A-E 4.026(2)(b)(b) A specific record of 6 or more years of experience in accordance with s. A-E 4.03 within the 10 years preceding the application in engineering work of a character satisfactory to the professional engineer section indicating that the applicant is competent to be placed in responsible charge of engineering work.
A-E 4.026(2)(c)(c) Evidence of successful completion of a fundamentals of engineering examination and a principles and practice of engineering examination, in accordance with s. A-E 4.07 (1m).
A-E 4.026(2)(d)(d) References from at least 5 individuals having personal knowledge of the applicant’s engineering work, 3 or more of whom are registered professional engineers, one of whom has served as supervisor in responsible charge of the applicant’s engineering work.
A-E 4.026(2)(e)(e) A chronological history of the applicant’s employment.
A-E 4.026(2m)(2m)NCEES record.Submission of a record that is properly executed and issued with verification by NCEES may be accepted as evidence of the information that is required by the professional engineer section.
A-E 4.03(1g)(a)(a) To qualify as satisfactory experience in engineering work for the purpose of meeting requirements of s. 443.04, Stats., an applicant’s experience shall include the application of engineering principles and data and shall demonstrate an applicant’s progressive development of competence to do engineering work.
A-E 4.03(1g)(b)(b) The experience shall be acquired under the supervision of a registered professional engineer and in the areas of engineering practice listed in subs. (1r) to (7), or acquired in other areas of engineering practice or academic course work which in the opinion of the professional engineer section provides the applicant with a knowledge of engineering principles and data at least equivalent to that which would be acquired by experience in the areas of practice listed. Experience gained under the technical supervision of an unregistered individual may be considered if the appropriate credentials of the unregistered supervisor are submitted to the professional engineer section.
A-E 4.03(1g)(c)(c) To qualify as satisfactory experience in professional engineering for purposes of ss. 443.04 (2m) (a) and (b), Stats., an applicant’s experience must be obtained subsequent to completion of the educational requirements set forth in s. 443.04 (1m), Stats. This requirement may be waived, in the sole discretion of the professional engineer section, for reasons it considers sufficient.
A-E 4.03(1g)(d)(d) Experience in all areas listed is not required. Not more than one year of satisfactory experience credit may be granted for any calendar year.
A-E 4.03(2)(a)2.2. Identifying possible design concepts or methods.
A-E 4.03(2)(a)3.3. Selecting methods to be employed in consideration of aesthetics, cost and reliability.
A-E 4.03(2)(a)4.4. Defining performance, specifications, and functional requirements such as materials, energy balances, and environmental considerations.
A-E 4.07(1m)(a)(a) The required fundamentals examination is an NCEES Fundamentals of Engineering examination.
A-E 4.07(1m)(b)(b) The required principles and practice of engineering examination is an NCEES Principles and Practice of Engineering examination, or, in the alternative, the applicant may take the NCEES Structural Engineering examination in its entirety.
A-E 4.07(6)(6)Grading of written examinations.The passing scores set by the professional engineer section represent the minimum competency required to protect public health and safety. Experience ratings may not be weighed as a part of the examinations.
A-E 4.08(2)(2) An application for registration by reciprocity from another state shall include all of the following:
A-E 4.08(2)(a)(a) Verification of registration submitted directly from all states, territories, or provinces of Canada where the applicant is or has been registered, including a statement regarding any disciplinary action taken.
A-E 4.08(2)(am)(am) References from at least 5 individuals having personal knowledge of the applicant’s engineering work 3 or more of the references shall be registered professional engineers and one of whom has served as supervisor in responsible charge of the applicant’s engineering work.
A-E 4.08(2)(c)(c) Verification of meeting the continuing education requirements set forth in s. A-E 13.09.
A-E 4.08(2)(d)(d) Any additional data, exhibits or references showing the extent and quality of the applicant’s experience that may be required by the section.
A-E 4.08(3)(3) Submission of a record that is properly executed and issued with verification by NCEES may be accepted as evidence of the information that is required by the professional engineer section.
A-E 4.08(4)(4) Reciprocity may be granted, in accordance with s. 443.10 (1) (d), Stats., to a person who holds an unexpired registration issued by an authority in any state or territory or possession of the United States or in any country in which the requirements for registration are of a standard not lower than required by the professional engineer section.
/code/admin_code/a_e/4trueadministrativecode/code/admin_code/a_e/4/03/2/a/6Examining Board of Architects, Landscape Architects, Professional Engineers, Designers, Professional Land Surveyors, and Registered Interior Designers (A-E)administrativecode/A-E 4.03(2)(a)6.administrativecode/A-E 4.03(2)(a)6.sectiontrue
Published under s. 35.93, Stats. Updated on the first day of each month. Entire code is always current. The Register date on each page is the date the chapter was last published.
