NR 297.01NR 297.01 Applicability; description of the barking subcategory. This subchapter applies to the discharge of pollutants to waters of the state and the introduction of pollutants into POTWs from the barking of logs by plants in the lumber and wood products industry, except for furniture making, and plants producing insulation board. NR 297.01 HistoryHistory: Cr. Register, April, 1989, No. 400, eff. 5-1-89. NR 297.011NR 297.011 Effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available. Except as provided in 40 CFR 125.30 to 125.32, any existing point source subject to this subchapter shall achieve the following effluent limitations representing the degree of effluent reduction attainable by application of BPT. NR 297.011(1)(1) Mechanical barking installations may not discharge process wastewater pollutants into waters of the state. NR 297.011(2)(2) The following limitations apply to hydraulic barking installations: NR 297.011 HistoryHistory: Cr. Register, April, 1989, No. 400, eff. 5-1-89. NR 297.013NR 297.013 New source performance standards. The discharge of wastewater pollutants from any new source subject to this subchapter may not exceed the following standards. NR 297.013(1)(1) Mechanical barking installations may not discharge process wastewater pollutants into waters of the state. NR 297.013 HistoryHistory: Cr. Register, April, 1989, No. 400, eff. 5-1-89. NR 297.014NR 297.014 Pretreatment standards for existing sources. Any existing source subject to this subchapter which introduces pollutants into a POTW shall comply with ch. NR 211. NR 297.014 HistoryHistory: Cr. Register, April, 1989, No. 400, eff. 5-1-89. NR 297.015NR 297.015 Pretreatment standards for new sources. Any new source subject to this subchapter which introduces pollutants into a POTW shall comply with ch. NR 211. NR 297.015 HistoryHistory: Cr. Register, April, 1989, No. 400, eff. 5-1-89. NR 297.02NR 297.02 Applicability; description of the veneer subcategory. This subchapter applies to the discharge of pollutants to waters of the state and the introduction of pollutants into POTWs from any plant which manufactures veneer and does not store or hold raw materials in wet storage conditions. NR 297.02 HistoryHistory: Cr. Register, April, 1989, No. 400, eff. 5-1-89. NR 297.021NR 297.021 Effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available. Except as provided in 40 CFR 125.30 to 125.32, any existing point source subject to this subchapter shall achieve the following effluent limitations representing the degree of effluent reduction attainable by application of BPT. NR 297.021(1)(1) Except for the installations subject to subs. (2) and (3), veneer manufacturing installations may not discharge process wastewater pollutants into waters of the state. NR 297.021(2)(2) The following limitations apply to softwood veneer manufacturing processes which use direct steaming for the conditioning of logs: NR 297.021(3)(3) The following limitations apply to hardwood veneer manufacturing processes which use direct steaming for the conditioning of logs: NR 297.021 HistoryHistory: Cr. Register, April, 1989, No. 400, eff. 5-1-89. NR 297.022NR 297.022 Effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable. Except as provided in 40 CFR 125.30 to 125.32, any existing point source subject to this subchapter may not discharge process wastewater pollutants into waters of the state. NR 297.022 HistoryHistory: Cr. Register, April, 1989, No. 400, eff. 5-1-89. NR 297.023NR 297.023 New source performance standards. Any new source subject to this subchapter may not discharge wastewater pollutants to waters of the state.