Amendment AA2-AB631

LRBa0876/1

ZDW:kjf&klm

2019 - 2020 LEGISLATURE

ASSEMBLY AMENDMENT 2, TO ASSEMBLY BILL 631

January 13, 2020 - Offered by Representative Tittl.

AB631-AA2,1,1 At the locations indicated, amend the bill as follows:

AB631-AA2,1,2 1. Page 2, line 10: delete “vehicle" and substitute “implement of husbandry".

AB631-AA2,1,6 2. Page 3, line 4: delete the material beginning with “at least" and ending with “made" on line 5 and substitute “one or more unsuccessful attempts to repair have been made and the implement of husbandry has been returned to the consumer or remains with the consumer awaiting further repair attempts”.

AB631-AA2,1,7 3. Page 3, line 7: after that line insert:

AB631-AA2,1,11 “(f) “Unsuccessful attempt to repair” means a repair attempt that does not correct the nonconformity for which the repair work is conducted and for which active repair work on the nonconformity stops and does not begin again within 24 hours of the previous repair work.”.

AB631-AA2,1,13 4. Page 4, line 13: delete that line and substitute “nonconformity to the manufacturer.”.

AB631-AA2,2,1 5. Page 4, line 14: delete lines 14 to 18.

AB631-AA2,2,2 6. Page 4, line 25: delete “manufacturer" and substitute “manufacturer.".

AB631-AA2,2,3 7. Page 5, line 1: delete lines 1 to 6.

AB631-AA2,2,10 8. Page 5, line 11: after “lessee." insert “If a manufacturer fails to disclose in writing at the time of transfer or sale to a dealer that a nonconforming implement of husbandry was returned to the manufacturer by a consumer, the manufacturer shall indemnify the dealer for all costs and expenses the dealer incurs as the result of the manufacturer's failure to disclose the nonconformity and shall be directly liable under this section to a consumer who purchases a nonconforming implement of husbandry without having received the disclosure required under this section.”.

AB631-AA2,2,11 (End)