NR 466.03(23)(23)Mfi is the organic volatile matter mass flow rate at the inlet to the control device, in kg/hr (lb/hr).
NR 466.03(24)(24)Mfo is the organic volatile matter mass flow rate at the outlet of the control device, in kg/hr (lb/hr).
NR 466.03(25)(25)Mhu is the mass of organic HAP used in a month, in kg (lb).
NR 466.03(26)(26)Mi is the mass of solids-containing material, i, applied in a month, in kg (lb).
NR 466.03(27)(27)Mij is the mass of solvent, thinner, reducer, diluent or other non-solids-containing material, j, added to solids-containing material, i, in a month, in kg (lb).
NR 466.03(28)(28)Mj is the mass of solvent, thinner, reducer, diluent or other non-solids-containing material, j, applied in a month, in kg (lb).
NR 466.03(29)(29)MLj is the mass of solvent, thinner, reducer, diluent or other non-solids-containing material, j, added to solids-containing materials which were applied at less than 20% by weight solids content, on an as-applied basis, in a month, in kg (lb).
NR 466.03(30)(30)Mvr is the mass of volatile matter recovered in a month, in kg (lb).
NR 466.03(31)(31)Mvu is the mass of volatile matter, including water, used in a month, in kg (lb).
NR 466.03(32)(32)MWi is the molecular weight of compound i in the vent gas, kg/kg-mol.
NR 466.03(33)(33)n is the number of organic compounds in the vent gas.
NR 466.03(34)(34)p is the number of different inks, coatings, varnishes, adhesives, primers and other solids-containing materials applied in a month.
NR 466.03(35)(35)q is the number of different solvents, thinners, reducers, diluents or other non-solids-containing materials applied in a month.
NR 466.03(36)(36)Qsd is the volumetric flow rate of gases entering or exiting the control device in dscm/hr, as determined by Method 2 in 40 CFR Part 60, Appendix A, incorporated by reference in s. NR 484.04.
NR 466.03(37)(37)R is the overall organic HAP control efficiency as a percent.
NR 466.03(38)(38)Re is the overall effective organic HAP control efficiency for publication rotogravure as a percent.
NR 466.03(39)(39)Rv is the organic volatile matter collection and recovery efficiency as a percent.
NR 466.03(40)(40)S is the mass organic HAP emission rate per mass of material applied, in kg/kg (lb/lb).
NR 466.03(41)(41)0.0416 is the conversion factor for molar volume, kg-mol/m3, at standard conditions.
NR 466.03 HistoryHistory: Cr. Register, March, 2000, No. 531, eff. 4-1-00.
NR 466.05NR 466.05Standards: general. General provisions of ch. NR 460 apply to owners and operators of affected sources subject to this chapter as indicated in ch. NR 460 Appendix KK.
NR 466.05 HistoryHistory: Cr. Register, March, 2000, No. 531, eff. 4-1-00.
NR 466.06NR 466.06Standards: publication rotogravure printing.
NR 466.06(1)(1)Compliance dates. Each owner or operator of any publication rotogravure printing affected source that is subject to the requirements of this chapter shall comply with this section on and after the compliance dates as specified in s. NR 466.08.
NR 466.06(2)(2)Emission limitation. The owner or operator of each publication rotogravure affected source shall limit organic HAP emissions to no more than 8% of the total volatile matter used each month.
NR 466.06(3)(3)Compliance methods. The emission limitation in sub. (2) shall be achieved by any of the following methods:
NR 466.06(3)(a)(a) Overall control of at least 92% of organic HAP used.
NR 466.06(3)(b)(b) Substitution of non-HAP materials for organic HAP.
NR 466.06(3)(c)(c) A combination of capture and control technologies and substitution of materials.