NR 422.02(41m)(d)(d) Promoting a uniform surface necessary for filling in surface imperfections.
NR 422.02(41s)(41s)“High gloss coating” means a coating that achieves at least 85 percent reflectance on a 60° glossmeter when tested by ASTM D523-89, incorporated by reference under s. NR 484.10 (9).
NR 422.02(42)(42)“High performance architectural coatings” means a coating which meets the requirements specified in American architectural manufacturers association publication number AAMA 2604-98, incorporated by reference in s. NR 484.11 (1).
NR 422.02(42d)(42d)“High temperature coating” means a coating that is certified to withstand a temperature of 1000°F for 24 hours.
NR 422.02(42h)(42h)“High-volume, low-pressure spray” means equipment used to apply coatings by means of a spray gun that operates between 0.1 and 10 psig air pressure.
NR 422.02 NoteNote: High-volume, low-pressure is also referred to as HVLP.
NR 422.02(42m)(42m)“Impact-resistant coating” means a coating designed to resist chipping caused by road debris.
NR 422.02(42s)(42s)
NR 422.02(42s)(a)(a) “Indoor floor covering installation adhesive” means any adhesive intended by the manufacturer for use in the installation of wood flooring, carpet, resilient tile, vinyl tile, vinyl backed carpet, resilient sheet and roll, or artificial grass.
NR 422.02(42s)(b)(b) “Indoor floor covering installation adhesive” does not include an adhesive used to install ceramic tile and perimeter bonded sheet flooring with vinyl backing onto a non-porous substrate, such as flexible vinyl.
NR 422.02(43)(43)“Ink transfer” means a decal, printed using screen printing onto a special release carrier, that will be transferred from the carrier to a substrate. Final transfer of the decal to the substrate may or may not occur at the screen printing facility.
NR 422.02(44)(44)“Interior body spray” means a coating sprayed on the interior of the can body to provide a protective film between the product and the can.
NR 422.02(45)(45)“Interior sheet base coating” means a coating applied by roller coater or spray to the interior side of sheets from which cans are formed to provide a protective lining between the can metal and product.
NR 422.02(45e)(45e)“Janitorial supplies” means cleaners, including detergent-based products, used for floor cleaning and other general cleaning purposes, except for those products used to clean spilled ink.
NR 422.02(45m)(45m)“Lacquer” means a thermoplastic coating which dries primarily by solvent evaporation and which is resoluble in its original solvent.
NR 422.02(45s)(45s)“Laminate” means a product made by bonding together 2 or more layers of material.
NR 422.02(46)(46)“Large appliances” means doors, cases, lids, panels and interior support parts of residential and commercial washers, dryers, ranges, refrigerators, freezers, water heaters, dishwashers, trash compactors, air conditioners and other similar products. Not included are products of such weight that they are normally lifted only with powered lifting equipment or products which are intended to be permanently fastened in place.
NR 422.02(47)(47)“Leather coating” means the coating of any raw or processed leather material with a roll coater, spray system or other coating applicator to impart or enhance properties such as strength, stability, water or acid repellency, color or appearance.
NR 422.02(48)(48)“Lithographic printing” means a planographic printing process where the image and nonimage areas are chemically differentiated; the image area is oil receptive and the nonimage area is typically water receptive.
NR 422.02(49)(49)“Lithographic printing press” means a printing production assembly comprised of one or more inking and fountain solution dampening systems and includes any associated cleaning solutions, ovens, dryers, flashoff areas and chillers.
NR 422.02(49m)(49m)“Low-gloss coating” means a coating which exhibits a gloss reading of less than or equal to 25 on a 60-degree glossmeter, as measured according to ASTM D523-89, incorporated by reference in s. NR 484.10 (9).
NR 422.02(50)(50)“Low-pressure spray method” means any coating method in which an object is coated with an air-atomizing spray gun that operates at no more than 69 kPa (10.0 psig) air pressure.
NR 422.02(51)(51)“Low solvent coating or ink” means a coating or ink which contains less organic solvent than the conventional coatings used by the particular industry. Low solvent coatings or inks include waterborne, higher solids, electrodeposition and powder coatings or inks.
NR 422.02(52)(52)“Magnet wire coating” means the process of applying a coating of electrically insulating varnish or enamel to aluminum or copper wire for use in electrical machinery.
NR 422.02(53)(53)“Manufacturing plant” means a facility where parts are manufactured, finished or assembled for eventual inclusion into a finished product ready for sale to retailers. With respect to the manufacture of motor vehicles, customizers, body shops and other repainters are not included in this definition.
NR 422.02(53e)(53e)“Mask coating” means a strippable coating used as a mask during the coating of a part or surface.
NR 422.02(53i)(53i)“Metallic coating” means a coating which contains more than 5 grams of metal particles per liter of coating, as applied.
NR 422.02(53j)(53j)“Metal to urethane/rubber molding or casting adhesive” means any adhesive intended by the manufacturer to bond metal to high density or elastomeric urethane or molded rubber materials, in heater molding or casting processes, to fabricate products such as rollers for computer printers or other paper handling equipment.
NR 422.02(53k)(53k)“Military specification coating” means a coating that has a formulation approved by a United States military agency for use on military equipment.