NR 422.02(37)(37) “Fountain solution” means a mixture of water, volatile and nonvolatile chemicals and other additives which is applied to the image plate to maintain the hydrophilic properties of the nonimage areas of the printing plate surface. NR 422.02(37m)(37m) “Fountain solution reservoir” means the collection tank that accepts fountain solution recirculated from printing units. NR 422.02(38)(38) “Furniture metal coating” means the surface coating of any furniture made of metal or any metal part which will be assembled with other metal, wood, fabric, plastic or glass parts to form a furniture piece. NR 422.02(38m)(38m) “Gloss reducer” means a coating that is applied to a plastic part solely to reduce the shine of the part and that is not applied at a thickness of more than 0.5 mils of coating solids. NR 422.02(39)(39) “Hardboard” means a panel manufactured primarily from interfelted ligno-cellulosic fibers which are consolidated under heat and pressure in a hot press. NR 422.02(39m)(39m) “Hardener” means a coating component specifically designed to promote a faster cure of an enamel finish. NR 422.02(40)(40) “Hardwood plywood” means a plywood whose surface layer is a veneer of hardwood. NR 422.02(40m)(40m) “Heat-resistant coating” means a coating that must withstand a temperature of at least 400°F during normal use. NR 422.02(41)(41) “Heatset” means a lithographic web printing process where solvents from the printing ink are evaporated by heat from a dryer. NR 422.02(41e)(41e) “High bake” means a coating that is designed to cure only at temperatures of more than 194°F. NR 422.02(41m)(41m) “High build primer surfacer” means a coating applied with a wet film thickness of 10 mils or more prior to the application of a topcoat for any of the following purposes: NR 422.02(41m)(d)(d) Promoting a uniform surface necessary for filling in surface imperfections. NR 422.02(41s)(41s) “High gloss coating” means a coating that achieves at least 85 percent reflectance on a 60° glossmeter when tested by ASTM D523-89, incorporated by reference under s. NR 484.10 (9). NR 422.02(42)(42) “High performance architectural coatings” means a coating which meets the requirements specified in American architectural manufacturers association publication number AAMA 2604-98, incorporated by reference in s. NR 484.11 (1). NR 422.02(42d)(42d) “High temperature coating” means a coating that is certified to withstand a temperature of 1000°F for 24 hours. NR 422.02(42h)(42h) “High-volume, low-pressure spray” means equipment used to apply coatings by means of a spray gun that operates between 0.1 and 10 psig air pressure. NR 422.02 NoteNote: High-volume, low-pressure is also referred to as HVLP.
NR 422.02(42m)(42m) “Impact-resistant coating” means a coating designed to resist chipping caused by road debris. NR 422.02(42s)(a)(a) “Indoor floor covering installation adhesive” means any adhesive intended by the manufacturer for use in the installation of wood flooring, carpet, resilient tile, vinyl tile, vinyl backed carpet, resilient sheet and roll, or artificial grass. NR 422.02(42s)(b)(b) “Indoor floor covering installation adhesive” does not include an adhesive used to install ceramic tile and perimeter bonded sheet flooring with vinyl backing onto a non-porous substrate, such as flexible vinyl. NR 422.02(43)(43) “Ink transfer” means a decal, printed using screen printing onto a special release carrier, that will be transferred from the carrier to a substrate. Final transfer of the decal to the substrate may or may not occur at the screen printing facility. NR 422.02(44)(44) “Interior body spray” means a coating sprayed on the interior of the can body to provide a protective film between the product and the can. NR 422.02(45)(45) “Interior sheet base coating” means a coating applied by roller coater or spray to the interior side of sheets from which cans are formed to provide a protective lining between the can metal and product. NR 422.02(45e)(45e) “Janitorial supplies” means cleaners, including detergent-based products, used for floor cleaning and other general cleaning purposes, except for those products used to clean spilled ink. NR 422.02(45m)(45m) “Lacquer” means a thermoplastic coating which dries primarily by solvent evaporation and which is resoluble in its original solvent.