NR 809.25(1)(g)(g) Analysis under this section shall be conducted by a laboratory certified under ch. NR 149 using EPA methods 502.2, 524.2, 524.3, 551.1 for contaminants listed in par. (e) and EPA methods listed in s. NR 809.203, Table CM for contaminants listed in par. (f).

NR 809.25(2)(2) Sulfate monitoring. Monitoring for sulfate shall be conducted as required by the department.

NR 809.25(3)(3) Reporting requirements. Reporting requirements under this section shall be as required under s. NR 809.80.

NR 809.25(4)(4) Treatment techniques for acrylamide and epichlorohydrin. In lieu of MCLs and monitoring for acrylamide and epichlorohydrin, the following treatment techniques and reporting are required. Each water supplier for public water system shall certify annually in writing to the department using third party or manufacturer’s certification, that when acrylamide and epichlorohydrin are used in the treatment of drinking water, the combination, or product, of dose and monomer level does not exceed the levels specified as follows:

NR 809.25(4)(c)(c) A water supplier may rely on certification from manufacturers or third parties, as approved by the department.

NR 809.25 HistoryHistory: CR 09-073: cr. Register November 2010 No. 659, eff. 12-1-10; CR 15-049: am. (1) (g) Register March 2016 No. 723, eff. 4-1-16.

NR 809.30NR 809.30 Distribution system microbiological contaminant maximum contaminant levels. The following are the maximum contaminant levels for coliform bacteria applicable to public water systems.

NR 809.30(1)(1) MCL for escherichia coli (E. Coli).

NR 809.30(1)(a)1.1. The public water system has an E. coli-positive repeat sample following a total coliform-positive routine sample.