not located at, or is remote from, the dispenser.
ATCP 93.050(93)
(93) “
Product” means any regulated substance in a storage tank.
ATCP 93.050(94)
(94) “
Public access fueling” means the use of a facility by persons who are not employees of the facility to dispense fuel into vehicles, or to transfer fuel for resale into vehicles that are not owned or operated by the facility.
ATCP 93.050(96)
(96) “
Public used-oil collection center” means any used-oil collection facility that allows an individual who is not an employee of the facility to transfer used oil from a portable container into a storage tank.
ATCP 93.050(97)
(97) “Public way” means any public thoroughfare, sidewalk, dedicated alley, railroad, waterway or right-of-way. The point of measurement is from the engineered or natural borders of the vehicle or pedestrian traffic lanes.
ATCP 93.050(98)
(98) “
Readily accessible” means capable of being reached easily and quickly for operation, maintenance and inspection.
ATCP 93.050(99)
(99) “
Re-commission” means the process of returning a system, component or process to a code-complying, in-service condition.
ATCP 93.050(100)
(100) “Recreational vehicle” means any self-propelled motor-driven vehicle that is used for moving people typically off-road, on land, snow, ice or water for sport or recreation, such as snowmobiles and all-terrain vehicles.
ATCP 93.050(101)
(101) “Red-tag” means a red tag secured to a component of a storage or dispensing system, which gives notice that the system or the product stored is under enforcement action for failure to comply with the requirements of either this chapter or ch.
ATCP 94, and which prohibits operation of the system until the tag is removed by or under the direction of the authority having jurisdiction.
ATCP 93.050(102)
(102) “Regulated substance” means any flammable or combustible liquid and any liquid that is a federally regulated hazardous substance as defined in s.
168.21, Stats.
ATCP 93.050 Note
Note: The definition of federally regulated hazardous substances in s.
168.21 (3), Stats., corresponds to the CERCLA List of Hazardous Substances and Reportable Quantities contained in
40 CFR 302.4, Table 302.4.
ATCP 93.050(103)
(103) “Release” means any discharge, including spilling, leaking, pumping, pouring, emitting, emptying, leaching, dumping or disposal of a regulated substance into groundwater, surface water or subsurface soils.
ATCP 93.050 Note
Note: See sub. (62) for a definition of “leak,” sub. (76) for a definition of “obvious release” and sub. (113) for a definition of “suspected release.”
ATCP 93.050(104)
(104) “Release detection” means determining whether a discharge of a regulated substance has occurred from a storage tank system into the environment.
ATCP 93.050(105)
(105) “Repair” means any work necessary to correct or restore a tank, pipe, spill prevention equipment, overfill prevention equipment, corrosion protection equipment, leak detection equipment, or other storage tank or dispensing system component that either has caused a suspected or obvious release or has failed to function properly.
ATCP 93.050(106)
(106) “Residential watercraft fueling facility” means that portion of a 1- or 2-family residential property where liquid fuels are stored in or dispensed for non-retail purposes from fixed equipment on land into the fuel tanks of self-propelled watercraft, including all facilities used for the storage, dispensing, and handling of flammable and combustible liquids.
ATCP 93.050(107)
(107) “Sacrificial anode system” means a method of corrosion protection that generates cathodic current from the galvanic corrosion of an expendable anode which is more electrochemically active than the structure being protected.
ATCP 93.050(108)
(108) “Secondary containment” means an approved barrier installed around a storage tank system that is designed to prevent a leak from the primary tank or piping from contacting the surrounding earth or the waters of the state before the leak can be detected and cleaned up.
ATCP 93.050(109)
(109) “Significant noncompliance” means the existence of one or more of the following:
ATCP 93.050(109)(a)
(a) A violation that causes, or may cause, a substantial, continuing risk to public health or the environment.
ATCP 93.050(109)(b)
(b) A violation that substantially deviates from a requirement of this chapter.
ATCP 93.050(109)(c)
(c) A violation that includes failure to install, maintain or operate equipment essential to preventing or detecting leaks.
ATCP 93.050(109)(d)
(d) A violation that is observed to reoccur repeatedly as a result of intentional or unintentional administrative or operational oversight.
ATCP 93.050(110)
(110) “Space heating” means heating of areas intended for occupancy or storage.
ATCP 93.050(111)
(111) “Storm water or wastewater collection system” means piping, pumps, conduits, and any other equipment necessary to collect and transport the flow of surface water run-off resulting from precipitation, or domestic, commercial, or industrial wastewater to and from retention areas or any areas where treatment is designated to occur. The collection of storm water and wastewater does not include treatment except where incidental to conveyance.
ATCP 93.050(112)
(112) “Structure” means an assembly of materials forming a construction for occupancy, storage, use, shelter or weather protection meeting the definition of place of employment under sub.
(88) or public building under sub.
(95).
ATCP 93.050 Note
Note: The department does not consider a tank to be a structure although local or municipal regulations may classify a tank as a structure.
ATCP 93.050(113)(a)
(a) There is indication that a tank system or dispensing system has leaked — such as inventory losses; observable free product or evidence of free product in secondary containment at dispensers, submersible pumps or spill buckets; petroleum odors; unexplained presence of water in a tank; or activation of a leak detection alarm system — but there is no observable environmental evidence of a release.
ATCP 93.050(113)(b)
(b) There is observable environmental evidence of a release, such as soil discoloration or free product, but the source is unknown.
ATCP 93.050 Note
Note: See sub. (62) for a definition of “leak,” sub. (76) for a definition of “obvious release” and sub. (103) for a definition of “release.”
ATCP 93.050(114)
(114) “Tank” means a device designed to contain an accumulation of regulated substance and constructed of non-earthen materials such as concrete, steel, fiberglass or plastic, and including the following types of tanks, which have the following meanings:
ATCP 93.050(114)(a)
(a) “Abandoned tank” means an aboveground or underground tank with or without product that is not recognized by this chapter as in-use, temporarily out of service, or closed.
ATCP 93.050(114)(b)
(b) “Accumulator tank” or “accumulator reservoir” means a container that is integral to a closed-loop mechanical-system operation of equipment, and that is used either to provide a regulated substance on demand, such as a fluid that is used as a heating or cooling media, or to store a regulated substance that is displaced from the functioning equipment, such as from an elevator or hydraulic lift.
ATCP 93.050 Note
Note: Accumulator tanks are outside the scope of this chapter.
ATCP 93.050(114)(c)
(c) “Breakout tank” means a tank that is used to relieve surges in an oil pipeline system or to receive and store oil transported by a pipeline for reinjection and continued transportation by a pipeline. Tanks considered by this chapter to be breakout tanks do not have piping that transfers product directly to or from a loading rack.
ATCP 93.050(114)(d)
(d) “Day tank” means an intermediate tank in a product transfer system between a storage tank and the end use of the product, usually a generator. The purpose of a day tank is to provide immediate product to the end source where the supply may otherwise be influenced by product temperature, viscosity or inadequate supply pressure.
ATCP 93.050(114)(e)
(e) “Farm tank” means a tank that is constructed in accordance with NFPA 30A section 13.2 and installed on a farm premises.
ATCP 93.050(114)(f)
(f) “Field-erected tank” means an aboveground tank that is built on the site from sections and components.
ATCP 93.050 Note
Note: See par. (p) for a definition of “fixed tank.”
ATCP 93.050(114)(g)
(g) “Gravity tank” means a supply tank from which the product is delivered directly by gravity.
ATCP 93.050(114)(h)
(h) “Integral tank” means a vessel with a liquid capacity of less than 110 gallons, which supplies fuel to an engine and which is assembled and used with the engine as a single unit of equipment.
ATCP 93.050 Note
Note: Vessels with a capacity of 110 gallons or more are included in the definition of storage tank in par. (q).
ATCP 93.050(114)(i)
(i) “Movable tank” means an aboveground storage tank that meets all of the following:
ATCP 93.050(114)(i)1.
1. Has a liquid capacity of 110 gallons or more, and is used for storing and dispensing liquid motor vehicle fuel.
ATCP 93.050(114)(i)2.
2. Is supported on skids, wheels without axles, or similar means and is not mounted upon a tank vehicle or chassis capable of road travel.
ATCP 93.050 Note
Note: Movable tanks are acceptable for use at construction projects, farms, and other locations recognized in subch. VI, where it is more practical to move the tank, typically by lifting equipment, to off-road motorized equipment for dispensing, rather than drive the motorized equipment to the tank.
ATCP 93.050(114)(j)
(j) “Multi-compartment tank” or “multi-chamber tank” means a vessel that contains 2 or more compartments created by the presence of an interior wall so that 2 or more substances can be stored at the same time within a single tank shell.
ATCP 93.050 Note
Note: In accordance with s.
ATCP 93.250, each compartment of a multi-compartment tank is considered a separate tank, even if the same substance is stored in more than one compartment.
ATCP 93.050(114)(k)
(k) “Portable tank” means an aboveground closed vessel that has a liquid capacity of 110 gallons or more; is not otherwise defined in this chapter; is equipped with skids, mountings or accessories to facilitate handling of the tank by mechanical means; and is not intended for fixed installation or for highway vehicle fueling. “Portable tank” includes intermediate bulk containers.
ATCP 93.050(114)(L)1.1. “Process tank” or “flow-through process tank” means a tank that forms an integral part of a production process through which there is a steady, variable, recurring, or intermittent flow of materials during the operation of the process and the tank is utilized to carry out or control the heating, cooling, mixing, blending, separating, metering, or chemical action of materials. The processing is done on a regular basis and it is the primary function of the tank.
ATCP 93.050(114)(L)2.
2. “Process tank” or “flow-through process tank” does not include a tank that is used for the storage of materials before their introduction into the production process or for the storage of finished products or by-products from the production process, or a tank that is only used to recirculate materials. A process tank would be considered a storage tank if the vessel is used as storage for a period exceeding 96 hours after the processing ends.
ATCP 93.050 Note
Note: Process tanks are outside the scope of this chapter.
ATCP 93.050(114)(m)
(m) “Product recovery tank” means a tank that forms an integral part of a ch.
ATCP 93 regulated substance spill control system for a storage, processing or transfer area. The purpose of the tank is spill recovery and temporary containment. A product recovery tank does not include a tank that is used for the storage of materials or by-products from a flow-through reclamation process. A product recovery tank will be considered a storage tank if the vessel is used as storage for a period exceeding 96 hours after the control of a release or spill.
ATCP 93.050 Note
Note: Product recovery tanks are outside the scope of this chapter.
ATCP 93.050(114)(n)
(n) “Residential tank” means a tank located on the same property as a 1- or 2-family dwelling or a residential building that falls within the scope of chs.
SPS 361 to
366 and used only by the residents of the property or for the maintenance of the property.
