ATCP 93.050(6)
(6) “
Ancillary equipment” means any device, including such devices as piping, fittings, flanges, valves, and pumps, that is used to distribute, meter, or control the flow of regulated substances to and from a storage tank.
ATCP 93.050(7)
(7) “
Annual” means a period of time less than or equal to 365 calendar days.
ATCP 93.050(9)
(9) “
ATV” or “all-terrain vehicle” means a self-propelled motor-driven vehicle with wheels or tracks, used to transport people on land, snow, ice or water for purposes of sport or recreation and which cannot be licensed through the department of transportation for highway use.
ATCP 93.050(9m)
(9m) “
Authority having jurisdiction” means the department or an authorized agent responsible for approving equipment, installations or procedures.
ATCP 93.050(10)
(10) “
Authorized agent” means either a local program operator or a 1st class city or the authorized representatives of a 1st class city.
ATCP 93.050 Note
Note: See sub. (66) for a definition of local program operator. As of November 1, 2019, only the City of Milwaukee is a 1st class city.
ATCP 93.050(11)
(11) “
Automatic leak detection” means a release or leak detection or monitoring system that will provide continuous 24 hour monitoring for the detection of a release or leak of vapor or product and immediately communicate the detection of the release or leak to an electronic signaling device.
ATCP 93.050(12)
(12) “
Automatic line leak detection” means a method of leak detection which alerts the operator to the presence of a leak without any manual effort on the part of the operator, including a device or mechanism that signals the presence of a leak by restricting or shutting off the flow of a hazardous substance through piping, or by triggering an audible or visual alarm, and which detects leaks of 3 gallons per hour at 10 psi line pressure within one hour.
ATCP 93.050(14)
(14) “
Biodiesel fuel” means a fuel that is comprised of monoalkyl esters of long chain fatty acids derived from vegetable oils or animal fats.
ATCP 93.050 Note
Note: Under s.
168.14 (2m) (b) 2., Stats., pure biodiesel fuel is generally identified with the alphanumeric B100, and does not contain any petroleum product, any additive, or other foreign material. A fuel that is a blend of biodiesel and petroleum-based fuel generally has a volume percentage of the biodiesel fuel to the petroleum-based fuel of at least 2 percent. B20 would identify a blend as being 20 percent biodiesel and 80 percent petroleum-based fuel, by volume.
ATCP 93.050(15)
(15) “
Bulk plant” means that portion of a facility where flammable, combustible or hazardous liquids are stored or blended in bulk for the purpose of subsequently distributing such liquids beyond that portion of the facility. This term does not include a facility where such liquids are stored or blended only in intermediate bulk containers.
ATCP 93.050(16)
(16) “
Business day” means any day Monday to Friday, excluding Wisconsin legal holidays.
ATCP 93.050(17)
(17) “
CERCLA” means the federal Comprehensive Environmental Response, Compensation, and Liability Act of 1980, as amended.
ATCP 93.050(18)
(18) “
Certified cathodic protection tester” means a person certified in accordance with this chapter who demonstrates an understanding of the principles and measurements of all common types of cathodic protection systems as applied to buried or submerged metal piping systems and metal tanks.
ATCP 93.050(19)
(19) “
Certified corrosion expert” means a person certified in accordance with this chapter who is qualified to engage in the practice of corrosion control on buried or submerged metal piping systems and metal tanks by reason of thorough knowledge of the physical sciences and the principles of engineering and mathematics acquired by a professional education and related practical experience.
ATCP 93.050(21)(a)
(a) For aboveground tank systems, a person certified in accordance with this chapter to install and repair aboveground storage tank systems — and for underground tank systems, a person certified in accordance with this chapter to install and repair underground storage tank systems.
ATCP 93.050(21)(b)
(b) A registered professional engineer who directly supervises an installation by being present during the activities specified in s.
ATCP 93.240 (16) and
(17), and who is competent in the engineering methods and requirements in Wisconsin for designing and installing storage tank systems for flammable, combustible or hazardous liquids.
ATCP 93.050(22)
(22) “
Certified remover-cleaner” means a person certified in accordance with this chapter to remove storage tank systems and to remove accumulated sludge and remaining product from tanks that are to be closed, undergo a change in service, or otherwise be completely emptied and made inert.
ATCP 93.050(22m)
(22m) “Certified tank system inspector” means a person certified in accordance with this chapter to inspect storage tank systems.
ATCP 93.050(23)
(23) “
Certified tank system liner” means a person certified in accordance with this chapter to install interior linings for storage tanks.
ATCP 93.050(24)
(24) “
Certified tank system site assessor” means a person certified in accordance with this chapter to conduct tank system site assessments and to collect samples necessary for those assessments.
ATCP 93.050(25)
(25) “
Certified tank system tightness tester” means a person certified in accordance with this chapter to perform precision tightness testing to determine the presence of leaks in storage tank systems.
ATCP 93.050(26)
(26) “
Change in service” means continued use of a storage tank system in another regulated status, or continued use of a tank that previously stored a regulated substance, to store a non-regulated substance; or continued use of a tank that previously stored a non-regulated substance, to store a regulated substance.
ATCP 93.050 Note
Note: An example of a “change in service” to another regulated status is an in-use tank that moves to temporarily out of service status. An example of “change in service” resulting from previously storing a regulated substance, to storing a non-regulated substance is a tank that is converted from storing heating oil to storing water.
ATCP 93.050 Note
Note: See sub. (30) and Note for Class II and III liquids.
ATCP 93.050(28)
(28) “
Cleaned tank system” means a tank system that is free of all residue and vapors.
ATCP 93.050(29)
(29) “
Closure” means the procedure by which a tank system is evaluated and permanently rendered safe from contributing to human danger, fire, explosion, and environmental contamination at the facility where it is installed.
ATCP 93.050(30)
(30) “
Combustible liquid” means a liquid having a flash point at or above 100
°F.
ATCP 93.050 Note
Note: Under NFPA 30 section 4.3.2, combustible liquids are further classified as being Class II, IIIA, or IIIB liquids.
ATCP 93.050(31)
(31) “
Connected piping” means all underground piping including valves, elbows, joints, flanges, and flexible connectors attached to a tank system through which regulated substances flow. For the purpose of determining how much piping is connected to any individual underground storage tank system, the piping that joins 2 underground storage tank systems should be allocated equally between them.
ATCP 93.050(32)
(32) “
Construction project” means a site or project that is under development, renovation, or demolition and is temporary in nature and has restricted public access.
ATCP 93.050 Note
Note: A construction project may involve a transportation corridor, building or structure, excavation or landscaping, or the replacement or upgrade of an existing storage tank system.
ATCP 93.050(33)
(33) “
Consumptive use” means consumed on the premises where the storage tank system is located.
ATCP 93.050(34)
(34) “
Continuous monitoring” means a leak detection method using equipment that routinely performs the required monitoring on a periodic or cyclic basis throughout each day.
ATCP 93.050(35)
(35) “
Contractor” means a person or firm undertaking to do work or supply goods or a service.
ATCP 93.050(36)
(36) “
Day” means any calendar day unless specifically stated otherwise in this chapter.
ATCP 93.050(37)
(37) “
Department” means the department of agriculture, trade and consumer protection.
ATCP 93.050(37m)
(37m) “Direct supervision” means to assume the responsibility of an activity of others and its results by providing oversight and guidance at the site where the activity is being conducted.
ATCP 93.050(38)
(38) “
Dispenser” means a device or configuration of components consisting of a motor or fluid control, and an area for storing a hose nozzle valve with or without a pump, that dispenses and measures the amount of product dispensed by means of a mechanical or electronic metering mechanism.
ATCP 93.050(39)
(39) “
Dispensing” means the transfer of fuel into a vehicle or portable container from a storage tank system.
ATCP 93.050(40)
(40) “
Dispensing area” means a zone around the dispenser that extends a distance of 20 feet horizontally from the dispenser body, exclusive of the length of the hose and nozzle.
ATCP 93.050(41)
(41) “
Dispensing system” or “product transfer system” includes the dispensers, nozzles, dispensing hoses, suction fuel pump, pipe and any necessary core components between the emergency shutoff valve and dispensing nozzle that allow the dispensing system to function as intended and in accordance with the installation requirements.
ATCP 93.050 Note
Note: In a typical fueling island, the dispensing system begins immediately downstream of the emergency shutoff valve, and all components upstream of that point, including the shut-off valve, are part of the tank system, as defined in sub. (115).
ATCP 93.050(42)
(42) “
Electronic monitoring” means an electrical device installed to monitor tanks or piping for leaks.
ATCP 93.050 Note
Note: Typically, electronic monitoring uses an audible or visual alarm and may incorporate an automatic shutdown of the dispensing system. Examples include electronic line leak detectors and sump or interstitial liquid sensors.
ATCP 93.050(43)
(43) “
Empty tank system” means a tank system from which all materials have been removed using commonly employed practices so that no more than one inch of residue remains in the system.
ATCP 93.050(43g)
(43g) “EPA” means United States environmental protection agency.
ATCP 93.050(43r)
(43r) “Equivalency” means having the same degree of safety, health, or public welfare as contained in the requirements specified in this chapter.
ATCP 93.050(44)
(44) “
Excavation zone” means the volume containing the tank system and backfill material bounded by the ground surface, walls, and floor of the pit and trenches into which the underground storage tank system is placed at the time of installation.
ATCP 93.050(45)
(45) “
Existing” means installed or in place since before November 1, 2019, unless context requires otherwise.
ATCP 93.050(46)
(46) “
Existing tank system” means a tank system used to contain an accumulation of regulated substances, or for which installation commenced, prior to November 1, 2019. Installation is considered to have commenced if the owner or operator has obtained all federal, state, and local approvals or permits necessary to begin physical construction of the tank system site or installation of the tank system, and a continuous on-site physical construction or installation program has begun.
ATCP 93.050(47)
(47) “
Facility” means a plot of land developed or designated to serve a particular function.
ATCP 93.050 Note
Note: Section
102.04 (3), Stats., reads as follows:
ATCP 93.050 Note
As used in this chapter, `farming' means the operation of farm premises owned or rented by the operator. `Farm premises' means areas used for operations herein set forth, but does not include other areas, greenhouses or other similar structures unless used principally for the production of food and farm plants. `Farmer' means any person engaged in farming as defined. Operation of farm premises shall be deemed to be the planting and cultivating of the soil thereof; the raising and harvesting of agricultural, horticultural or arboricultural crops thereon; the raising, breeding, tending, training and management of livestock, bees, poultry, fur-bearing animals, wildlife or aquatic life, or their products, thereon; the processing, drying, packing, packaging, freezing, grading, storing, delivering to storage, to market or to a carrier for transportation to market, distributing directly to consumers or marketing any of the above-named commodities, substantially all of which have been planted or produced thereon; the clearing of such premises and the salvaging of timber and management and use of wood lots thereon, but not including logging, lumbering or wood cutting operations unless conducted as an accessory to other farming operations; the managing, conserving, improving and maintaining of such premises or the tools, equipment and improvements thereon and the exchange of labor, services or the exchange of use of equipment with other farmers in pursuing such activities. The operation for not to exceed 30 days during any calendar year, by any person deriving the person's principal income from farming, of farm machinery in performing farming services for other farmers for a consideration other than exchange of labor shall be deemed farming.
ATCP 93.050(49)
(49) “
Flammable liquid” means any liquid that has a flash point below 100
°F.
ATCP 93.050 Note
Note: Under NFPA 30 section 4.3.1, flammable liquids are classified as being Class I liquids and are subclassified as Class IA, IB, or IC liquids.
ATCP 93.050(50)
(50) “
Flash point” means the minimum temperature at which a liquid will give off sufficient vapor to form an ignitable mixture with air near the surface of the liquid or within the test vessel.
ATCP 93.050 Note
Note: See NFPA 30 for the appropriate test method for a specific liquid.
ATCP 93.050(51)
(51) “
Free product” means any regulated substance that exists outside of a tank system, a dispenser system or a container for transporting the substance.
ATCP 93.050(51m)
(51m) “Hazardous liquid” means any liquid that is a federally regulated hazardous substance as defined in s.
168.21, Stats.
ATCP 93.050 Note
Note: The definition of federally regulated hazardous substances in s.
168.21 (3), Stats., corresponds to the CERCLA List of Hazardous Substances and Reportable Quantities contained in
40 CFR 302.4, Table 302.4.
ATCP 93.050(52)
(52) “
Hazardous substance storage tank system” means a storage tank system which contains a hazardous substance defined in section 101 (14) of CERCLA — but not including any substances regulated as hazardous wastes under subtitle C, or any mixture of such substances and petroleum products — and which is not a petroleum storage tank system.
ATCP 93.050(53)
(53) “
Heating device” means equipment, fueled by liquids regulated by this chapter, intended to create or generate heat for the purpose of providing direct heat or heating another media for space heating, food processing, commercial and industrial manufacturing, or energy generation.
ATCP 93.050(54)
(54) “
Heating fuel” or “heating oil” means petroleum that is No. 1, No. 2, No. 4-light, No. 4-heavy, No. 5-light, No. 5-heavy, and No. 6 technical grades of fuel oil; other residual fuel oils, including Navy Special Fuel Oil and Bunker C; and other fuels when used as substitutes for one of these, including used oil or used cooking oils when used in an oil burner to provide space heat or processing heat for consumptive use on the property.
ATCP 93.050 Note
Note: Heating fuel used to produce steam for power generation such as electricity or emergency power is not considered “heating fuel" or “heating oil" for purposes of the definition.
ATCP 93.050(55)
(55) “
Housekeeping” means a facility management activity of keeping flammable, combustible and hazardous liquid storage organized and free of debris, vegetation, combustible goods and merchandise and non-essential combustible materials or products.
ATCP 93.050(57)
(57) “Important building” or “important building or structure” means a building or structure that is not considered by the owner, the authorized agent or the department to be expendable in an exposure fire.
ATCP 93.050 Note
Note: Examples include buildings occupied by one or more persons for other than incidental use, buildings that have a high-hazard use where products from fire can harm the community or the environment, control buildings that need the presence of personnel for orderly shutdown of important or hazardous processes, buildings that contain high-value contents or critical equipment or supplies, and buildings that are sited with respect to a storage tank system such that they will have a detrimental effect on release-response or fire-control activities.
ATCP 93.050(58)
(58) “
Impressed current system” means a method of corrosion protection that generates cathodic current from an external, direct-current power source.
ATCP 93.050(59)
(59) “
Intermediate bulk container” or “IBC” means a container that is manufactured and marked in accordance with
49 CFR 178, is intended for the storage of regulated substances within warehouses and other storage areas with automatic wet-pipe sprinkler systems, and has a liquid capacity of 793 gallons or less.
ATCP 93.050(60)
(60) “
Interstitial monitoring” means a leak detection method that entails the surveillance of the space between a tank system's walls and the secondary containment system for a change in steady-state conditions.
ATCP 93.050(61)
(61) “
Inventory controls” means techniques used to identify a loss of product that are based on volumetric measurements in the tank and reconciliation of those measurements with product delivery and withdrawal records.
ATCP 93.050(62)
(62) “
Leak” means any discharge of a regulated substance from a point in a tank system or dispensing system, that is not intended to be a discharge or dispensing point.
ATCP 93.050 Note
Note: See sub. (76) for a definition of “obvious release,” sub. (103) for a definition of “release” and sub. (113) for a definition of “suspected release.”
ATCP 93.050(63)
(63) “
Leak detection” means determining whether a discharge of a regulated substance has occurred from a point in a storage tank system, that is not intended to be a discharge or dispensing point, such as a discharge into the interstitial space between the primary tank or piping and the secondary barrier or secondary containment around that tank or piping.
ATCP 93.050(64)(a)
(a) “Liquid” means any material that has both a fluidity greater than that of 300 penetration asphalt when tested in accordance with ASTM D5 at standard conditions of temperature and pressure, and a vapor pressure of 40 pounds per square inch absolute (psia) or lower at 100
°F as determined by ASTM D323 or ASTM D4953, except as excluded under par.
(c). For materials outside the scope of the ASTM D5 test, “liquid” means any material that both starts to melt at temperatures less than 100
°F and has a vapor pressure of 40 psia or lower at 100
°F, except as included under par.
(c). In this subsection, “standard conditions of temperature and pressure” means a temperature of 60
°F and a pressure of 14.7 psia.
ATCP 93.050 Note
Note: A pressure of 14.7 pounds per square inch absolute is the typical atmospheric pressure at sea level, which varies with changes in altitude and weather. Everyday pressure measurements, such as with a tire-pressure gauge, typically begin with a zero reading at the atmospheric pressure.
ATCP 93.050(64)(b)
(b) “Liquid” also means any material that is a viscous substance for which a specific melting point cannot be determined but which is determined to be a liquid in accordance with ASTM D4359, except as excluded under par.
(c).
ATCP 93.050(64)(c)
(c) “Liquid” does not include any asphalt substance that must be heated to at least 60
°F at a pressure of 14.7 pounds per square inch absolute (psia) in order to make it fluid.
ATCP 93.050 Note
Note: For example, #5 and #6 fuel oil do not meet the criteria for a liquid and therefore are not regulated by this chapter.
ATCP 93.050(65)
(65) “
Listed and labeled” means equipment or materials to which has been attached a label or identifying mark by, and which is included in a list published by, an organization acceptable to the department that is concerned with product evaluation, that maintains periodic inspections of listed and labeled equipment or materials, and by whose labeling the manufacturer indicates compliance with appropriate standards or performance for a specified purpose.
ATCP 93.050(66)
(66) “
Local program operator” or “LPO” means an entity, either public or private, under contract with the department to enforce the provisions of this chapter and provide tank system plan review and inspection services in a specific region of the state.
ATCP 93.050(67)
(67) “
Lowest floor, story, cellar or basement” means the lowest space in which heavier-than-air vapors can accumulate.
ATCP 93.050(68)
(68) “
Maintenance” means the normal operational upkeep to prevent a storage tank system from releasing product, or to maintain the structural and operational condition of any portion of the system. Maintenance activity is preventative in nature.
