HC is the mass of organic HAP emission reduction for the controlled coating operation during the month, kg (lb)

AC is the total mass of organic HAP in the coatings used in the controlled coating operation during the month, kg (lb), as calculated in Equation 1A of this subsection

BC is the total mass of organic HAP in the thinners and other additives used in the controlled coating operation during the month, kg (lb), as calculated in Equation 1B of this subsection

CC is the total mass of organic HAP in the cleaning materials used in the controlled coating operation during the month, kg (lb), as calculated in Equation 1C of this subsection

RW is the total mass of organic HAP in waste materials sent or designated for shipment to a hazardous waste TSDF for treatment or disposal during the compliance period, kg (lb), determined according to s. NR 465.47 (2) (e) 2. You may assign a value of zero to RW if you do not wish to use this allowance.

HUNC is the total mass of organic HAP in the coatings, thinners and other additives, and cleaning materials used during all deviations specified in sub. (4) (c) and (d) that occurred during the month in the controlled coating operation, kg (lb), as calculated in Equation 1D of this subsection

CE is the capture efficiency of the emission capture system vented to the add-on control device, percent. Use the test methods and procedures specified in subs. (5) and (6) to measure and record capture efficiency.

DRE is the organic HAP destruction or removal efficiency of the add-on control device, percent. Use the test methods and procedures in subs. (5) and (7) to measure and record the organic HAP destruction or removal efficiency.

å

=

=

(Equation 1A)

where:

AC is the total mass of organic HAP in the coatings used in the controlled coating operation during the month, kg (lb)

Volc,i is the total volume of coating i used during the month, liters (gallons)

Dc,i is the density of coating i, kg per liter (lb per gallon)

Wc,i is the mass fraction of organic HAP in coating i, kg per kg (lb per lb). For reactive adhesives, use the mass fraction of organic HAP that is emitted as determined using the method in to 40 CFR part 63, Subpart PPPP, Appendix A, incorporated by reference in s. NR 484.04 (24r).

m is the number of different coatings used

å

=

=

(Equation 1B)

where:

BC is the total mass of organic HAP in the thinners and other additives used in the controlled coating operation during the month, kg (lb)

Volt,j is the total volume of thinner or other additive j used during the month, liters (gallons)

Dt,j is the density of thinner or other additive j, kg per liter (lb per gallon)

Wt,j is the mass fraction of organic HAP in thinner or other additive, j, kg per kg (lb per lb). For reactive adhesives, use the mass fraction of organic HAP that is emitted as determined using the method in 40 CFR part 63, Subpart PPPP, Appendix A, incorporated by reference in s. NR 484.04 (24r).

n is the number of different thinners and other additives used

å

=

=

(Equation 1C)

where:

CC is the total mass of organic HAP in the cleaning materials used in the controlled coating operation during the month, kg (lb)

Vols,k = Total volume of cleaning material, k, used during the month, liters (gallons)